Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft (repealed)
Print Options
PrintThe Whole
Directive
PrintThis
Annex
only
Changes over time for: ANNEX V
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Version Superseded: 17/01/2016
Status:
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
ANNEX VU.K.INTERNAL PRODUCTION CONTROL(module A)
1.The manufacturer or his authorized representative established within the Community, who carries out the obligations laid down in point 2, ensures and declares that the products concerned satisfy the requirements of the Directive that apply to them. The manufacturer or his authorized representative established within the Community shall affix the CE marking to each product and draw up a written declaration of conformity (see Annex XV).U.K.
2.The manufacturer shall establish the technical documentation described in paragraph 3 and he or his authorized representative established within the Community shall keep it for a period ending at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities for inspection purposes.U.K.
Where neither the manufacturer nor his authorized representative is established within the Community, the obligation to keep the technical documentation available shall be the responsibility of the person who places the product on the Community market.
3.Technical documentation shall enable the conformity of the products with the requirements of the Directive to be assessed. It shall, as far as relevant for such assessment, cover the design, manufacture and operation of the product (see Annex XIII).U.K.
4.The manufacturer or his authorized representative shall keep a copy of the declaration of conformity with the technical documentation.U.K.
5.The manufacturer shall take all measures necessary in order that the manufacturing process shall ensure compliance of the manufactured products with the technical documentation referred to in point 2 and with the requirements of the Directive that apply to them.U.K.
Back to top