F1ANNEX IIIAMODEL
(maximum format: A4 (210 × 297 mm))
F1EC TYPE-APPROVAL CERTIFICATE
Communication concerning the:
of a type of vehicle/component/separate technical unit18 with regard to F1Directive 75/322/EEC, as last amended by Directive …/…/EC.
Type approval number:
Reason for extension:
SECTION I
0.1.
Make (trade name of manufacturer):
0.2.
Type and general commercial description(s):
0.3.
0.3.1.
Location of that marking:
0.4.
F1Vehicle:
0.5.
Name and address of manufacturer:
0.7.
In the case of components and separate technical units, location and method of affixing of the EEC approval-mark:
0.8.
Address(es) of assembly plant(s):
SECTION II
1.
Additional information (where applicable): See Appendix
2.
Technical service responsible for carrying out the tests:
3.
Date of test report:
4.
Number of test report:
5.
Remarks (if any): See Appendix
6.
Place:
7.
Date:
8.
Signature:
9.
The index to the information package lodged with the approval authority, which may be obtained on request is attached
1.
Additional information
1.1.
Special devices for the purpose of Annex IV to this Directive (if applicable): (e.g. …)
1.2.
Electrical system rated voltage: … V. positive/negative ground
1.3.
Type of bodywork:
1.4.
List of electronic systems installed in the tested vehicle(s) not limited to the items in the information document (see Appendix 1 to Annex II):
1.5.
Approved/recognized laboratory (for the purpose of this Directive) responsible for carrying out the tests:
5.
Remarks:
(e.g. valid for both left-hand drive and right-hand drive vehicles)
Substituted by Commission Directive 2000/2/EC of 14 January 2000 adapting to technical progress Council Directive 75/322/EEC relating to the suppression of radio interference produced by spark-ignition engines fitted to wheeled agricultural or forestry tractors and Council Directive 74/150/EEC relating to the type-approval of wheeled agricultural or forestry tractors (Text with EEA relevance).