[F115. REUSABILITY, RECYCLABILITY AND RECOVERABILITY U.K.
15.1. Version to which the reference vehicle belongs: … U.K.
15.2. Mass of the reference vehicle with bodywork or mass of the chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted) without driver: … U.K.
15.3. Mass of materials of the reference vehicle: … U.K.
15.3.1. Mass of material taken into account at the pre-treatment step (2) : … U.K.
15.3.2. Mass of the material taken into account at the dismantling step (2) : … U.K.
15.3.3. Mass of material taken into account at the non-metallic residue treatment step, considered as recyclable (2) : … U.K.
15.3.4. Mass of material taken into account at the non-metallic residue treatment step, considered as energy recoverable (2) : … U.K.
15.3.5. Materials breakdown (2) : … U.K.
15.3.6. Total mass of materials, which are reusable and/or recyclable: … U.K.
15.3.7. Total mass of materials, which are reusable and/or recoverable: … U.K.
15.4. Rates U.K.
15.4.1. Recyclability rate ‘R cyc ’ (%): … U.K.
15.4.2. Recoverability rate ‘R cov ’ (%): …] U.K.
Textual Amendments
F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).
[F1 [F1If a part has been type-approved, that part need not be described if reference is made to such approval. Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or drawings. For each item for which drawings or photographs shall be attached, give numbers of the corresponding attached documents.]
These terms are defined in the standard ISO 22628: 2002 — Road vehicles — recyclability and recoverability — calculation method.]
Textual Amendments
F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).
F1 Substituted by Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance).