- Latest available (Revised)
- Point in Time (14/06/2014)
- Original (As adopted by EU)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 31/12/2020
Point in time view as at 14/06/2014.
There are currently no known outstanding effects for the Commission Implementing Decision of 1 March 2012 as regards emergency measures to prevent the introduction into and the spread within the Union of Anoplophora chinensis (Forster) (notified under document C(2012) 1310) (2012/138/EU), Division 1..
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
that the plants have been grown throughout their life in a place of production which is registered and supervised by the national plant protection organisation in the country of origin and situated in a pest-free area established by that organisation in accordance with relevant International Standards for Phytosanitary Measures. The name of the pest-free area shall be mentioned under the rubric ‘place of origin’; or
[F1that the plants have been grown during a period of at least two years prior to export, or in the case of plants which are younger than two years have been grown throughout their life, in a place of production established as free from Anoplophora chinensis (Forster) in accordance with International Standards for Phytosanitary Measures:]
which is registered and supervised by the national plant protection organisation in the country of origin; and
which has been subjected annually to at least two official meticulous inspections for any sign of Anoplophora chinensis (Forster) carried out at appropriate times and no signs of the organism have been found; and
where the plants have been grown in a site:
with complete physical protection against the introduction of Anoplophora chinensis (Forster), or
with the application of appropriate preventive treatments and surrounded by a buffer zone with a radius of at least 2 km where official surveys for the presence or signs of Anoplophora chinensis (Forster) are carried out annually at appropriate times. In case signs of Anoplophora chinensis (Forster) are found, eradication measures are immediately taken to restore the pest freedom of the buffer zone; and
where immediately prior to export consignments of the plants have been subjected to an official meticulous inspection, for the presence of the specified organism, in particular in roots and stems of the plants. This inspection shall include targeted destructive sampling. The size of the sample for inspection shall be such as to enable at least the detection of 1 % level of infestation with a level of confidence of 99 %; or
that the plants have been grown from rootstocks which meet the requirements of point (b), grafted with scions which meet the following requirements:
at the time of export, the grafted scions are no more than 1 cm in diameter at their thickest point;
the grafted plants have been inspected in accordance with point (b)(iv).
Textual Amendments
F1 Substituted by Commission Implementing Decision of 12 June 2014 amending Implementing Decision 2012/138/EU as regards the conditions of introduction into and movement within the Union of specified plants to prevent the introduction and the spread of Anoplophora chinensis (Forster) (notified under document C(2014) 3798) (2014/356/EU).
that the plants have been grown throughout their life in a place of production which is registered and supervised by the national plant protection organisation of China and situated in a pest-free area established by that organisation in accordance with relevant International Standards for Phytosanitary Measures. The name of the pest-free area shall be mentioned under the rubric ‘place of origin’; or
[F1that the plants have been grown during a period of at least two years prior to export, or in the case of plants which are younger than two years have been grown throughout their life, in a place of production established as free from Anoplophora chinensis (Forster) in accordance with International Standards for Phytosanitary Measures:]
which is registered and supervised by the national plant protection organisation of China; and
which has been subjected annually to at least two official inspections for any sign of Anoplophora chinensis (Forster) carried out at appropriate times and no signs of the organism have been found; and
where the plants have been grown in a site:
with complete physical protection against the introduction of Anoplophora chinensis (Forster), or
with the application of appropriate preventive treatments and surrounded by a buffer zone with a radius of at least 2 km where official surveys for the presence or signs of Anoplophora chinensis (Forster) are carried out annually at appropriate times. In case signs of Anoplophora chinensis (Forster) are found, eradication measures are immediately taken to restore the pest freedom of the buffer zone; and
where immediately prior to export consignments of the plants have been subjected to an official meticulous inspection, including targeted destructive sampling on each lot, for the presence of Anoplophora chinensis (Forster), in particular in roots and stems of the plants.
The size of the sample for inspection shall be such as to enable at least the detection of 1 % level of infestation with a level of confidence of 99 %; or
that the plants have been grown from rootstocks which meet the requirements of (b), grafted with scions which meet the following requirements:
at the time of export, the grafted scions are no more than 1 cm in diameter at their thickest point;
the grafted plants have been inspected in accordance with point (b)(iv);
the registration number of the place of production.
The destructive sampling referred to in the first paragraph shall be carried out at the level set out in the following table:
Number of plants in the lot | Level of destructive sampling (number of plants to be cut) |
---|---|
1 – 4 500 | 10 % of lot size |
> 4 500 | 450 |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: