Council Directive 2001/111/ECShow full title

Council Directive 2001/111/EC of 20 December 2001 relating to certain sugars intended for human consumption

ANNEXU.K.

A.PRODUCT NAMES AND DEFINITIONSU.K.

1.Semi-white sugarU.K.

Purified and crystallised sucrose of sound and fair marketable quality with the following characteristics:

(a) polarisationnt less than 99,5 °Z
(b) invert sugar contentnot more than 0,1 % by weight
(c) loss on dryingnot more than 0,1 % by weight.

2.Sugar or white sugarU.K.

Purified and crystallised sucrose of sound and fair marketable quality with the following characteristics:

(a) polarisationnot less than 99,7 °Z
(b) invert sugar contentnot more than 0,04 % by weight
(c) loss on dryingnot more than 0,06 % by weight
(d) type of colournot more than nine points determined in accordance with point (a) of Part B.

3.Extra-white sugarU.K.

The product having the characteristics referred to in point 2(a), (b) and (c) and in respect of which the total number of points determined according to the provisions of Part B does not exceed eight, and not more than:

  • four for the colour type,

  • six for the ash content,

  • three for the colour in solution.

4.Sugar solution(1) U.K.

The aqueous solution of sucrose with the following characteristics:

(a) dry matternot less than 62 % by weight
(b) invert sugar content (ratio of fructose to dextrose: 1,0 ± 0,2)not more than 3 % by weight of dry matter
(c) conductivity ashnot more than 0,1 % by weight of dry matter, determined in accordance with point (b) of Part B
(d) colour in solutionnot more than 45 ICUMSA units.

5.Invert sugar solution(2) U.K.

The aqueous solution of sucrose partially inverted by hydrolysis, in which the proportion of invert sugar does not predominate, with the following characteristics:

(a) dry matternot less than 62 % by weight
(b) invert sugar content ratio of fructose to dextrose (1,0 ± 0,1)more than 3 % but not more than 50 % by weight of dry matter
(c) conductivity ashnot more than 0,4 % by weight of dry matter, determined in accordance with point (b) of Part B.

6.Invert sugar syrup(3) U.K.

The aqueous solution, which has possibly been crystallised, of sucrose that has been partly inverted via hydrolysis, in which the invert sugar content (fructose/dextrose quotient 1,0 ± 0,1), must exceed 50 % by weight of dry matter, but which must otherwise meet the requirements laid down in point 5(a) and (c).

7.Glucose syrupU.K.

The purified and concentrated aqueous solution of nutritive saccharides obtained from starch and/or inulin, with the following characteristics:

(a) dry matternot less than 70 % by weight
(b) dextrose equivalentnot less than 20 % by weight of dry matter and expressed as D-glucose
(c) sulphated ashnot more than 1 % by weight of dry matter.

8.Dried glucose syrupU.K.

Partially dried glucose syrup with at least 93 % by weight of dry matter, but which must otherwise meet the requirements laid down in point 7(b) and (c).

9.Dextrose or dextrose monohydrateU.K.

Purified and crystallised D-glucose containing one molecule of water of crystallisation, with the following characteristics:

(a) dextrose (D-glucose)not less than 99,5 % by weight of dry matter
(b) dry matternot less than 90 % by weight
(c) sulphated ashnot more than 0,25 % by weight of dry matter.

10.Dextrose or dextrose anhydrousU.K.

Purified and crystallised D-glucose not containing water of crystallisation, with at least 98 % by weight of dry matter, but which must otherwise meet the requirements laid down in point 9(a) and (c).

11.FructoseU.K.

Purified crystallised D-fructose with the following characteristics:

fructose content98 % minimum
glucose content0,5 % maximum
loss on dryingnot more than 0,5 % by weight
conductivity ashnot more than 0,1 % by weight determined in accordance with point (b) of Part B.

B.METHOD OF DETERMINING THE COLOUR TYPE, CONDUCTIVITY ASH CONTENT AND THE COLOUR IN SOLUTION OF SUGAR (WHITE) AND OF EXTRA-WHITE SUGAR DEFINED IN POINTS 2 AND 3 OF PART AU.K.

‘Point’ corresponds:

(a)

in the case of the colour type, to 0,5 units, calculated by the method of the Brunswick Institute for Agricultural and Sugar Industry Technology, as set out in Chapter A, paragraph 2, of the Annex to Commission Regulation (EEC) No 1265/69 of 1 July 1969 establishing methods for determining the quality of sugar bought in by intervention agencies(4);

(b)

in the case of ash content, to 0,0018 % calculated by the method of the International Commission for Uniform Methods of Sugar Analysis (ICUMSA) as set out in Chapter A, paragraph 1, of the Annex to Regulation (EEC) No 1265/69;

(c)

in the case of the colour in solution, to 7,5 units calculated by the ICUMSA method as set out in Chapter A, paragraph 3, of the Annex to Regulation (EEC) No 1265/69.

(1)

The description ‘white’ is reserved for:

(a)

sugar solution where the colour in solution does not exceed 25 ICUMSA units determined in accordance with the method specified in point (c) of Part B;

(b)

invert sugar solution and invert sugar syrup of which:

  • the conductivity ash content does not exceed 0,1 %,

  • the colour in solution does not exceed 25 ICUMSA units determined in accordance with the method specified in point (c) of Part B.

(2)

The description ‘white’ is reserved for:

(a)

sugar solution where the colour in solution does not exceed 25 ICUMSA units determined in accordance with the method specified in point (c) of Part B;

(b)

invert sugar solution and invert sugar syrup of which:

  • the conductivity ash content does not exceed 0,1 %,

  • the colour in solution does not exceed 25 ICUMSA units determined in accordance with the method specified in point (c) of Part B.

(3)

The description ‘white’ is reserved for:

(a)

sugar solution where the colour in solution does not exceed 25 ICUMSA units determined in accordance with the method specified in point (c) of Part B;

(b)

invert sugar solution and invert sugar syrup of which:

  • the conductivity ash content does not exceed 0,1 %,

  • the colour in solution does not exceed 25 ICUMSA units determined in accordance with the method specified in point (c) of Part B.