ANNEX IComplete list of information for the purpose of EC type-approval of vehicles
12.MISCELLANEOUS
12.1.
Audible warning device(s)
12.1.1.
Location, method of affixing, placement and orientation of the device(s), with dimensions:
12.1.2.
Number of device(s):
12.1.3.
EC type-approval number(s):
12.1.4.
Electrical/pneumatic (1) circuit diagram:
12.1.5.
Rated voltage or pressure:
12.1.6.
Drawing of the mounting device:
12.2.
Devices to prevent unauthorised use of the vehicle
12.2.1.
Protective device
12.2.1.1.
A detailed description of the vehicle type with regard to the arrangement and design of the control or of the unit on which the protective device acts:
12.2.1.2.
Drawings of the protective device and of its mounting on the vehicle:
12.2.1.3.
A technical description of the device:
12.2.1.4.
Details of the lock combinations used:
12.2.1.5.
Vehicle immobiliser
12.2.1.5.1.
EC type-approval number, if available:
12.2.1.5.2.
For immobilisers not yet approved
12.2.1.5.2.1.
A detailed technical description of the vehicle immobiliser and of the measures taken against inadvertent activation:
12.2.1.5.2.2.
The system(s) on which the vehicle immobiliser acts:
12.2.1.5.2.3.
Number of effective interchangeable codes, if applicable:
12.2.2.
Alarm system (if any)
12.2.2.1.
EC type-approval number, if available:
12.2.2.2.
For alarm systems not yet approved
12.2.2.2.1.
A detailed description of the alarm system and of the vehicle parts related to the alarm system installed:
12.2.2.2.2.
A list of the main components comprising the alarm system:
12.2.3.
A brief description of the electrical/electronic components (if any):
12.3.
Towing device(s)
12.3.1.
Front: Hook/eye/other (1)
12.3.2.
Rear: Hook/eye/other/none (1)
12.3.3.
Drawing or photograph of the chassis/area of the vehicle body showing the position, construction and mounting of the towing device(s):
12.4.
Details of any non-engine related devices designed to influence fuel consumption (if not covered by other items):
12.5.
Details of any non-engine related devices designed to reduce noise (if not covered by other items):
12.6.
Speed limiters (Directive 92/24/EEC)
12.6.1.
Manufacturer(s):
12.6.2.
Type(s):
12.6.3.
EC type-approval number(s), if available:
12.6.4.
Speed or range of speeds at which the speed limitation may be set: … km/h
12.7.
Table of installation and use of RF transmitters in the vehicle(s), if applicable:
Frequency bands (Hz) | max. output power (W) | antenna position at vehicle, specific conditions for installation and/or use |
The applicant for type-approval must also supply, where appropriate:
Appendix 1
A list (with make(s) and type(s) of all electrical and/or electronic components concerned by this Directive (see points 2.1.9. and 2.1.10. of Directive 2004/104/EC) and not previously listed.
Appendix 2
Schematics or drawing of the general arrangement of electrical and/or electronic components (concerned by Directive 2004/104/EC) and the general wiring harness arrangement.
Appendix 3
Description of vehicle chosen to represent the type
Body style:
Left or right hand drive:
Wheelbase:
Appendix 4
Relevant test report(s) supplied by the manufacturer or approved/recognised laboratories for the purpose of drawing up the type-approval certificate.
12.7.1.
Vehicle equipped with a 24 GHz short-range radar equipment: Yes/No (strike out which is not applicable).
12.7.2.
Vehicle equipped with a 79 GHz short-range radar equipment: Yes/No (strike out which is not applicable)