Commission Directive 2005/38/EC (repealed)Show full title

ANNEX I U.K. METHODS OF SAMPLING FOR OFFICIAL CONTROL OF THE LEVELS OF FUSARIUM TOXINS IN CERTAIN FOODSTUFFS

1. Purpose and scope U.K.

Samples intended for official checking of the levels of Fusarium toxins content in foodstuffs shall be taken according to the methods set out in this Annex. Aggregate samples thus obtained shall be considered as representative of the lots. Compliance with maximum limits laid down in Annex I to Regulation (EC) 466/2001 shall be established on the basis of the levels determined in the laboratory samples.

2. Definitions U.K.

For the purpose of this Annex, the following definitions shall apply:

2.1. Lot

:

an identifiable quantity of a food commodity delivered at one time and determined by the official to have common characteristics, such as origin, variety, type of packing, packer, consignor or markings.

2.2. Sublot

:

designated part of a large lot in order to apply the sampling method on that designated part; each sublot must be physically separate and identifiable.

2.3. Incremental sample

:

a quantity of material taken from a single place in the lot or sublot.

2.4. Aggregate sample

:

the combined total of all the incremental samples taken from the lot or sublot.

3. General provisions U.K.

3.1. Personnel U.K.

Sampling shall be performed by an authorised person as designated by the Member State.

3.2. Material to be sampled U.K.

Each lot which is to be examined must be sampled separately. In accordance with the point 4.3, large lots must be subdivided into sublots to be sampled separately.

3.3. Precautions to be taken U.K.

In the course of sampling and preparation of the samples precautions, must be taken to avoid any changes, which would affect the Fusarium toxin content, adversely affect the analytical determination or make the aggregate samples unrepresentative.

3.4. Incremental samples U.K.

As far as possible incremental samples shall be taken at various places distributed throughout the lot or sublot. Departure from such procedure must be recorded in the record.

3.5. Preparation of the aggregate sample U.K.

The aggregate sample shall be made up by uniting the incremental samples.

3.6. Replicate samples U.K.

The replicate samples for enforcement, trade (defence) and reference (referee) purposes shall be taken from the homogenised aggregate sample, unless such procedure conflicts with Member States’ rules.

3.7. Packaging and transmission of samples U.K.

Each sample shall be placed in a clean, inert container offering adequate protection from contamination and against damage in transit. All necessary precautions shall be taken to avoid any change in composition of the sample, which might arise during transportation or storage.

3.8. Sealing and labelling of samples U.K.

Each sample taken for official use shall be sealed at the place of sampling and identified following the regulations of the Member State.

A record must be kept of each sampling, permitting each lot to be identified unambiguously and giving the date and place of sampling together with any additional information likely to be of assistance to the analyst.

4. Specific provisions U.K.

4.1. Different types of lots U.K.

Food commodities may be traded in bulk, containers, or individual packings, such as sacks, bags, retail packings. The sampling procedure may be applied to all the different forms in which the commodities are put on the market.

Without prejudice to the specific provisions set out in points 4.3, 4.4 and 4.5, the following formula may be used as a guide for the sampling of lots traded in individual packs, such as sacks, bags, retail packings.

• weight: in kg

• sampling frequency (SF): every nth sack or bag from which an incremental sample must be taken (decimal figures should be rounded to the nearest whole number).

4.2. Weight of the incremental sample U.K.

The weight of the incremental sample must be about 100 grams, unless otherwise defined in this Annex. In the case of lots in retail packings, the weight of the incremental sample shall depend on the weight of the retail packing.

4.3. General survey of the sampling procedure for cereals and cereal products U.K.

Table 1

Subdivision of lots into sublots depending on product and lot weight

a Depending on the lot weight — see Table 2.
Commodity	Lot weight(tonnes)	Weight or number of sublots	No incremental samples	Aggregate sample Weight(kg)
Cereals and cereal products	≥ 1 500	500 tonnes	100	10
	> 300 and < 1 500	3 sublots	100	10
	≥ 50 and ≤ 300	100 tonnes	100	10
	< 50	—	3-100a	1-10

4.4. Sampling procedure for cereals and cereal products for lots ≥ 50 tonnes U.K.

• On condition that the sublot can be separated physically, each lot must be subdivided into sublots following Table 1. Taking into account that the weight of the lot is not always an exact multiple of the weight of the sublots, the weight of the sublot may exceed the mentioned weight by a maximum of 20 %.

• Each sublot must be sampled separately.

• Number of incremental samples: 100. Weight of the aggregate sample = 10 kg.

• If it is not possible to carry out the method of sampling set out in this point because of the commercial consequences resulting from damage to the lot such as packaging forms, means of transport, an alternative method of sampling may be applied provided that it is as representative as possible and is fully described and documented.

4.5. Sampling procedure for cereals and cereal products for lots < 50 tonnes U.K.

For lots of cereals and cereal products less than 50 tonnes, the sampling plan must be used with 10 to 100 incremental samples, depending on the lot weight, resulting in an aggregate sample of 1 to 10 kg. For very small lots (≤ 0,5 tonnes) a lower number of incremental samples may be taken, but the aggregate sample uniting all incremental samples shall be also in that case at least 1 kg.

The figures in Table 2 may be used to determine the number of incremental samples to be taken.

Table 2

Number of incremental samples to be taken depending on the weight of the lot of cereals and cereal products

Lot weight (tonnes)	No of incremental samples
≤ 0,05	3
> 0,05-≤ 0,5	5
> 0,5-≤ 1	10
> 1-≤ 3	20
> 3-≤ 10	40
> 10-≤ 20	60
> 20-≤ 50	100

4.6. Sampling procedure for foods intended for infants and young children U.K.

• The sampling procedure for cereals and cereal products as set out in point 4.5 shall apply to food intended for infants and young children. Accordingly the number of incremental samples to be taken shall depend on the weight of the lot, with a minimum of 10 and a maximum of 100, in accordance with Table 2 at point 4.5. For very small lots (≤ 0,5 tonnes) a lower number of incremental samples may be taken, but the aggregate sample uniting all incremental samples shall be also in that case at least 1 kg.

• Weight of the incremental sample must be about 100 grams. In the case of lots in retail packing, the weight of the incremental sample shall depend on the weight of the retail packing and in case of very small lots (≤ 0,5 tonnes) the incremental samples must have a weight as such that uniting the incremental samples results in an aggregate sample of at least 1 kg.

• Weight of aggregate sampling = 1-10 kg sufficiently mixed.

4.7. Sampling at retail stage U.K.

Sampling of foodstuffs at the retail stage must be done where possible in accordance with the sampling provisions set out in points 4.4. and 4.5. Where that is not possible, other effective sampling procedures at retail stage may be used provided that they ensure sufficient representativeness for the sampled lot.

5. Acceptance of a lot or sublot U.K.

• Acceptance if the aggregate sample conforms to the maximum limit, taking into account the measurement uncertainty and correction for recovery.

• Rejection if the aggregate sample exceeds the maximum limit beyond reasonable doubt taking into account the measurement uncertainty and correction for recovery.