[F1 ANNEX I U.K. COMPLETE LIST OF INFORMATION FOR THE PURPOSE OF EC TYPE-APPROVAL OF VEHICLES (1)

Textual Amendments

F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).

9. BODYWORK U.K.

9.14. Space for mounting rear registration plates (give range where appropriate, drawings may be used where applicable) U.K.

9.14.1. Height above road surface, upper edge: … U.K.

9.14.2. Height above road surface, lower edge: … U.K.

9.14.3. Distance of the centre line from the longitudinal median plane of the vehicle: … U.K.

9.14.4. Distance from the left vehicle edge: … U.K.

9.14.5. Dimensions (length x width): … U.K.

9.14.6. Inclination of the plane to the vertical: … U.K.

9.14.7. Angle of visibility in the horizontal plane: …] U.K.

(1)

[F1 If a part has been type-approved, that part need not be described if reference is made to such approval. Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or drawings. For each item for which drawings or photographs shall be attached, give numbers of the corresponding attached documents.]

Textual Amendments

F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).