Article 7.Presumption of conformity and harmonised standards
Article 9.Specific measures to deal with potentially hazardous machinery
Article 12.Procedures for assessing the conformity of machinery
Essential health and safety requirements relating to the the design and construction of machinery
1. The manufacturer of machinery or his authorised representative must ensure...
2. The obligations laid down by the essential health and safety...
3. The essential health and safety requirements laid down in this...
4. This Annex is organised in several parts. The first one...
2. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR CERTAIN CATEGORIES OF...
3. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS TO OFFSET HAZARDS DUE...
4. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS TO OFFSET HAZARDS DUE...
5. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR MACHINERY INTENDED FOR...
6. SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR MACHINERY PRESENTING PARTICULAR...
1. Circular saws (single- or multi-blade) for working with wood and...
3. Thicknessers for one-side dressing having a built-in mechanical feed device,...
4. Band-saws with manual loading and/or unloading for working with wood...
5. Combined machinery of the types referred to in points 1...
6. Hand-fed tenoning machinery with several tool holders for woodworking.
7. Hand-fed vertical spindle moulding machinery for working with wood and...
9. Presses, including press-brakes, for the cold working of metals, with...
10. Injection or compression plastics-moulding machinery with manual loading or unloading....
11. Injection or compression rubber-moulding machinery with manual loading or unloading....
12. Machinery for underground working of the following types:
13. Manually loaded trucks for the collection of household refuse incorporating...
14. Removable mechanical transmission devices including their guards.
18. Portable cartridge-operated fixing and other impact machinery.
19. Protective devices designed to detect the presence of persons.
20. Power-operated interlocking movable guards designed to be used as safeguards...
Indicative list of the safety components referred to in Article 2(c)
2. Protective devices designed to detect the presence of persons.
3. Power-operated interlocking movable guards designed to be used as safeguards...
5. Valves with additional means for failure detection intended for the...
7. Guards and protective devices designed to protect persons against moving...
8. Monitoring devices for loading and movement control in lifting machinery....
11. Discharging systems to prevent the build-up of potentially dangerous electrostatic...
12. Energy limiters and relief devices referred to in sections 1.5.7,...
13. Systems and devices to reduce the emission of noise and...
17. Components for machinery designed for lifting and/or lowering persons between...
Assessment of conformity with internal checks on the manufacture of machinery
EC type-examination is the procedure whereby a notified body ascertains...
1. The manufacturer or his authorised representative must, for each type,...
2. For each type, the application for an EC type-examination shall...
4. If the type satisfies the provisions of this Directive, the...
6. The applicant shall inform the notified body which retains the...
7. The Commission, the Member States and the other notified bodies...
8. Files and correspondence referring to the EC type-examination procedures shall...
9.1. The notified body has the ongoing responsibility of ensuring that...
9.2. The manufacturer of the machinery concerned has the ongoing responsibility...
9.3. The manufacturer shall request from the notified body the review...
9.4. In the event that the validity of the EC-type examination...
This Annex describes the conformity assessment of machinery referred to...
1. The manufacturer must operate an approved quality system for design,...
2.1. The manufacturer or his authorised representative shall lodge an application...
2.2. The quality system must ensure conformity of the machinery with...
2.3. The notified body shall assess the quality system to determine...
2.4. The manufacturer shall undertake to fulfil the obligations arising from...
3. Surveillance under the responsibility of the notified body
3.1. The purpose of surveillance is to make sure that the...
3.2. The manufacturer shall, for inspection purposes, allow the notified body...
3.3. The notified body shall conduct periodic audits to make sure...
3.4. Moreover, the notified body may pay the manufacturer unannounced visits....
4. The manufacturer or his authorised representative shall keep available for...
Minimum criteria to be taken into account by Member States for the notification of bodies
1. The body, its director and the staff responsible for carrying...
2. The body and its staff shall carry out the verification...
3. For each category of machinery for which it is notified,...
5. The impartiality of inspection staff shall be guaranteed. Their remuneration...
6. The body shall take out liability insurance unless its liability...
8. Notified bodies shall participate in coordination activities. They shall also...
9. Member States may take all necessary measures they regard as...