- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As adopted by EU)
Commission Implementing Decision (EU) 2019/1713 of 9 October 2019 establishing the format of information to be made available by the Member States for the purposes of reporting on the implementation of Directive (EU) 2015/2193 of the European Parliament and of the Council (notified under document C(2019) 7133) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Point in time view as at 31/12/2020.
There are currently no known outstanding effects for the Commission Implementing Decision (EU) 2019/1713, ANNEX.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Note. The obligation to supply the information required by January 2021 predates the need for existing Medium Combustion Plants to be permitted or registered. In view of this, when completing the report [F1competent authorities] will need to rely on data that they have available at that time. In cases where they do not have data available they shall complete the report using their best estimates. For these reasons a distinction is made between new and existing plants and plants above and below 20MWth.
Textual Amendments
F1Words in Annex substituted (31.12.2020) by S.I. 2018/1407, reg. 24C(5) (as inserted by The Environment (Miscellaneous Amendments) (EU Exit) Regulations 2020 (S.I. 2020/1313), regs. 1(3), 5(3))
This table provides the plant categories to be used for providing the information required under parts 2 and 3(1).
a For new medium combustion plants, the total rated thermal input may be used. | |
1.1. New or existing | As defined under Article 3(6) and (7) of Directive (EU) 2015/2193 |
1.2. Capacity classes (rated thermal input)a |
|
1.3. Plant types |
|
1.4. Fuel types |
|
a Preferably 2019. If not possible, 2018. | |
2.1. Country | Identification of the country submitting the report |
2.2. Competent Authority | Identification of the competent authority responsible for the report (department, address, phone number and email) |
2.3. Number of plants | Number of plants for each plant category |
2.4. Reporting year | Calendar year to which the reporting refersa |
3.1. CO concentrations | Estimated average concentration of carbon monoxide expressed in mg/Nm3 at the reference oxygen level used to express ELVs of the regulated pollutant and dry air for each plant category |
3.2. CO emissions | Estimated emissions of carbon monoxide expressed as the total quantity in tonnes per calendar year discharged by plants for each plant category |
3.3. Energy input | Estimated total fuel used by the plants expressed in Tera Joules per year for each plant category |
3.4. Total aggregated capacity | Estimated total installed capacity expressed as the sum of the rated thermal input of all the plants for each plant category |
Example of category: New boilers greater than 5 MWth and less than or equal to 20 MWth combusting liquid fuels other than gas oil.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: