- Latest available (Revised)
- Original (As adopted by EU)
Commission Directive 2005/5/EC of 26 January 2005 amending Directive 2002/26/EC as regards sampling methods and methods of analysis for the official control of the levels of ochratoxin A in certain foodstuffs (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
points 4.3, 4.4 and 4.5 are replaced by the following:
Subdivision of lots into sublots depending on product and lot weight
a Depending on the lot weight — see table 2 of this Annex. | ||||
b Depending on the lot weight — see table 3 of this Annex. | ||||
Commodity | Lot weight(ton) | Weight or number of sublots | No of incremental samples | Aggregate sample weight(kg) |
---|---|---|---|---|
Cereals and cereal products | ≥ 1 500 | 500 tonnes | 100 | 10 |
> 300 and < 1 500 | 3 sublots | 100 | 10 | |
≥ 50 and ≤ 300 | 100 tonnes | 100 | 10 | |
< 50 | — | 3-100a | 1-10 | |
Dried vine fruit (currants, raisins and sultanas) | ≥ 15 | 15-30 tonnes | 100 | 10 |
< 15 | — | 10-100b | 1-10 | |
Roasted coffee beans, ground roasted coffee and soluble coffee | ≥ 15 | 15-30 tonnes | 100 | 10 |
< 15 | — | 10-100b | 1-10 |
On condition that the sublot can be separated physically, each lot must be subdivided into sublots following table 1. Taking into account that the weight of the lot is not always an exact multiple of the weight of the sublots, the weight of the sublot may vary from the mentioned weight by a maximum of 20 %.
Each sublot must to be sampled separately.
Number of incremental samples: 100.
Weight of the aggregate sample = 10 kg.
If it is not possible to carry out the method of sampling described above because of the commercial consequences resulting from damage to the lot (because of packaging forms, means of transport, etc.) an alternative method of sampling may be applied provided that it is as representative as possible and is fully described and documented.
For cereal lots under 50 tonnes and for roasted coffee beans, ground roasted coffee, soluble coffee and dried vine fruit lots under 15 tonnes the sampling plan has to be used with 10 to 100 incremental samples, depending on the lot weight, resulting in an aggregate sample of 1 to 10 kg. For very small lots (≤ 0,5 tonnes) of cereals and cereal products a lower number of incremental samples can be taken, but the aggregate sample uniting all incremental samples shall be also in that case at least 1 kg.
The figures in the following table can be used to determine the number of incremental samples to be taken.
Number of incremental samples to be taken depending on the weight of the lot of cereals and cereal products
Lot weight (tonnes) | No of incremental samples |
---|---|
≤ 0,05 | 3 |
> 0,05-≤ 0,5 | 5 |
> 0,5-≤ 1 | 10 |
> 1-≤ 3 | 20 |
> 3-≤ 10 | 40 |
> 10-≤ 20 | 60 |
> 20-≤ 50 | 100 |
Number of incremental samples to be taken depending on the weight of the lot of roasted coffee beans, ground roasted coffee, soluble coffee and dried vine fruit
Lot weight (tonnes) | No of incremental samples |
---|---|
≤ 0,1 | 10 |
> 0,1-≤ 0,2 | 15 |
> 0,2-≤ 0,5 | 20 |
> 0,5-≤ 1,0 | 30 |
> 1,0-≤ 2,0 | 40 |
> 2,0-≤ 5,0 | 60 |
> 5,0-≤ 10,0 | 80 |
> 10,0-≤ 15,0 | 100’ |
the following point 4.6(a) is inserted after point 4.6:
The aggregate sample shall be at least 1 kg except where it is not possible e.g. when the sample consists of 1 bottle.
The minimum number of incremental samples to be taken from the lot shall be as given in table 4. The number of incremental samples determined is function of the usual form in which the products concerned are commercialised. In the case of bulk liquid products, the lot shall be thoroughly mixed insofar as possible and insofar as it does not affect the quality of the product, by either manual or mechanical means immediately prior to sampling. In this case, a homogeneous distribution of ochratoxin A can be assumed within a given lot. It is therefore sufficient to take three incremental samples from a lot to form the aggregate sample.
The incremental samples, which might frequently be a bottle or a package, shall be of similar weight. The weight of an incremental sample should be at least 100 grams, resulting in an aggregate sample of at least about 1 kg. Departure from this procedure must be recorded in the record provided for in point 3.8.
Minimum number of incremental samples to be taken from the lot
Form of commercialisation | Weight of lot (in litres) | Minimum number of incremental samples to be taken |
---|---|---|
Bulk (grape juice, wine) | … | 3 |
Bottles/packages grape juice | ≤ 50 | 3 |
Bottles/packages grape juice | 50 to 500 | 5 |
Bottles/packages grape juice | > 500 | 10 |
Bottles/packages wine | ≤ 50 | 1 |
Bottles/packages wine | 50 to 500 | 2 |
Bottles/packages wine | > 500 | 3’ |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: