ANNEX IU.K.Minimum technical requirements for treatment in accordance with Article 6(1) and (3)
1.Sites for storage (including temporary storage) of end-of-life vehicles prior to their treatament:U.K.
impermeable surfaces for appropriate areas with the provision of spillage collection facilities, decanters and cleanser-degeasers,
equipment for the treatment of water, including rainwater, in compliance with health and environmental regulations.
2.Sites for treatment:U.K.
impermeable surfaces for appropriate areas with the provision of spillage collection facilities, decanters and cleanser-degreasers,
appropriate storage for dismantled spare parts, including impermeable storage for oil-contaminated spare parts,
appropriate containers for storage of batteries (with electrolyte neutralisation on site or elsewhere), filters and PCB/PCT-containing condensers,
appropriate storage tanks for the segregated storage of end-of-life vehicle fluids: fuel, motor oil, gearbox oil, transmission oil, hydraulic oil, cooling liquids, antifreeze, brake fluids, battery acids, air-conditioning system fluids and any other fluid contained in the end-of-life vehicle,
equipment for the treatment of water, including rainwater, in compliance with health and environmental regulations,
appropriate storage for used tyres, including the prevention of fire hazards and excessive stockpiling.
3.Treatment operations for depollution of end-of-life vehicles:U.K.
removal of batteries and liquified gas tanks,
removal or neutralisation of potential explosive components, (e.g. air bags),
removal and separate collection and storage of fuel, motor oil, transmission oil, gearbox oil, hydraulic oil, cooling liquids, antifreeze, brake fluids, air-conditioning system fluids and any other fluid contained in the end-of-life vehicle, unless they are necessary for the re-use of the parts concerned,
removal, as far as feasible, of all components identified as containing mercury.
4.Treatment operations in order to promote recycling:U.K.
removal or catalysts,
removal of metal components containing copper, aluminium and magnesium if these metals are not segregated in the shredding process,
removal of tyres and large plastic components (bumpers, dashboard, fluid containers, etc), if these materials are not segregated in the shredding process in such a way that they can be effectively recycled as materials,
removal of glass.
5.Storage operations are to be carried out avoiding damage to components containing fluids or to recoverable components and spare parts.U.K.
[F1ANNEX II U.K.
Textual Amendments
Materials and components exempt from Article 4(2)(a)
a By 1 January 2005 the Commission shall assess whether the phase-out time scheduled for this entry has to be reviewed in relation to the availability of substitutes for lead, taking into account the objectives of Article 4(2)(a). | ||
b See footnote 1. | ||
c By 1 January 2005 , the Commission shall assess this exemption in relation to road safety aspects. | ||
d See footnote 1. | ||
e Dismantling if, in correlation with entry 14, an average threshold of 60 grams per vehicle is exceeded. For the application of this clause, electronic devices not installed by the manufacturer on the production line shall not be taken into account. | ||
f Dismantling if, in correlation with entry 11, an average threshold of 60 grams per vehicle is exceeded. For the application of this clause, electronic devices not installed by the manufacturer on the production line shall not be taken into account. | ||
Materials and components | Scope and expiry date of the exemption | To be labelled or made identifiable in accordance with Article 4(2)(b)(iv) |
---|---|---|
Lead as an alloying element | ||
1. Steel for machining purposes and galvanised steel containing up to 0,35 % lead by weight | ||
2. a) Aluminium for machining purposes with a lead content up to 2 % by weight | 1 July 2005 a | |
b) Aluminium for machining purposes with a lead content up to 1 % by weight | 1 July 2008 b | |
3. Copper alloy containing up to 4 % lead by weight | ||
4. Lead-bronze bearing shells and bushes | ||
Lead and lead compounds in components | ||
5. Batteries | X | |
6. Vibration dampers | X | |
7. Wheel balance weights | Vehicles type-approved before 1 July 2003 and wheel balance weights intended for servicing of these vehicles: 1 July 2005 c | X |
8. Vulcanising agents and stabilisers for elastomers in fluid handling and powertrain applications | 1 July 2005 d | |
9. Stabiliser in protective paints | 1 July 2005 | |
10. Carbon brushes for electric motors | Vehicles type-approved before 1 July 2003 and carbon brushes for electric motors intended for servicing of these vehicles: 1 January 2005 | |
11. Solder in electronic circuit boards and other electric applications | X e | |
12. Copper in brake linings containing more than 0,5 % lead by weight | Vehicles type-approved before 1 July 2003 and servicing on these vehicles: 1 July 2004 | X |
13. Valve seats | Engine types developed before 1 July 2003 : 1 July 2006 | |
14. Electrical components which contain lead in a glass or ceramic matrix compound except glass in bulbs and glaze of spark plugs | X f (for components other than piezo in engines) | |
15. Glass in bulbs and glaze of spark plugs | 1 January 2005 | |
16. Pyrotechnic initiators | 1 July 2007 | |
Hexavalent chromium | ||
17. Corrosion preventive coatings | 1 July 2007 | |
18. Absorption refrigerators in motorcaravans | X | |
Mercury | ||
19. Discharge lamps and instrument panel displays | X | |
Cadmium | ||
20. Thick film pastes | 1 July 2006 | |
21. Batteries for electrical vehicles | After 31 December 2005 , the placing on the market of NiCd batteries shall only be allowed as replacement parts for vehicles put on the market before this date. | X |
Notes: U.K.
a maximum concentration value up to 0,1 % by weight and per homogeneous material, for lead, hexavalent chromium and mercury and up to 0,01 % by weight per homogeneous material for cadmium shall be tolerated, provided these substances are not intentionally introduced (1) ,
a maximum concentration value up to 0,4 % by weight of lead in aluminium shall also be tolerated provided it is not intentionally introduced (2) ,
a maximum concentration value up to 0,4 % by weight of lead in copper intended for friction materials in brake linings shall be tolerated until 1 July 2007 provided it is not intentionally introduced (3) ,
the reuse of parts of vehicles which were already on the market at the date of expiry of an exemption is allowed without limitation since it is not covered by Article 4(2)(a),
[F2spare parts put on the market after 1 July 2003 which are used for vehicles put on the market before 1 July 2003 are exempted from the provisions of Article 4(2)(a) (4) .] ]
[F1‘ Intentionally introduced ’ shall mean ‘ deliberately utilised in the formulation of a material or component where its continued presence is desired in the final product to provide a specific characteristic, appearance or quality ’ . The use of recycled materials as feedstock for the manufacture of new products, where some portion of the recycled materials may contain amounts of regulated metals, is not to be considered as intentionally introduced.]
[F1See footnote 1.]
[F1See footnote 1.]