Article 9.01General
1.Where there are no specific requirements concerning certain parts of an installation the safety level shall be considered satisfactory where those parts have been produced in accordance with a European standard in force or in accordance with the requirements of an approved classification society.
The relevant documents shall be submitted to the inspection body.
2.Documents containing the following, and duly stamped by the inspection body, shall be kept on board:
(a)general drawings concerning the entire electrical installation;
(b)switching diagrams for the main switchboard, the emergency switchboard and the distribution switchboard, together with the most important technical data such as the amperage and rated current of the protection and control devices;
(c)power data concerning the electrical machinery and equipment;
(d)types of cable and information on conductor cross-sections.
It is not necessary to keep such documents on board unmanned craft, but they shall be available at all times with the owner.
3.The equipment shall be designed for permanent lists of up to 15° and ambient inside temperatures of between 0 and + 40 °C, and on the deck between - 20 °C and + 40 °C. It shall function perfectly within those limits.
4.The electrical and electronic equipment and appliances shall be fully accessible and easy to maintain.