- Latest available (Revised)
- Point in Time (01/01/2006)
- Original (As adopted by EU)
Council directive 92/23/EEC (repealed)Show full title
Council directive 92/23/EEC of 31 March 1992 relating to tyres for motor vehicles and their trailers and to their fitting (repealed)
You are here:
- Directives originating from the EU
- 1992 No. 23
- ANNEX II
- Appendix 5
- PART B: COMMERCIAL VEHICLE TYRES
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Revised version PDFs
- Revised 01/01/20060.61 MB
- Revised 04/08/20010.71 MB
- Revised 01/01/19950.49 MB
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
This item of legislation originated from the EU
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Changes over time for: PART B: COMMERCIAL VEHICLE TYRES
Version Superseded: 31/10/2017
Alternative versions:
Status:
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
PART B: COMMERCIAL VEHICLE TYRESU.K.
| TABLE 1 | |||
| Commercial vehicle tyres | |||
| RADIAL NORMAL SECTION SIZES MOUNTED ON 5o-TAPERED OR FLAT BASE RIMS | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 6.50 R 20 | 5.00 | 860 | 181 |
| 7.00 R 16 | 5.50 | 784 | 198 |
| 7.00 R 18 | 5.50 | 842 | 198 |
| 7.00 R 20 | 5.50 | 892 | 198 |
| 7.50 R 16 and/or A16 or 1-16 | 6.00 | 802 | 210 |
| 7.50 R 17 and/or A17 or 1-17 | 6.00 | 852 | 210 |
| 7.50 R 20 and/or A20 or 1-20 | 6.00 | 928 | 210 |
| 8.25 R 16 and/or B16 or 2-16 | 6.50 | 860 | 230 |
| 8.25 R 17 and/or B17 or 2-17 | 6.50 | 886 | 230 |
| 8.25 R 20 and/or B20 or 2-20 | 6.50 | 962 | 230 |
| 9.00 R 16 and/or C16 or 3-16 | 6.50 | 912 | 246 |
| 9.00 R 20 and/or C20 or 3-20 | 7.00 | 1 018 | 258 |
| 10.00 R 20 and/or D20 or 4-20 | 7.50 | 1 052 | 275 |
| 10.00 R 22 and/or D22 or 4-22 | 7.50 | 1 102 | 275 |
| 11.00 R 16 | 6.50 | 980 | 279 |
| 11.00 R 20 and/or E20 or 5-20 | 8.00 | 1 082 | 286 |
| 11.00 R 22 and/or E22 or 5-22 | 8.00 | 1 132 | 286 |
| 11.00 R 24 and/or E24 or 5-24 | 8.00 | 1 182 | 286 |
| 12.00 R 20 and/or F20 or 6-20 | 8.50 | 1 122 | 313 |
| 12.00 R 22 | 8.50 | 1 174 | 313 |
| 12.00 R 24 and/or F24 or 6-24 | 8.50 | 1 226 | 313 |
| 13.00 R 20 | 9.00 | 1 176 | 336 |
| 14.00 R 20 and/or G20 or 7-20 | 10.00 | 1 238 | 370 |
| 14.00 R 22 | 10.00 | 1 290 | 370 |
| 14.00 R 24 | 10.00 | 1 340 | 370 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 2 | |||
| Commercial vehicle tyres | |||
| DIAGONAL | |||
| DIAGONAL NORMAL SECTION SIZES MOUNTED ON 5o-TAPERED OR FLAT BASE RIMS | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 7.00-16 | 5.50 | 774 | 198 |
| 7.00-20 | 5.50 | 898 | 198 |
| 7.50-16 and/or A16 or 1-16 | 6.00 | 806 | 210 |
| 7.50-17 and/or A17 or 1-17 | 6.00 | 852 | 210 |
| 7.50-20 and/or A20 or 1-20 | 6.00 | 928 | 213 |
| 8.25-16 and/or B16 or 2-16 | 6.50 | 860 | 234 |
| 8.25-17 and/or B17 or 2-17 | 6.50 | 895 | 234 |
| 8.25-20 and/or B20 or 2-20 | 6.50 | 970 | 234 |
| 9.00-16 | 6.50 | 900 | 252 |
| 9.00-20 and/or C20 or 3-20 | 7.00 | 1 012 | 256 |
| 9.00-24 and/or C24 or 3-24 | 7.00 | 1 114 | 256 |
| 10.00-20 and/or D20 or 4-20 | 7.50 | 1 050 | 275 |
| 10.00-22 and/or D22 or 4-22 | 7.50 | 1 102 | 275 |
| 11.00-20 and/or E20 or 5-20 | 8.00 | 1 080 | 291 |
| 11.00-22 and/or E22 or 5-22 | 8.00 | 1 130 | 291 |
| 11.00-24 and/or E24 or 5-24 | 8.00 | 1 180 | 291 |
| 12.00-18 | 8.50 | 1 070 | 312 |
| 12.00-20 and/or F20 or 6-20 | 8.50 | 1 120 | 312 |
| 12.00-22 and/or F22 or 6-22 | 8.50 | 1 172 | 312 |
| 12.00-24 and/or F24 or 6-24 | 8.50 | 1 220 | 312 |
| 13.00-20 | 9.00 | 1 170 | 342 |
| 14.00-20 and/or G20 or 7-20 | 10.00 | 1 238 | 375 |
| 14.00-22 and/or G22 or 7-22 | 10.00 | 1 290 | 375 |
| 14.00-24 and/or G24 or 7-24 | 10.00 | 1 340 | 375 |
| 15.00-20 | 11.25 | 1 295 | 412 |
| 16.00-20 | 13.00 | 1 370 | 446 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 3 | |||
| Commercial vehicle tyres | |||
| RADIAL NORMAL SECTION SIZES MOUNTED ON 15o-TAPERED RIMS (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 8 R 17.5 | 6.00 | 784 | 208 |
| 8.5 R 17.5 | 6.00 | 802 | 215 |
| 9 R 17.5 | 6.75 | 820 | 230 |
| 9.5 R 17.5 | 6.75 | 842 | 240 |
| 10 R 17.5 | 7.50 | 858 | 254 |
| 11 R 17.5 | 8.25 | 900 | 279 |
| 7 R 19.5 | 5.25 | 800 | 185 |
| 8 R 19.5 | 6.00 | 856 | 208 |
| 8 R 22.5 | 6.00 | 936 | 208 |
| 9 R 19.5 | 6.75 | 894 | 230 |
| 9 R 22.5 | 6.75 | 970 | 230 |
| 9.5 R 19.5 | 6.75 | 916 | 240 |
| 10 R 19.5 | 7.50 | 936 | 254 |
| 10 R 22.5 | 7.50 | 1 020 | 254 |
| 11 R 19.5 | 8.25 | 970 | 279 |
| 11 R 22.5 | 8.25 | 1 050 | 279 |
| 11 R 24.5 | 8.25 | 1 100 | 279 |
| 12 R 19.5 | 9.00 | 1 008 | 300 |
| 12 R 22.5 | 9.00 | 1 084 | 300 |
| 13 R 22.5 | 9.75 | 1 124 | 320 |
| TABLE 4 | |||
| DIAGONAL NORMAL SECTION SIZES MOUNTED ON 15o-TAPERED RIMS (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 8-19.5 | 6.00 | 856 | 208 |
| 9-19.5 | 6.75 | 894 | 230 |
| 9-22.5 | 6.75 | 970 | 230 |
| 10-22.5 | 7.50 | 1 020 | 254 |
| 11-22.5 | 8.25 | 1 054 | 279 |
| 11-24.5 | 8.25 | 1 100 | 279 |
| 12-22.5 | 9.00 | 1 084 | 300 |
Tolerance: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 5 | |||
| Commercial vehicle tyres | |||
| RADIAL ‘WIDE BASE’ SIZES MOUNTED ON 15o-TAPERED RIMS (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 14 R 19.5 | 10.50 | 962 | 349 |
| 15 R 19.5 | 11.75 | 998 | 387 |
| 15 R 22.5 | 11.75 | 1 074 | 387 |
| 16.5 R 19.5 | 13.00 | 1 046 | 425 |
| 16.5 R 22.5 | 13.00 | 1 122 | 425 |
| 18 R 19.5 | 14.00 | 1 082 | 457 |
| 18 R 22.5 | 14.00 | 1 158 | 457 |
| 19.5 R 19.5 | 15.00 | 1 134 | 495 |
| 21 R 22.5 | 16.50 | 1 246 | 540 |
| TABLE 6 | |||
| DIAGONAL ‘WIDE BASE’ SIZES MOUNTED ON 15o-TAPERED RIMS (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 15-19.5 | 11.75 | 1 004 | 387 |
| 15-22.5 | 11.75 | 1 080 | 387 |
| 16.5-19.5 | 13.00 | 1 052 | 425 |
| 16.5-22.5 | 13.00 | 1 128 | 425 |
| 18-19.5 | 14.00 | 1 080 | 457 |
| 18-22.5 | 14.00 | 1 156 | 457 |
| 19.5-19.5 | 15.00 | 1 138 | 495 |
| 21-22.5 | 16.50 | 1 246 | 540 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 7 | |||
| Commercial vehicle tyres | |||
| RADIAL ‘80’ SERIES MOUNTED ON 5o TAPERED OR FLAT-BASE RIMS | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 12/80 R 20 | 8.50 | 1 008 | 305 |
| 13/80 R 20 | 9.00 | 1 048 | 326 |
| 14/80 R 20 | 10.00 | 1 090 | 350 |
| 14/80 R 24 | 10.00 | 1 192 | 350 |
| 14.75/80 R 20 | 10.00 | 1 124 | 370 |
| 15.5/80 R 20 | 10.00 | 1 158 | 384 |
| TABLE 8 | |||
| RADIAL ‘70’ SERIES MOUNTED ON 15o TAPERED RIMS (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 9/70 R 22.5 | 6.75 | 892 | 229 |
| 10/70 R 22.5 | 7.50 | 928 | 254 |
| 11/70 R 22.5 | 8.25 | 962 | 279 |
| 12/70 R 22.5 | 9.00 | 999 | 305 |
| 13/70 R 22.5 | 9.75 | 1 033 | 330 |
| TABLE 9 | |||
| RADIAL ‘80’ SERIES MOUNTED ON 15o TAPERED RIMS (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 12/80 R 22.5 | 9.00 | 1 046 | 305 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 10 | |||
| Commercial vehicle tyres | |||
| RADIAL TYRES FOR LIGHT COMMERCIAL VEHICLES MOUNTED ON RIM OF 16″ DIAMETER AND OVER | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 6.00 R 16 C | 4.50 | 728 | 170 |
| 6.00 R 18 C | 4.00 | 782 | 165 |
| 6.50 R 16 C | 4.50 | 742 | 176 |
| 6.50 R 17 C | 4.50 | 772 | 176 |
| 6.50 R 17 LC | 4.50 | 726 | 166 |
| 6.50 R 20 C | 5.00 | 860 | 181 |
| 7.00 R 16 C | 5.50 | 778 | 198 |
| 7.50 R 16 C | 6.00 | 802 | 210 |
| 7.50 R 17 C | 6.00 | 852 | 210 |
| TABLE 11 | |||
| DIAGONAL TYRES FOR LIGHT COMMERCIAL VEHICLES MOUNTED ON RIM OF 16″ DIAMETER AND OVER | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 6.00-16 C | 4.50 | 730 | 170 |
| 6.00-18 C | 4.00 | 786 | 165 |
| 6.00-20 C | 5.00 | 842 | 172 |
| 6.50-20 C | 4.50 | 748 | 176 |
| 6.50-17 LC | 4.50 | 726 | 166 |
| 6.50-20 C | 5.00 | 870 | 181 |
| 7.00-16 C | 5.50 | 778 | 198 |
| 7.00-18 C | 5.50 | 848 | 198 |
| 7.00-20 C | 5.50 | 898 | 198 |
| 7.50-16 C | 6.00 | 806 | 210 |
| 7.50-17 C | 6.00 | 852 | 210 |
| 8.25-16 C | 6.50 | 860 | 234 |
| 8.90-16 C | 6.50 | 885 | 250 |
| 9.00-16 C | 6.50 | 900 | 252 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
TABLE 12
Commercial vehicle tyres
| RADIAL TYRES FOR LIGHT COMMERCIAL VEHICLES MOUNTED ON 5o TAPERED RIMS | |||
| Rim diameter 12″ — 15″ | |||
| (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| ‘Super balloon’ series | |||
| 5.60 R 12 C | 4.00 | 570 | 150 |
| 6.40 R 13 C | 5.00 | 648 | 172 |
| 6.70 R 13 C | 5.00 | 660 | 180 |
| 6.70 R 14 C | 5.00 | 688 | 180 |
| 6.70 R 15 C | 5.00 | 712 | 180 |
| 7.00 R 15 C | 5.50 | 744 | 195 |
| ‘Low section’ series | |||
| 6.50 R 14 C | 5.00 | 640 | 170 |
| 7.00 R 14 C | 5.00 | 650 | 180 |
| 7.50 R 14 C | 5.50 | 686 | 195 |
| TYRES FOR LIGHT COMMERCIAL VEHICLES MOUNTED ON 15o TAPERED RIMS (DROP-CENTRE) | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 7 R 17.5 C | 5.25 | 752 | 185 |
| 8 R 17.5 C | 6.00 | 784 | 208 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 13 | |||
| Commercial vehicle tyres | |||
| DIAGONAL TYRES FOR LIGHT COMMERCIAL VEHICLES MOUNTED ON 5o TAPERED RIMS (DROP CENTRE) | |||
| Rim diameter 12″ — 15″ | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| ‘Super balloon’ series | |||
| 5.20-12 C | 3.50 | 560 | 136 |
| 5.60-12 C | 4.00 | 572 | 148 |
| 5.60-13 C | 4.00 | 598 | 148 |
| 5.90-13 C | 4.50 | 616 | 158 |
| 5.90-14 C | 4.50 | 642 | 158 |
| 5.90-15 C | 4.50 | 668 | 158 |
| 6.40-13 C | 5.00 | 640 | 172 |
| 6.40-14 C | 5.00 | 666 | 172 |
| 6.40-15 C | 5.00 | 692 | 172 |
| 6.40-16 C | 4.50 | 748 | 172 |
| 6.70-13 C | 5.00 | 662 | 180 |
| 6.70-14 C | 5.00 | 688 | 180 |
| 6.70-15 C | 5.00 | 714 | 180 |
| ‘Low section’ series | |||
| 5.50-12 C | 4.00 | 552 | 142 |
| 6.00-12 C | 4.50 | 574 | 158 |
| 6.00-14 C | 4.50 | 626 | 158 |
| 6.50-14 C | 5.00 | 650 | 172 |
| 6.50-15 C | 5.00 | 676 | 172 |
| 7.00-14 C | 5.00 | 668 | 182 |
| 7.50-14 C | 5.50 | 692 | 192 |
| ‘Balloon’ series | |||
| 7.00-15 C | 5.50 | 752 | 198 |
| 7.50-15 C | 6.00 | 780 | 210 |
| ‘Millimetric’ series | |||
| 125-12 C | 3.50 | 514 | 127 |
| 165-15 C | 4.50 | 652 | 167 |
| 185-14 C | 5.50 | 654 | 188 |
| 195-14 C | 5.50 | 670 | 198 |
| 245-16 C | 7.00 | 798 | 248 |
| 17-15 C or | 5.00 | 678 | 178 |
| 17-380 C | 5.00 | 678 | 178 |
| 17-400 C | 19 × 400 mm | 702 | 186 |
| 19-400 C | 19 × 400 mm | 736 | 200 |
| 21-400 C | 19 × 400 mm | 772 | 216 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 14 | |||
| Commercial vehicle tyres | |||
| RADIAL TYRES FOR LIGHT COMMERCIAL VEHICLES MOUNTED ON 5o TAPERED RIMS (DROP-CENTRE) RIMS | |||
| ‘Millimetric’ series | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 125 R 12 C | 3.50 | 510 | 127 |
| 125 R 13 C | 3.50 | 536 | 127 |
| 125 R 14 C | 3.00 | 562 | 127 |
| 125 R 15 C | 3.50 | 588 | 127 |
| 135 R 12 C | 4.00 | 522 | 137 |
| 135 R 13 C | 4.00 | 548 | 137 |
| 135 R 14 C | 4.00 | 574 | 137 |
| 135 R 15 C | 4.00 | 600 | 137 |
| 145 R 10 C | 4.00 | 492 | 147 |
| 145 R 12 C | 4.00 | 542 | 147 |
| 145 R 13 C | 4.00 | 566 | 147 |
| 145 R 14 C | 4.00 | 590 | 147 |
| 145 R 15 C | 4.00 | 616 | 147 |
| 155 R 12 C | 4.50 | 550 | 157 |
| 155 R 13 C | 4.50 | 578 | 157 |
| 155 R 14 C | 4.50 | 604 | 157 |
| 155 R 15 C | 4.50 | 630 | 157 |
| 155 R 16 C | 4.50 | 656 | 157 |
| 165 R 13 C | 4.50 | 596 | 167 |
| 165 R 14 C | 4.50 | 622 | 167 |
| 165 R 15 C | 4.50 | 646 | 167 |
| 165 R 16 C | 4.50 | 672 | 167 |
| 175 R 13 C | 5.00 | 608 | 178 |
| 175 R 14 C | 5.00 | 634 | 178 |
| 175 R 15 C | 5.00 | 660 | 178 |
| 175 R 16 C | 5.00 | 684 | 178 |
| 185 R 13 C | 5.50 | 624 | 188 |
| 185 R 14 C | 5.50 | 650 | 188 |
| 185 R 15 C | 5.50 | 674 | 188 |
| 185 R 16 C | 5.50 | 700 | 188 |
| 195 R 14 C | 5.50 | 666 | 198 |
| 195 R 15 C | 5.50 | 690 | 198 |
| 195 R 16 C | 5.50 | 716 | 198 |
| 205 R 14 C | 6.00 | 686 | 208 |
| 205 R 15 C | 6.00 | 710 | 208 |
| 205 R 16 C | 6.00 | 736 | 208 |
| 215 R 14 C | 6.00 | 700 | 218 |
| 215 R 15 C | 6.00 | 724 | 218 |
| 215 R 16 C | 6.00 | 750 | 218 |
| 225 R 14 C | 6.50 | 714 | 228 |
| 225 R 15 C | 6.50 | 738 | 228 |
| 225 R 16 C | 6.50 | 764 | 228 |
| 235 R 14 C | 6.50 | 728 | 238 |
| 235 R 15 C | 6.50 | 752 | 238 |
| 235 R 16 C | 6.50 | 778 | 238 |
| 17 R 15 C or | 5.00 | 678 | 178 |
| 17 R 380 C | 5.00 | 678 | 178 |
| 17 R 400 C | 19 × 400 mm | 698 | 186 |
| 19 R 400 C | 19 × 400 mm | 728 | 200 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 15 | |||
| Commercial vehicle tyres | |||
| DIAGONAL WIDE-BASE TYRES FOR MULTIPURPOSE TRUCKS ON HIGHWAY, OFF-THE-ROAD AND AGRICULTURAL SERVICES | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 10.5-18 MPT | 9 | 905 | 270 |
| 10.5-20 MPT | 9 | 955 | 270 |
| 12.5-18 MPT | 11 | 990 | 325 |
| 12.5-20 MPT | 11 | 1 040 | 325 |
| 14.5-20 MPT | 11 | 1 095 | 355 |
| 14.5-24 MPT | 11 | 1 195 | 355 |
| 7.50-18 MPT | 5.50 | 885 | 208 |
| TABLE 16 | |||
| RADIAL WIDE-BASE TYRES FOR MULTIPURPOSE TRUCKS ON HIGHWAY, OFF-THE-ROAD AND AGRICULTURAL SERVICES | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 10.5 R 20 MPT | 9 | 955 | 276 |
| 12.5 R 20 MPT | 11 | 1 040 | 330 |
| 14.5 R 20 MPT | 11 | 1 095 | 362 |
| 14.5 R 24 MPT | 11 | 1 195 | 362 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 17 | |||
| Commercial vehicle tyres | |||
| RADIAL ‘FREE-ROLLING’ TYRES IN HIGHWAY SERVICE | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 5.00 R 8 | 3.00 | 467 | 132 |
| 6.00 R 9 | 4.00 | 540 | 160 |
| 7.00 R 12 | 5.00 | 672 | 192 |
| 7.50 R 15 | 6.00 | 772 | 212 |
| 8.25 R 15 | 6.50 | 836 | 234 |
| 10.00 R 15 | 7.50 | 918 | 275 |
| TABLE 18 | |||
| DIAGONAL ‘FREE-ROLLING’ TYRES IN HIGHWAY SERVICE | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 6.00-9 | 4.00 | 540 | 160 |
| 7.00-12 | 5.00 | 672 | 192 |
| 7.00-15 | 5.00 | 746 | 192 |
| 7.50-15 | 6.00 | 772 | 212 |
| 8.25-15 | 6.50 | 836 | 234 |
| 10.00-15 | 7.50 | 918 | 275 |
| 200-15 | 6.50 | 730 | 205 |
| TABLE 19 | |||
| DIAGONAL ‘75’ SERIES MOUNTED ON 15o TAPERED RIMS | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 7.25/75-16.5 or 7.25-16.5 | 5.25 | 695 | 182 |
| 8.00/75-16.5 or 8.00-16.5 | 6.00 | 724 | 203 |
| 8.75/75-16.5 or 8.75-16.5 | 6.75 | 752 | 224 |
| 9.50/75-16.5 or 9.50-16.5 | 7.50 | 781 | 245 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
TABLE 20
Commercial vehicle tyres
| DIAGONAL | |||
| DIAGONAL AND RADIAL TYRES MOUNTED ON FLAT BASE OR DIVIDED RIMS | |||
| a Also marked 18 × 7. | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 3.00-4 | 2.10 | 255 | 81 |
| 4.00-4 | 2.50 | 312 | 107 |
| 4.00-8 | 2.50 | 414 | 107 |
| 5.00-8 | 3.00 | 467 | 132 |
| 6.50-10 | 5.00 | 588 | 177 |
| 7.00-9 | 5.00 | 562 | 174 |
| 7.50-10 | 5.50 | 645 | 207 |
| 8.25-10 | 6.50 | 698 | 240 |
| 10.50-13 | 6.00 | 889 | 275 |
| 10.50-16 | 6.00 | 965 | 275 |
| 11.00-16 | 6.00 | 952 | 272 |
| 14.00-16 | 10.00 | 1 139 | 375 |
| 15 × 4.5-2 | 3.25 | 385 | 122 |
| 16 × 6-8 | 4.33 | 425 | 152 |
| 18 × 7-8a | 4.33 | 462 | 173 |
| 21 × 4 | 2.32 | 565 | 113 |
| 21 × 8-9 | 6.00 | 535 | 200 |
| 23 × 9-10 | 6.50 | 595 | 225 |
| 22 × 4.5 | 3.11 | 595 | 132 |
| 23 × 5 | 3.75 | 635 | 155 |
| 25 × 6 | 3.75 | 680 | 170 |
| 27 × 6 | 4.33 | 758 | 188 |
| 27 × 10-12 | 8.00 | 690 | 255 |
| 28 × 6 | 3.75 | 760 | 170 |
| 28 × 9-15 | 7.00 | 707 | 216 |
| (8.15-15) | 7.00 | 707 | 216 |
| 29 × 7 | 5.00 | 809 | 211 |
| 29 × 8 | 6.00 | 809 | 243 |
| 9.00-15 | 6.00 | 840 | 249 |
| 2.50-15 | 7.50 | 735 | 250 |
| 3.00-15 | 8.00 | 840 | 300 |
| RADIAL | |||
| Tyre size designation | Measuring-rim width(in inches) | Outer diameter(in mm) | Section width(in mm) |
|---|---|---|---|
| 6.50 R 10 | 5.00 | 588 | 177 |
| 7.00 R 15 | 5.50 | 746 | 197 |
| 7.50 R 10 | 5.50 | 645 | 207 |
| 15 × 4.5 R 8 | 3.25 | 385 | 122 |
| 16 × 6 R 8 | 4.33 | 425 | 152 |
| 18 × 7 R 8 | 4.33 | 462 | 173 |
| 560 × 165 R 11 | 5.00 | 560 | 175 |
| 680 × 180 R 15 | 5.00 | 680 | 189 |
Tolerances: see sections 6.1.4 and 6.1.5 of Annex II.U.K.
| TABLE 21 | |||||
| Tyres for trucks, buses, trailers and multipurpose passenger vehicles in normal highway service | |||||
| DIAGONAL AND RADIAL TYRES MOUNTED ON 5o DROP-CENTRE OR SEMI-DROP-CENTRE RIMS | |||||
| a Overall tyre widths may exceed the above section widths by 8 %. | |||||
| b Tolerance + 8 % of the difference between the above outer diameter and the nominal rim diameters. | |||||
| Tyre size designation | Measuring-rim width(in inches) | Section width(in mm)a | Outer diameter | ||
|---|---|---|---|---|---|
| Diagonal | Radial | Highway tread(in mm)b | Mud and snow(in mm)b | ||
| 6.00-16 LT | 6.00 R 16 LT | 4.50 | 173 | 732 | 743 |
| 6.50-16 LT | 6.50 R 16 LT | 4.50 | 182 | 755 | 767 |
| 6.70-15 LT | 6.70 R 15 LT | 5.00 | 191 | 722 | 733 |
| 7.00-13 LT | 7.00 R 13 LT | 5.00 | 187 | 647 | 658 |
| 7.00-14 LT | 7.00 R 14 LT | 5.00 | 187 | 670 | 681 |
| 7.00-15 LT | 7.00 R 15 LT | 5.50 | 202 | 752 | 763 |
| 7.00-16 LT | 7.00 R 16 LT | 5.50 | 202 | 778 | 788 |
| 7.10-15 LT | 7.10 R 15 LT | 5.00 | 199 | 738 | 749 |
| 7.50-15 LT | 7.50 R 15 LT | 6.00 | 220 | 782 | 794 |
| 7.50-16 LT | 7.50 R 16 LT | 6.00 | 220 | 808 | 819 |
| 8.25-16 LT | 8.25 R 16 LT | 6.50 | 241 | 859 | 869 |
| 9.00-16 LT | 9.00 R 16 LT | 6.50 | 257 | 890 | 903 |
| D78-14 LT | DR 78-14 LT | 5.00 | 192 | 661 | 672 |
| E78-14 LT | ER 78-14 LT | 5.50 | 199 | 667 | 678 |
| C78-15 LT | CR 78-15 LT | 5.00 | 187 | 672 | 683 |
| G78-15 LT | GR 78-15 LT | 6.00 | 212 | 711 | 722 |
| H78-15 LT | HR 78-15 LT | 6.00 | 222 | 727 | 739 |
| L78-15 LT | LR 78-15 LT | 6.50 | 236 | 749 | 760 |
| F78-16 LT | FR 78-16 LT | 5.50 | 202 | 721 | 732 |
| H78-16 LT | HR 78-16 LT | 6.00 | 222 | 753 | 764 |
| L78-16 LT | LR 78-16 LT | 6.50 | 236 | 775 | 786 |
TABLE 22
Tyres for trucks, buses, trailers and multipurpose passenger vehicles in normal highway service
DIAGONAL AND RADIAL TYRES MOUNTED ON 15o DROP-CENTRE RIMS
| TABLE 22.1 | |||||
| a Overall tyre widths may exceed the above section widths by 8 %. | |||||
| b Tolerance + 8 % of the difference between the above outer diameters and the nominal rim diameters. | |||||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter | ||
|---|---|---|---|---|---|
| Diagonal | Radial | Highway tread(mm)b | Mud and snow(mm)b | ||
| 7-14.5 LT | — | 6.00 | 185 | 677 | — |
| 8-14.5 LT | — | 6.00 | 203 | 707 | — |
| 9-14.5 LT | — | 7.00 | 241 | 711 | — |
| 7-17.5 LT | 7 R 17.5 LT | 5.25 | 189 | 758 | 769 |
| 8-17.5 LT | 8 R 17.5 LT | 5.25 | 199 | 788 | 799 |
| TABLE 22.2 | |||||
| a Overall tyre widths may exceed the above section widths by 7 %. | |||||
| b Tolerance + 8 % of the difference between the above outer diameter and the nominal rim diameters. | |||||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter | ||
|---|---|---|---|---|---|
| Diagonal | Radial | Highway tread(mm)b | Mud and snow(mm)b | ||
| 8.00-16.5 LT | 8.00 R 16.5 LT | 6.00 | 203 | 720 | 730 |
| 8.75-16.5 LT | 8.75 R 16.5 LT | 6.75 | 222 | 748 | 759 |
| 9.50-16.5 LT | 9.50 R 16.5 LT | 6.75 | 241 | 776 | 787 |
| 10-16.5 LT | 10 R 16.5 LT | 8.25 | 264 | 762 | 773 |
| 10-17.5 LT | 10 R 17.5 LT | 8.25 | 264 | 787 | 798 |
| 12-16.5 LT | 12 R 16.5 LT | 9.75 | 307 | 818 | 831 |
| 30 × 9.50-16.5 LT | 30 × 9.50 R 16.5 LT | 7.50 | 240 | 750 | 761 |
| 31 × 10.50-16.5 LT | 31 × 10.50 R 16.5 LT | 8.25 | 266 | 775 | 787 |
| 33 × 10.50-16.5 LT | 33 × 12.50 R 16.5 LT | 9.75 | 315 | 826 | 838 |
| 37 × 10.50-16.5 LT | 37 × 14.50 R 16.5 LT | 11.25 | 365 | 928 | 939 |
| TABLE 23 | ||||||
| Tyres for trucks, buses, trailers in normal highway service | ||||||
| DIAGONAL AND RADIAL TYRES MOUNTED ON 15o DROP-CENTRE RIMS | ||||||
| a Overall tyre widths may exceed the above section widths by 6 %. | ||||||
| b Tolerance + 5 % of the difference between the above outer diameter and the nominal rim diameters. | ||||||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter | |||
|---|---|---|---|---|---|---|
| Diagonal | Radial | Highway tread(mm)b | Heavy tread(mm)b | Mud and snow(mm)b | ||
| Normal-section tyres | ||||||
| 7-22.5 | 7 R 22.5 | 5.25 | 178 | 878 | — | 894 |
| 8-19.5 | 8 R 19.5 | 6.00 | 203 | 859 | — | 876 |
| 8-22.5 | 8 R 22.5 | 6.00 | 203 | 935 | — | 952 |
| 9-22.5 | 9 R 22.5 | 6.75 | 229 | 974 | 982 | 992 |
| 10-22.5 | 10 R 22.5 | 7.50 | 254 | 1 019 | 1 031 | 1 038 |
| 11-22.5 | 11 R 22.5 | 8.25 | 279 | 1 054 | 1 067 | 1 037 |
| 11-24.5 | 11 R 24.5 | 8.25 | 279 | 1 104 | 1 118 | 1 123 |
| 12-22.5 | 12 R 22.5 | 9.00 | 300 | 1 085 | 1 099 | 1 104 |
| 12-24.5 | 12 R 24.5 | 9.00 | 300 | 1 135 | 1 150 | 1 155 |
| 12.5-22.5 | 12.5 R 22.5 | 9.00 | 302 | 1 085 | 1 099 | 1 104 |
| 12.5-22.5 | 12.5 R 24.5 | 9.00 | 302 | 1 135 | 1 150 | 1 155 |
| Wide-base tyres | ||||||
| 14-17.5 | 14 R 17.5 | 10.50 | 349 | 907 | — | 921 |
| 15-19.5 | 15 R 19.5 | 11.75 | 389 | 1 005 | — | 1 019 |
| 15-22.5 | 15 R 22.5 | 11.75 | 389 | 1 082 | — | 1 095 |
| 16.5-19.5 | 16.5 R 19.5 | 13.00 | 425 | 1 052 | — | 1 068 |
| 16.5-22.5 | 16.5 R 22.5 | 13.00 | 425 | 1 128 | — | 1 144 |
| 18-19.5 | 18 R 19.5 | 14.00 | 457 | 1 080 | — | 1 096 |
| 18-22.5 | 18 R 22.5 | 14.00 | 457 | 1 158 | — | 1 172 |
| 19.5-19.5 | 19.5 R 19.5 | 15.00 | 495 | 1 138 | — | 1 156 |
| TABLE 24 | ||||||
| Tyres for trucks, buses, trailers in normal highway service | ||||||
| DIAGONAL AND RADIAL TYRES MOUNTED ON 5o DROP-CENTRE RIMS | ||||||
| a Overall tyre widths may exceed the above section widths by 6 %. | ||||||
| b Tolerance + 6 % of the difference between the above outer diameter and the nominal rim diameters. | ||||||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter | |||
|---|---|---|---|---|---|---|
| Diagonal | Radial | Highway tread(mm)b | Heavy tread(mm)b | Mud and snow(mm)b | ||
| — | 8R14LT | 7.00 | 216 | 667 | — | — |
| 9-15LT | — | 8.00 | 254 | 744 | 755 | — |
| 10-15LT | 10R15LT | 8.00 | 264 | 773 | 783 | — |
| 10-16LT | — | 8.00 | 264 | 798 | 809 | — |
| 11-14LT | — | 8.00 | 279 | 752 | 763 | — |
| 11-15LT | 11R15LT | 8.00 | 279 | 777 | 788 | — |
| 11-16LT | — | 8.00 | 279 | 803 | 813 | — |
| 12-15LT | — | 10.00 | 318 | 823 | 834 | — |
| — | 9R15LT | 8.00 | 254 | 744 | 755 | 752 |
| 24 × 7.50-13LT | 24 × 7.50R13LT | 6.00 | 191 | 597 | 609 | 604 |
| 27 × 8.50-14LT | 27 × 8.50-14LT | 7.00 | 218 | 674 | 685 | 680 |
| 28 × 8.50-15LT | 28 × 8.50-15LT | 7.00 | 218 | 699 | 711 | 705 |
| 29 × 9.50-15LT | 29 × 9.50-15LT | 7.50 | 240 | 724 | 736 | 731 |
| 30 × 9.50-15LT | 30 × 9.50-15LT | 7.50 | 240 | 750 | 761 | 756 |
| 31 × 10.50-15LT | 31 × 10.50-15LT | 8.50 | 268 | 775 | 787 | 781 |
| 31 × 11.50-15LT | 31 × 11.50-15LT | 9.00 | 290 | 775 | 787 | 781 |
| 32 × 11.50-15LT | 32 × 11.50-15LT | 9.00 | 290 | 801 | 812 | 807 |
| 33 × 12.50-15LT | 33 × 12.50-15LT | 10.00 | 318 | 826 | 838 | 832 |
| 35 × 12.50-15LT | 35 × 12.50-15LT | 10.00 | 318 | 877 | 888 | 883 |
| 37 × 12.50-15LT | 37 × 12.50-15LT | 10.00 | 318 | 928 | 939 | 934 |
| 31 × 13.50-15LT | 31 × 13.50-15LT | 11.00 | 345 | 775 | 787 | 781 |
| 37 × 14.50-15LT | 37 × 14.50-15LT | 12.00 | 372 | 928 | 939 | 934 |
| 31 × 15.50-15LT | 31 × 15.50-15LT | 12.00 | 390 | 775 | 787 | 781 |
| TABLE 25 | ||||||
| Tyres for trucks, buses and trailers in normal highway service | ||||||
| DIAGONAL AND RADIAL TYRES MOUNTED ON MULTI-PIECE BYMS | ||||||
| a Overall tyre widths may exceed the above section widths by 6 %. | ||||||
| b Tolerance + 6 % of the difference between the above outer diameter and the nominal rim diameters. | ||||||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter | |||
|---|---|---|---|---|---|---|
| Diagonal | Radhal | Highway tread(mm)b | Heavy tread(mm)b | Mud and snow(mm)b | ||
| 6.50-20 | 6.50R20 | 5.00 | 184 | 878 | — | 1 049 |
| 7.00-15TR | 7.00R15TR | 5.50 | 199 | 777 | — | 962 |
| 7.00-17 | 7.00R17 | 5.50 | 199 | 828 | — | 843 |
| 7.00-18 | 7.00R18 | 5.50 | 199 | 853 | — | 868 |
| 7.00-20 | 7.00R20 | 5.50 | 199 | 904 | — | 919 |
| 7.50-15TR | 7.50R15TR | 6.00 | 215 | 808 | — | 825 |
| 7.50-17 | 7.50R17 | 6.00 | 215 | 859 | — | 876 |
| 7.50-18 | 7.50R18 | 6.00 | 215 | 884 | — | 981 |
| 7.50-20 | 7.50R20 | 6.00 | 215 | 935 | — | 952 |
| 8.25-15TR | 8.25R15TR | 6.50 | 236 | 847 | 855 | 865 |
| 8.25-17 | 8.25R17 | 6.50 | 236 | 898 | 906 | 915 |
| 8.25-20 | 8.25R20 | 6.50 | 236 | 974 | 982 | 992 |
| 9.00-15TR | 9.00R15TR | 7.00 | 259 | 891 | 904 | 911 |
| 9.00-20 | 9.00R20 | 7.00 | 259 | 1 019 | 1 031 | 1 038 |
| 10.00-15TR | 10.00R15TR | 7.50 | 278 | 927 | 940 | 946 |
| 10.00-20 | 10.00R20 | 7.50 | 278 | 1 054 | 1 067 | 1 073 |
| 10.00-22 | 10.50R22 | 7.50 | 278 | 1 104 | 1 118 | 1 123 |
| 11.00-15TR | 11.00R15TR | 8.00 | 293 | 958 | 972 | 977 |
| 11.00-20 | 11.00R20 | 8.00 | 293 | 1 085 | 1 099 | 1 104 |
| 11.00-22 | 11.00R22 | 8.00 | 293 | 1 135 | 1 150 | 1 155 |
| 11.00-24 | 11.00R24 | 8.00 | 293 | 1 186 | 1 201 | 1 206 |
| 11.50-20 | 11.50R20 | 8.00 | 296 | 1 085 | 1 099 | 1 104 |
| 11.50-22 | 11.50R22 | 8.00 | 296 | 1 135 | 1 150 | 1 155 |
| 12.50-20 | 12.00R20 | 8.50 | 315 | 1 125 | — | 1 146 |
| 12.50-24 | 12.00R24 | 8.50 | 315 | 1 226 | — | 1 247 |
| TABLE 26 | |||||
| Tyres for trucks and trailers in highway service at restricted speeds | |||||
| DIAGONAL AND RADIAL TYRES MOUNTED ON MULTI-PIECE RIMS | |||||
| a Overall tyre widths may exceed the above section widths by 6 %. | |||||
| b Tolerance + 6 % of the difference between the above outer diameter and the nominal rim diameters. | |||||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter | ||
|---|---|---|---|---|---|
| Diagonal | Radial | Highway tread(mm)b | Mud and snow(mm)b | ||
| 13.00-20 | 13.00R20 | 9.00 | 340 | 1 177 | 1 200 |
| 14.00-20 | 14.00R20 | 10.00 | 375 | 1 241 | 1 266 |
| 14.00-24 | 14.00R24 | 10.00 | 375 | 1 343 | 1 368 |
| TABLE 27 | |||
| Tyres for mobile homes in highway service | |||
| DIAGONAL | |||
| a Overall tyre widths may exceed the above section widths by 8 %. | |||
| b Tolerance + 8 % of the difference between the above outer diameter and the nominal rim diameters. | |||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter(mm)b |
|---|---|---|---|
| Tyres mounted on 15o drop-centre rims | |||
| 7-14.5 MH | 6.00 | 185 | 677 |
| 8-14.5 MH | 6.00 | 203 | 707 |
| 9-14.5 MH | 7.00 | 241 | 711 |
| Tyres mounted on 5o drop-centre and semi-drop-centre rims | |||
| 7.00-15 MH | 5.50 | 202 | 752 |
| TABLE 28 | ||||
| Mining and logging tyres in intermittent highway service | ||||
| DIAGONAL | ||||
| a Overall tyre widths may exceed the above section widths by 8 %. | ||||
| b Tolerance + 6 % of the difference between the above outer diameter and the nominal rim diameters. | ||||
| Tyre size designation | Measuring-rim width(inches) | Section width(mm)a | Outer diameter | |
|---|---|---|---|---|
| Traction tread(mm)b | Extra tread(mm)b | |||
| Tyres mounted on 15o drop-centre rims | ||||
| 7.00-20 ML | 5.50 | 199 | 919 | — |
| 7.50-20 ML | 6.00 | 215 | 952 | — |
| 8.25-20 ML | 6.50 | 236 | 992 | — |
| 9.00-20 ML | 7.00 | 259 | 1 038 | 1 063 |
| 10.00-20 ML | 7.50 | 278 | 1 073 | 1 099 |
| 10.00-22 ML | 7.50 | 278 | 1 123 | 1 150 |
| 10.00-20 ML | 7.50 | 278 | 1 174 | 1 200 |
| 11.00-20 ML | 8.00 | 293 | 1 104 | 1 131 |
| 11.00-22 ML | 8.00 | 293 | 1 155 | 1 182 |
| 11.00-24 ML | 8.00 | 293 | 1 206 | 1 233 |
| 12.00-20 ML | 8.50 | 315 | 1 146 | 1 173 |
| 12.00-24 ML | 8.50 | 315 | 1 247 | 1 275 |
| 13.00-20 ML | 9.00 | 340 | 1 200 | — |
| 13.00-24 ML | 9.00 | 340 | 1 302 | — |
| 14.00-20 ML | 10.00 | 375 | 1 266 | — |
| 14.00-24 ML | 10.00 | 375 | 1 368 | — |
| Tyres mounted on full-tapered bead seat rims | ||||
| 11.00-25 ML | 8.50 | 298 | 1 206 | 1 233 |
| 12.00-21 ML | 8.50 | 315 | 1 146 | 1 175 |
| 12.00-25 ML | 8.50 | 315 | 1 247 | 1 275 |
| 13.00-25 ML | 10.00 | 351 | 1 302 | — |
| 14.00-21 ML | 10.00 | 375 | 1 266 | — |
| 14.00-25 ML | 10.00 | 375 | 1 368 | — |
| Tyres mounted on 15o drop-centre rims | ||||
| 9-22.5 ML | 6.75 | 229 | 992 | — |
| 10-22.5 ML | 7.50 | 254 | 1 038 | — |
| 11-22.5 ML | 8.25 | 279 | 1 073 | — |
| 11-24.5 ML | 8.25 | 279 | 1 123 | — |
| 12-22.5 ML | 9.00 | 300 | 1 104 | — |
| Tyres mounted on 15o drop-centre rims | ||||
| 14-17.5 ML | 10.50 | 349 | 921 | — |
| 15-19.5 ML | 11.75 | 389 | 1 019 | — |
| 15-22.5 ML | 11.75 | 389 | 1 095 | — |
| 16.5-19.5 ML | 13.00 | 425 | 1 068 | — |
| 16.5-22.5 ML | 13.00 | 425 | 1 144 | — |
| 18-19.5 ML | 14.00 | 457 | 1 096 | — |
| 18-22.5 ML | 14.00 | 457 | 1 172 | — |
| 19.5-19.5 ML | 15.00 | 495 | 1 156 | — |
| 23-23.5 ML | 17.00 | 584 | 1 320 | — |
Options/Help
Print Options
PrintThe Whole Directive
PrintThe Whole Annex
PrintThis Part only
You have chosen to open the Whole Directive
The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
You have chosen to open Schedules only
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the EU Official Journal
- lists of changes made by and/or affecting this legislation item
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as adopted version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.