[F1ANNEX IIIA U.K. MODEL (maximum format: A4 (210 × 297 mm))

Textual Amendments

[F1EC TYPE-APPROVAL CERTIFICATE] U.K.

Communication concerning the:

  • type-approval (1)

  • extension of type-approval (1)

  • refusal of type-approval (1)

  • withdrawal of type-approval (1)

of a type of vehicle/component/separate technical unit (1) with regard to [F1Directive 75/322/EEC] , as last amended by Directive …/…/EC.

Type approval number:

Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer): U.K.
0.2. Type and general commercial description(s): U.K.
0.3. Means of identification of type, if marked on the vehicle/component/separate technical unit (1) (2) : U.K.
0.3.1. Location of that marking: U.K.
0.4. [F1Vehicle] : U.K.
0.5. Name and address of manufacturer: U.K.
0.7. In the case of components and separate technical units, location and method of affixing of the EEC approval-mark: U.K.
0.8. Address(es) of assembly plant(s): U.K.

SECTION II U.K.

1. Additional information (where applicable): See Appendix U.K.
2. Technical service responsible for carrying out the tests: U.K.
3. Date of test report: U.K.
4. Number of test report: U.K.
5. Remarks (if any): See Appendix U.K.
6. Place: U.K.
7. Date: U.K.
8. Signature: U.K.
9. The index to the information package lodged with the approval authority, which may be obtained on request is attached U.K.

[F1Appendix to EC type-approval certificate No… concerning the type-approval of a vehicle with regard to Directive 75/322/EEC, as last amended by Directive 2000/2/EC]

1. Additional information U.K.

1.1. Special devices for the purpose of Annex IV to this Directive (if applicable): (e.g. …) U.K.
1.2. Electrical system rated voltage: … V. positive/negative ground U.K.
1.3. Type of bodywork: U.K.
1.4. List of electronic systems installed in the tested vehicle(s) not limited to the items in the information document (see Appendix 1 to Annex II): U.K.
1.5. Approved/recognized laboratory (for the purpose of this Directive) responsible for carrying out the tests: U.K.

5. Remarks: U.K.

(e.g. valid for both left-hand drive and right-hand drive vehicles)]

(1)

[F1Delete where not applicable.

(2)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this type-approval certificate such characters shall be represented in the documentation by the symbol: ‘ ? ’ (e.g. ABC??123??).]

Textual Amendments