Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft (repealed)
Print Options
PrintThe Whole
Directive
PrintThis
Annex
only
Status:
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
ANNEX XIU.K.UNIT VERIFICATION(module G)
1.This module describes the procedure whereby the manufacturer ensures and declares that the product concerned, which has been issued with the certificate referred to in point 2, conforms to the requirements of the Directive that apply to it. The manufacturer or his authorized representative established within the Community shall affix the CE marking to the product and draw up a declaration of conformity (see Annex XV).U.K.
2.The notified body shall examine the individual product and carry out the appropriate tests as set out in the relevant standard(s) referred to in Article 5, or equivalent tests, to ensure its conformity with the relevant requirements of the Directive.U.K.
The notified body shall affix, or cause to be affixed, its distinguishing number on the approved product and shall draw up a certificate of conformity concerning the tests carried out.
3.The aim of the technical documentation is to enable conformity with the requirements of the Directive to be assessed and the design, manufacture and operation of the product to be understood (see Annex XIII).U.K.
Back to top