‘1.1.Whether or not listed among the CN codes in Annex V, Part B, wood of conifers (Coniferales), except that of Thuja L., other than in the form of: chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,
wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
wood used to wedge or support non-wood cargo,
wood ofLibocedrus decurrens Torr. where there is evidence that the wood has been processed or manufactured for pencils using heat treatment to achieve a minimum temperature of 82 °C for a seven to eight-day period,
but including that which has not kept its natural round surface, originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
| Official statement that the wood has undergone an appropriate:
(a) heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the certificates referred to in Article 13.1.(ii),
or
(b) fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
(c) chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%).
|
1.2.Whether or not listed among the CN codes in Annex V, Part B, wood of conifers (Coniferales), except that of Thuja L., in the form of: chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,
originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
| Official statement that the wood has undergone an appropriate:
(a) heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii),
or
(b) fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h).
|
1.3.Whether or not listed among the CN codes in Annex V, Part B, wood of Thuja L., other than in the form of: chips, particles, sawdust, shavings, wood waste and scrap,
wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
wood used to wedge or support non-wood cargo,
originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
| Official statement that the wood:
(b) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “K.D.” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage,
or
(c) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage and on the certificates referred to in Article 13.1.(ii),
or
(d) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
(e) has undergone an appropriate chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%).
|
1.4.Whether or not listed among the CN codes in Annex V, Part B, wood of Thuja L., in the form of: chips, particles, sawdust, shavings, wood waste and scrap,
originating in Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
| Official statement that the wood:
(a) has been produced from debarked round wood,
or
(b) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule,
or
(c) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
(d) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii).
|
1.5.Whether or not listed among the CN codes in Annex V, Part B, wood of conifers (Coniferales), other than in the form of: chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,
wood packaging material in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
wood used to wedge or support non-wood cargo,
but including that which has not kept its natural round surface, originating in Russia, Kazakhstan and Turkey.
| Official statement that the wood:
(a) originates in areas known to be free from:
Monochamus spp. (non-European)
Pissodes spp. (non-European)
Scolytidae spp. (non-European)
The area shall be mentioned on the certificates referred to in Article 13.1.(ii), under the rubric “place of origin,”
or
(b) is bark-free and free from grub holes, caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3 mm across,
or
(c) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “K.D”. or another internationally recognised mark, put on the wood or on any wrapping in accordance with the current usage,
or
(d) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the certificates referred to in Article 13.1.(ii),
or
(e) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
(f) has undergone an appropriate chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%).
|
1.6.Whether or not listed among the CN codes in Annex V, Part B, wood of conifers (Coniferales), other than in the form of: chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or part from these conifers,
wood packaging material, in the form of packing cases, boxes, crates, drums and similar packings, pallets, box pallets and other load boards, pallet collars, actually in use in the transport of objects of all kinds,
wood used to wedge or support non-wood cargo,
but including that which has not kept its natural round surface, originating in third countries, other than:
Russia, Kazakhstan and Turkey,
European countries,
Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
| Official statement that the wood:
(a) is bark-free and free from grub holes, caused by the genus Monochamus spp. (non-European), defined for this purpose as those which are larger than 3 mm across,
or
(b) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule. There shall be evidence thereof by a mark “kiln-dried” or “K.D” or another internationally recognised mark, put on the wood or on any wrapping in accordance with current usage,
or
(c) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
(d) has undergone an appropriate chemical pressure impregnation with a product approved in accordance with the procedure laid down in Article 18.2. There shall be evidence thereof by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the pressure (psi or kPa) and the concentration (%),
or
(e) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes. There shall be evidence thereof by a mark “HT” put on the wood or on any wrapping in accordance with current usage, and on the certificates referred to in Article 13.1.(ii).
|
1.7.Whether or not listed among the CN codes listed in Annex V, Part B, wood in the form of chips, particles, sawdust, shavings, wood waste and scrap obtained in whole or in part from conifers (Coniferales), originating in Russia, Kazakhstan and Turkey,
non-European countries other than Canada, China, Japan, the Republic of Korea, Mexico, Taiwan and the USA, where Bursaphelenchus xylophilus (Steiner et Bührer) Nickle et al. is known to occur.
| Official statement that the wood:
(a) originates in areas known to be free from:
Monochamus spp. (non-European)
Pissodes spp. (non-European)
Scolytidae spp. (non-European)
The area shall be mentioned on the certificates referred to in Article 13.1.(ii), under the rubric “place of origin,”
or
(b) has been produced from debarked round wood,
or
(c) has undergone kiln-drying to below 20 % moisture content, expressed as a percentage of dry matter, achieved through an appropriate time/temperature schedule,
or
(d) has undergone an appropriate fumigation to a specification approved in accordance with the procedure laid down in Article 18.2. There shall be evidence of the fumigation by indicating on the certificates referred to in Article 13.1.(ii), the active ingredient, the minimum wood temperature, the rate (g/m3) and the exposure time (h),
or
(e) has undergone an appropriate heat treatment to achieve a minimum core temperature of 56 °C for at least 30 minutes, the latter to be indicated on the certificates referred to in Article 13.1.(ii).’
|
