- Latest available (Revised)
- Point in Time (13/11/2004)
- Original (As adopted by EU)
Directive 2003/87/EC of the European Parliament and of the Council of 13 October 2003 establishing a scheme for greenhouse gas emission allowance trading within the Community and amending Council Directive 96/61/EC (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Carbon dioxide (CO2)
Methane (CH4)
Nitrous Oxide (N2O)
Hydrofluorocarbons (HFCs)
Perfluorocarbons (PFCs)
Sulphur Hexafluoride (SF6)
Textual Amendments
F1 Inserted by Directive 2004/101/EC of the European Parliament and of the Council of 27 October 2004 amending Directive 2003/87/EC establishing a scheme for greenhouse gas emission allowance trading within the Community, in respect of the Kyoto Protocol's project mechanisms (Text with EEA relevance).
Emissions shall be monitored either by calculation or on the basis of measurement.
Calculations of emissions shall be performed using the formula:
Activity data × Emission factor × Oxidation factor
Activity data (fuel used, production rate etc.) shall be monitored on the basis of supply data or measurement.
Accepted emission factors shall be used. Activity-specific emission factors are acceptable for all fuels. Default factors are acceptable for all fuels except non-commercial ones (waste fuels such as tyres and industrial process gases). Seam-specific defaults for coal, and EU-specific or producer country-specific defaults for natural gas shall be further elaborated. IPCC default values are acceptable for refinery products. The emission factor for biomass shall be zero.
If the emission factor does not take account of the fact that some of the carbon is not oxidised, then an additional oxidation factor shall be used. If activity-specific emission factors have been calculated and already take oxidation into account, then an oxidation factor need not be applied.
Default oxidation factors developed pursuant to Directive 96/61/EC shall be used, unless the operator can demonstrate that activity-specific factors are more accurate.
A separate calculation shall be made for each activity, installation and for each fuel.
Measurement of emissions shall use standardised or accepted methods, and shall be corroborated by a supporting calculation of emissions.
Standardised or accepted methods shall be used, developed by the Commission in collaboration with all relevant stakeholders and adopted in accordance with the procedure referred to in Article 23(2).
Each operator shall include the following information in the report for an installation:
Data identifying the installation, including:
Name of the installation;
Its address, including postcode and country;
Type and number of Annex I activities carried out in the installation;
Address, telephone, fax and email details for a contact person; and
Name of the owner of the installation, and of any parent company.
For each Annex I activity carried out on the site for which emissions are calculated:
Activity data;
Emission factors;
Oxidation factors;
Total emissions; and
Uncertainty.
For each Annex I activity carried out on the site for which emissions are measured:
Total emissions;
Information on the reliability of measurement methods; and
Uncertainty.
For emissions from combustion, the report shall also include the oxidation factor, unless oxidation has already been taken into account in the development of an activity-specific emission factor.
Member States shall take measures to coordinate reporting requirements with any existing reporting requirements in order to minimise the reporting burden on businesses.
the reported activity data and related measurements and calculations;
the choice and the employment of emission factors;
the calculations leading to the determination of the overall emissions; and
if measurement is used, the appropriateness of the choice and the employment of measuring methods.
the reported data is free of inconsistencies;
the collection of the data has been carried out in accordance with the applicable scientific standards; and
the relevant records of the installation are complete and consistent.
the provisions of this Directive, as well as relevant standards and guidance adopted by the Commission pursuant to Article 14(1);
the legislative, regulatory, and administrative requirements relevant to the activities being verified; and
the generation of all information related to each source of emissions in the installation, in particular, relating to the collection, measurement, calculation and reporting of data.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: