Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft (repealed)
Print Options
PrintThe Whole
Directive
PrintThis
Annex
only
Changes over time for:
ANNEX XIII
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Version Superseded: 01/01/2013
Status:
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
[ANNEX XIII U.K. TECHNICAL DOCUMENTATION SUPPLIED BY THE MANUFACTURER
The technical documentation referred to in Annexes V, VII, VIII, IX, XI and XVI must comprise all relevant data or means used by the manufacturer to ensure that components or craft comply with the essential requirements relating to them.
The technical documentation shall enable understanding of the design, manufacture and operation of the product, and shall enable assessment of conformity with the requirements of this Directive.
The documentation shall contain so far as relevant for assessment:
(a)
a general description of the type,
(b)
conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,
(c)
descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,
(d)
a list of the standards referred to in Article 5, applied in full or in part, and descriptions of the solutions adopted to fulfil the essential requirements when the standards referred to in Article 5 have not been applied,
(e)
results of design calculations made, examinations carried out, etc.,
(f)
test reports, or calculations namely on stability according to section 3.2 of the Essential Requirements and on buoyancy according to section 3.3 thereof (Annex I.A),
(g)
exhaust emissions test reports demonstrating compliance with section 2 of the Essential Requirements (Annex I.B),
(h)
sound emissions test reports or reference boat data demonstrating compliance with section 1 of the Essential Requirements (Annex I.C).]
Back to top