Article 1Objectives and scope
Article 2Definitions
Article 3Categorisation
Article 4Obligations of the manufacturer importer and distributor
Article 5Placing on the market
Article 6Free Movement
Article 7Age limits
Article 8Harmonised standards
Article 9Conformity assessment procedures
Article 10Notified bodies
Article 11Obligation to affix the CE marking
Article 12Labelling of articles other than pyrotechnic articles for vehicles
Article 13Labelling of pyrotechnic articles for vehicles
Article 14Market surveillance
Article 15Rapid information on products presenting serious risks
Article 16Safeguard clause
Article 17Measures entailing refusal or restriction
Article 18Implementing measures
Article 19Committee
Article 20Penalties
Article 21Transposition
Article 22Entry into force
Article 23Addressees
ANNEX IEssential safety requirements
(1). . . . . . . . . ....
(2). . . . . . . . . ....
(3)Each pyrotechnic article must function correctly when used for its...
(4)Pyrotechnic articles must not contain:
(5)The various groups of pyrotechnic articles must at least also...
A.Fireworks
B.Other pyrotechnic articles
C.Ignition devices
ANNEX IIConformity assessment procedures
1.MODULE B: EC type-examination
1.. . . . . . . . . ....
2.The application for EC type-examination must be lodged by the...
3.The technical documents must enable the conformity of the article...
4.The notified body must:
5.Where the type meets the relevant provisions of this Directive,...
6.. . . . . . . . . ....
7.. . . . . . . . . ....
8.. . . . . . . . . ....
9.The manufacturer must keep with the technical documents copies of...
2.MODULE C: Conformity to type
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.The manufacturer must keep a copy of the declaration of...
4.A notified body chosen by the manufacturer must perform or...
3.MODULE D: Production quality assurance
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.Quality system
3.1.The manufacturer must lodge an application for assessment of his...
3.2.The quality system must ensure the conformity of pyrotechnic articles...
3.3.The notified body must assess the quality system to determine...
3.4.The manufacturer must undertake to fulfil the obligations arising out...
4.Monitoring under the responsibility of the notified body
4.1.. . . . . . . . . ....
4.2.The manufacturer must allow the notified body access for inspection...
4.3.. . . . . . . . . ....
4.4.. . . . . . . . . ....
5.The manufacturer must, for a period of at least 10...
6.. . . . . . . . . ....
4.MODULE E: Product quality assurance
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.Quality system
3.1.The manufacturer must lodge an application with the notified body...
3.2.Under the quality system, each pyrotechnic article must be examined...
3.3.The notified body must assess the quality system to determine...
3.4.The manufacturer must undertake to fulfil the obligations arising out...
4.Monitoring under the responsibility of the notified body
4.1.. . . . . . . . . ....
4.2.The manufacturer must allow the notified body access for inspection...
4.3.. . . . . . . . . ....
4.4.. . . . . . . . . ....
5.The manufacturer must for a period of at least 10...
6.. . . . . . . . . ....
5.MODULE G: Unit verification
1.. . . . . . . . . ....
2.The notified body must examine the pyrotechnic article and carry...
3.The aim of the technical documents is to enable conformity...
6.MODULE H: Full quality assurance
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.Quality system
3.1.The manufacturer must lodge an application for assessment of his...
3.2.The quality system must ensure the conformity of the article...
3.3.The notified body must assess the quality system to determine...
3.4.The manufacturer must undertake to fulfil the obligations arising out...
4.EC monitoring under the responsibility of the notified body
4.1.. . . . . . . . . ....
4.2.The manufacturer must allow the notified body access for inspection...
4.3.. . . . . . . . . ....
4.4.. . . . . . . . . ....
5.The manufacturer must, for a period of at least 10...
6.. . . . . . . . . ....
ANNEX IIIMinimum criteria to be taken into account by Member States for the bodies responsible for conformity assessments
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.. . . . . . . . . ....
4.The staff responsible for inspection must have:
5.. . . . . . . . . ....
6.. . . . . . . . . ....
7.. . . . . . . . . ....
ANNEX IVConformity marking
. . . . . . . . . ....
. . . . . . . . . ....

Directive 2007/23/EC of the European Parliament and of the Council

of 23 May 2007

on the placing on the market of pyrotechnic articles

(Text with EEA relevance) (repealed)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .