Article 1

1

This Directive is a specific Directive within the meaning of Article 3 of Directive 76/893/EEC.

2

This Directive concerns the possible migration of lead and cadmium from ceramic articles which, in their finished state, are intended to come into contact with foodstuffs, or which are in contact with foodstuffs, and are intended for that purpose.

3

'Ceramic articles' means articles manufactured from a mixture of inorganic materials with a generally high argillaceous or silicate content to which small quantities of organic materials may have been added. These articles are first shaped and the shape thus obtained is permanently fixed by firing. They may be glazed, enamelled and/or decorated.

Article 2

1

The quantities of lead and cadmium transferred from ceramic articles shall not exceed the limits laid down below.

2

The quantities of lead and cadmium transferred from ceramic articles shall be determined by means of a test, the conditions of which are specified in Annex I, using the method of analysis described in Annex II.

3

Where a ceramic article consists of a vessel fitted with a ceramic lid, the lead and/or cadmium limit which may not be exceeded (mg/dm2 or mg/litre) shall be that which applies to the vessel alone.

The vessel alone and the inner surface of the lid shall be tested separately and under the same conditions.

The sum of the two lead and/or cadmium extraction levels thus obtained shall be related as appropriate to the surface area or the volume of the vessel alone.

4

A ceramic article shall be recognized as satisfying the requirements of this Directive if the quantities of lead and/or cadmium extracted during the test carried out under the conditions laid down in Annexes I and II do not exceed the following limits:

Pb

Cd

— Category 1

Articles which cannot be filled and articles which can be filled, the internal depth of which, measured from the lowest point to the horizontal plane passing through the upper rim, does not exceed 25 mm

0,8 mg/dm2

0,07 mg/dm2

— Category 2

All other articles which can be filled

4,0 mg/l

0,3 mg/l

— Category 3

Cooking ware; packaging and storage vessels having a capacity of more than three litres

1,5 mg/l

0,1 mg/l

5

However, where a ceramic article does not exceed the above quantities by more than 50 %, that article shall nevertheless be recognized as satisfying the requirements of this Directive if at least three other articles with the same shape, dimensions, decoration and glaze are subjected to a test carried out under the conditions laid down in Annexes I and II and the average quantities of lead and/or cadmium extracted from those articles do not exceed the limits set, with none of those articles exceeding those limits by more than 50 %.

F1Article 2a

1

At the marketing stages up to and including the retail stage, ceramic articles which are not yet in contact with foodstuffs shall be accompanied by a written declaration in accordance with Article 16 of Regulation (EC) No 1935/2004 of the European Parliament and of the Council4.

That declaration shall be issued by the manufacturer or by a seller established within the Community and shall contain the information laid down in Annex III to this Directive.

2

Appropriate documentation to demonstrate that the ceramic articles comply with the migration limits for lead and cadmium set out in Article 2 shall be made available by the manufacturer or the importer into the Community to the national competent authorities on request. That documentation shall contain the results of the analysis carried out, the test conditions and the name and the address of the laboratory that performed the testing.

Article 3

The amendments to be made to the Annexes in the light of developments in scientific and technical knowledge, with the exception of sections 1 and 2 of Annex I, shall be adopted in accordance with the procedure laid down in Article 10 of Directive 76/893/EEC.

Article 4

1

Within three years of notification5 of this Directive, the Council shall determine in accordance with the procedure laid down in Article 100 of the Treaty:

a

the limitations to be imposed on those areas of ceramic articles with which the mouth is intended to come into contact;

b

the methods for checking that the limitations provided for in (a) are complied with.

2

Within the same period, the Commission shall, on the basis of toxicological and technological data, re-examine the limits laid down in Article 2, with a view to reducing them, and the lighting conditions for the test specified in Annex I, and shall, if appropriate, submit to the Council proposals for amendments to the Directive.

Article 5

1

The Member States shall, if necessary, amend their national laws to comply with this Directive so that:

  • three years after the notification of this Directive, trade in ceramic articles which comply with its provisions is permitted,

  • five years after the notification of this Directive, the plating on the market of ceramic articles which do not comply with its provisions is prohibited.

They shall forthwith inform the Commission of any such amendment.

2

Without prejudice to paragraph 1, Member States may prohibit or continue to prohibit the manufacture of ceramic articles which do not comply with this Directive.

Article 6

This Directive is addressed to the Member States.