Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance) (repealed) (c. 46)

[F1 ANNEX I U.K. [F2 COMPLETE LIST OF INFORMATION FOR THE PURPOSE OF EC TYPE-APPROVAL OF VEHICLES, COMPONENTS OR SEPARATE TECHNICAL UNITS] (1)

Textual Amendments

F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).

F2 Substituted by Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance).

14. SPECIAL PROVISIONS FOR VEHICLES INTENDED FOR THE TRANSPORT OF DANGEROUS GOODS U.K.

14.1. Electrical equipment according to Council Directive 94/55/EC ( OJ L 319, 12.12.1994, p. 1 ) U.K.

14.1.1. Protection against overheating of conductors: … U.K.

14.1.2. Type of circuit breaker: … U.K.

14.1.3. Type and operation of battery master switch: … U.K.

14.1.4. Description and location of safety barrier for tachograph: … U.K.

14.1.5. Description of permanently energised installations. Indicate the EN standard applied: … U.K.

14.1.6. Construction and protection of electrical installation situated to the rear of the driver's compartment: … U.K.

14.2. Prevention of fire risks U.K.

14.2.1. Type of not readily flammable material in the driver's compartment: … U.K.

14.2.2. Type of heat shield behind the driver's compartment (if applicable): … U.K.

14.2.3. Position and heat protection of engine: … U.K.

14.2.4. Position and heat protection of the exhaust system: … U.K.

14.2.5. Type and design of the endurance braking systems heat protection: … U.K.

14.2.6. Type, design and position of combustion heaters: … U.K.

14.3. Special requirements for bodywork, if any, according to Directive 94/55/EC U.K.

14.3.1. Description of measures to comply with the requirements for Type EX/II and Type EX/III vehicles: … U.K.

14.3.2. In the case of Type EX/III vehicles, resistance against heat from the outside: …] U.K.

(1)

[F1 [F2 If a part has been type-approved, that part need not be described if reference is made to such approval. Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or drawings. For each item for which drawings or photographs shall be attached, give numbers of the corresponding attached documents.] ]

Textual Amendments

F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).

F2 Substituted by Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance).