Commission Decision of 27 April 2011 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (notified under document C(2011) 2772) (2011/278/EU) (repealed)

Article 6 Division into sub-installations

1. For the purposes of this Decision, Member States shall divide each installation eligible for the free allocation of emission allowances under Article 10a of Directive 2003/87/EC into one or more of the following sub-installations, as required:

(a) a product benchmark sub-installation;

(b) a heat benchmark sub-installation;

(c) a fuel benchmark sub-installation;

(d) a process emissions sub-installation.

Sub-installations shall correspond, to the extent possible, to physical parts of the installation.

For heat benchmark sub-installations, fuel benchmark sub-installations and process emissions sub-installations, Member States shall clearly distinguish on the basis of NACE and Prodcom codes between whether or not the relevant process serves a sector or subsector deemed to be exposed to a significant risk of carbon leakage as determined by Decision 2010/2/EU.

Where an installation included in the Union scheme has produced and exported measurable heat to an installation or other entity not included in the Union scheme, Member States shall consider that the relevant process of the heat benchmark sub-installation for this heat does not serve a sector or subsector deemed to be exposed to a significant risk of carbon leakage as determined by Decision 2010/2/EU unless the competent authority is satisfied that the consumer of the measurable heat belongs to a sector or subsector deemed to be exposed to a significant risk of carbon leakage as determined by Decision 2010/2/EU.

2. The sum of the inputs, outputs and emissions of each sub-installation shall not exceed the inputs, outputs and total emissions of the installation.