- Latest available (Revised)
- Point in Time (26/01/2007)
- Original (As adopted by EU)
Directive 2001/83/EC of the European Parliament and of the Council of 6 November 2001 on the Community code relating to medicinal products for human use
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 21/03/2008
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
[F11. The competent authority of the Member State concerned shall ensure, by means of repeated inspections, and if necessary unannounced inspections, and, where appropriate, by asking an Official Medicines Control Laboratory or a laboratory designated for that purpose to carry out tests on samples, that the legal requirements governing medicinal products are complied with.
The competent authority may also carry out unannounced inspections at the premises of manufacturers of active substances used as starting materials, or at the premises of marketing authorisation holders whenever it considers that there are grounds for suspecting non-compliance with the principles and guidelines of good manufacturing practice referred to in Article 47. These inspections may also be carried out at the request of a Member State, the Commission or the Agency.
In order to verify whether the data submitted in order to obtain a conformity certificate comply with the monographs of the European Pharmacopoeia, the standardisation body of the nomenclatures and the quality norms within the meaning of the Convention relating to the elaboration of the European Pharmacopoeia (1) (European Directorate for the quality of Medicinal Products) may ask the Commission or the Agency to request such an inspection when the starting material concerned is the subject of a European Pharmacopoeia monograph.
The competent authority of the Member State concerned may carry out inspections of starting material manufacturers at the specific request of the manufacturer himself.
Such inspections shall be carried out by officials representing the competent authority who shall be empowered to:
(a) inspect the manufacturing or commercial establishments of manufacturers of medicinal products or of active substances used as starting materials, and any laboratories employed by the holder of the manufacturing authorisation to carry out checks pursuant to Article 20;
(b) take samples including with a view to independent tests being carried out by an Official Medicines Control Laboratory or a laboratory designated for that purpose by a Member State;
(c) examine any documents relating to the object of the inspection, subject to the provisions in force in the Member States on 21 May 1975 placing restrictions on these powers with regard to the description of the manufacturing method;
(d) inspect the premises, records and documents of marketing authorisation holders or any firms employed by the marketing authorisation holder to perform the activities described in Title IX, and in particular Articles 103 and 104.]
2.Member States shall take all appropriate steps to ensure that the manufacturing processes used in the manufacture of immunological products are properly validated and attain batch-to-batch consistency.
[F13. After every inspection as referred to in paragraph 1, the officials representing the competent authority shall report on whether the manufacturer complies with the principles and guidelines of good manufacturing practice laid down in Article 47 or, where appropriate, with the requirements laid down in Articles 101 to 108. The content of such reports shall be communicated to the manufacturer or marketing authorisation holder who has undergone the inspection.]
[F24. Without prejudice to any arrangements which may have been concluded between the Community and third countries, a Member State, the Commission or the Agency may require a manufacturer established in a third country to submit to an inspection as referred to in paragraph 1.
5. Within 90 days of an inspection as referred to in paragraph 1, a certificate of good manufacturing practice shall be issued to a manufacturer if the outcome of the inspection shows that the manufacturer complies with the principles and guidelines of good manufacturing practice as provided for by Community legislation.
If inspections are performed as part of the certification procedure for the monographs of the European Pharmacopoeia, a certificate shall be drawn up.
6. Member States shall enter the certificates of good manufacturing practice which they issue in a Community database managed by the Agency on behalf of the Community.
7. If the outcome of the inspection as referred to in paragraph 1 is that the manufacturer does not comply with the principles and guidelines of good manufacturing practice as provided for by Community legislation, the information shall be entered in the Community database as referred to in paragraph 6.]
The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: