[F10. GENERAL U.K.
0.1. Make (trade name of manufacturer): … U.K.
0.2. Type: … U.K.
0.2.0.1. Chassis: … U.K.
0.2.0.2. Bodywork/complete vehicle: … U.K.
0.2.1. Commercial name(s) (if available): … U.K.
[F20.2.2. For multi-stage approved vehicles, type-approval information of the base/previous stage vehicle (list the information for each stage. This can be done with a matrix) U.K.
Type:
Variant(s):
Version(s):
Type-approval number, including extension number …]
Textual Amendments
F2 Inserted by Commission Regulation (EU) No 1171/2014 of 31 October 2014 amending and correcting Annexes I, III, VI, IX, XI and XVII to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Text with EEA relevance).
[F30.2.2.1. Allowed Parameter Values for multistage type approval to use the base vehicle emission values (insert range if applicable) ( y ): U.K.
Final Vehicle mass in running order (in kg): …
Frontal area for final vehicle (in cm 2 ): …
Rolling resistance (kg/t): …
Cross-sectional area of air entrance of the front grille (in cm 2 ): …
Textual Amendments
F3 Inserted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).
0.2.3. Identifiers ( y ): U.K.
0.2.3.1. interpolation family's identifier: … U.K.
0.2.3.2. ATCT family's identifier: … U.K.
0.2.3.3. PEMS family's identifier: … U.K.
0.2.3.4. Roadload family's identifier U.K.
0.2.3.4.1. Roadload family of VH: … U.K.
0.2.3.4.2. Roadload family of VL: … U.K.
0.2.3.4.3. Roadload families applicable in the interpolation family: … U.K.
0.2.3.5. Roadload Matrix family's identifier: … U.K.
0.2.3.6. Periodic regeneration family's identifier: … U.K.
0.2.3.7. Evaporative test family's identifier: … U.K.
0.2.3.8. OBD family's identifier: … U.K.
0.2.3.9. other family's identifier: …] U.K.
[F40.3. Means of identification of type, if marked on the vehicle/component/separate technical unit (4) (2) : …] U.K.
Textual Amendments
F4 Substituted by Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance).
0.3.0.1. Chassis: … U.K.
0.3.0.2. Bodywork/complete vehicle: … U.K.
0.3.1. Location of that marking: … U.K.
0.3.1.1. Chassis: … U.K.
0.3.1.2. Bodywork/complete vehicle: … U.K.
0.4. Category of vehicle (3) : … U.K.
0.4.1. Classification(s) according to the dangerous goods which the vehicle is intended to transport: … U.K.
[F50.5. Company name and address of manufacturer: …] U.K.
Textual Amendments
F5 Substituted by Commission Regulation (EU) No 1230/2012 of 12 December 2012 implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council with regard to type-approval requirements for masses and dimensions of motor vehicles and their trailers and amending Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance).
[F20.5.1. For multi-stage approved vehicles, company name and address of the manufacturer of the base/previous stage(s) vehicle: …] U.K.
0.6. Location and method of attachment of statutory plates and location of vehicle identification number: … U.K.
0.6.1. On the chassis: … U.K.
0.6.2. On the bodywork: … U.K.
0.7. (Not attributed) U.K.
0.8. Name(s) and address(es) of assembly plant(s): … U.K.
0.9. Name and address of the manufacturer's representative (if any): …] U.K.
Textual Amendments
F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).
[F1 [F4If a part has been type-approved, that part need not be described if reference is made to such approval. Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or drawings. For each item for which drawings or photographs shall be attached, give numbers of the corresponding attached documents.]
[F4If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘ ? ’ (e.g. ABC??123??).]
Classified according to the definitions set out in Part A of Annex II.
Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).]
Textual Amendments
F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).
F4 Substituted by Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance).