Directive 2007/46/EC of the European Parliament and of the Council (repealed)Show full title

ANNEX VI U.K.

MODEL A Maximum format: A4 (210 × 297 mm) U.K.

EC TYPE-APPROVAL CERTIFICATE U.K.

Stamp of EC type-approval authority

Communication concerning:	Of a type of:
EC type-approvala	complete vehiclea
extension of EC type-approvala	completed vehiclea
refusal of EC type-approvala	incomplete vehiclea
withdrawal of EC type-approvala	vehicle with complete and incomplete variantsa vehicle with completed and incomplete variantsa

with regard to Directive 2007/46/EC

EC type-approval number:

Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer): U.K.

0.2.

Type: U.K.

0.2.1. Commercial name(s)(1): U.K.

0.3.

Means of identification of type, if marked on the vehicle: U.K.

0.3.1. Location of that marking: U.K.

0.4. Category of vehicle(2): U.K.

0.5. Name and address of manufacturer of the complete vehicle^a: U.K.

Name and address of manufacturer of the base vehicle^a (3):

Name and address of manufacturer of the latest built stage of the incomplete vehicle^a (3):

Name and address of manufacturer of the completed vehicle^a (3):

0.8. Name(s) and address(es) of assembly plant(s): U.K.

0.9. Name and address of the manufacturer’s representative (if any): U.K.

SECTION II U.K.

The undersigned hereby certifies the accuracy of the manufacturer’s description in the attached information document of the vehicle(s) described above ((a) sample(s) having been selected by the EC type-approval authority and submitted by the manufacturer as prototype(s) of the vehicle type) and that the attached test results are applicable to the vehicle type. U.K.

1. For complete and completed vehicles/variants^a: U.K.

The vehicle type meets/does not meet^a the technical requirements of all the relevant regulatory acts as prescribed in Annex IV and Annex XI^a (3) to Directive 2007/46/EC.

2. For incomplete vehicles/variants^a: U.K.

The vehicle type meets/does not meet^a the technical requirements of the regulatory acts listed in the table on side 2.

3. The approval is granted/refused/withdrawn^a. U.K.

4. The approval is granted in accordance with Article 20 and the validity of the approval is thus limited to dd/mm/yy. U.K.

(Place)

(Signature)

(Date)

Attachments:

Information package. Test results (see Annex VIII). Name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign certificates of conformity and a statement of their position in the company.

NB: If this model is used for type-approval pursuant to Articles 20, 22 or 23, it may not bear the heading ‘EC Vehicle Type-Approval Certificate’, except:

• in the case mentioned in Article 20 where the Commission has decided to allow a Member State to grant a type-approval in accordance with this Directive,

• in the case of vehicles of the category M₁, type-approved according to the procedure prescribed in Article 22.

EC VEHICLE TYPE-APPROVAL CERTIFICATE U.K.

Side 2

This EC type-approval is, where incomplete and completed vehicles or variants are concerned, based on the approval(s) for incomplete vehicles listed below:

Stage 1: Manufacturer of the base vehicle:

EC type-approval number:

Dated:

Applicable to variants:

Stage 2: Manufacturer:

EC type-approval number:

Dated:

Applicable to variants:

Stage 3: Manufacturer:

EC type-approval number:

Dated:

Applicable to variants:

In the case where the approval includes one or more incomplete variants, list those variants which are complete or completed.

Complete/completed variant(s):

List of requirements applicable to the approved incomplete vehicle type or variant (as appropriate, taking account of the scope and latest amendment to each of the regulatory acts listed below).

(List only subjects for which a EC type-approval exists.)
Item	Subject	Regulatory act reference	Last amended	Applicable to variants

In the case of special purpose vehicles, exemptions granted or special provisions applied pursuant to Annex XI and exemptions granted pursuant to Article 20:

Regulatory act reference	Item number	Kind of approval and nature of exemption	Applicable to variants

Appendix List of regulatory acts to which the type of vehicle complies(to be filled in only in the case of type-approval in accordance with Article 6(3)

a Or UNECE Regulations that are deemed to be equivalent.
Subject		Regulatory act referencea	As amended by	Applicable to variants
1.	Sound levels	70/157/EEC
2.	Emissions	70/220/EEC
3.	Fuel tanks/Rear protective devices	70/221/EEC
4.	Rear registration plate space	70/222/EEC
5.	Steering effort	70/311/EEC
6.	Door latches and hinges	70/387/EEC
7.	Audible warning	70/388/EEC
8.	Rear visibility	71/127/EEC
8A.	Indirect vision devices	2003/97/EC
9.	Braking	71/320/EEC
10.	Suppression (radio)	72/245/EEC
11.	Diesel smoke	72/306/EEC
12.	Interior fittings	74/60/EEC
13.	Anti-theft and immobiliser	74/61/EEC
14.	Protective steering	74/297/EEC
15.	Seat strength	74/408/EEC
16.	Exterior projections	74/483/EEC
17.	Speedometer and reverse gear	75/443/EEC
18.	Plates (statutory)	76/114/EEC
19.	Seat belt anchorages	76/115/EEC
20.	Installation of lighting and light signalling devices	76/756/EEC
21.	Retro reflectors	76/757/EEC
22.	End-outline, front-position (side), rear-position (side), stop, side marker, daytime running lamps	76/758/EEC
23.	Direction indicators	76/759/EEC
24.	Rear registration plate lamps	76/760/EEC
25.	Headlamps (including bulbs)	76/761/EEC
26.	Front fog lamps	76/762/EEC
27.	Towing hooks	77/389/EEC
28.	Rear fog lamps	77/538/EEC
29.	Reversing lamps	77/539/EEC
30.	Parking lamps	77/540/EEC
31.	Seat belts and restraint systems	77/541/EEC
32.	Forward vision	77/649/EEC
33.	Identification of controls	78/316/EEC
34.	Defrost/Demist	78/317/EEC
35.	Wash/Wipe	78/318/EEC
36.	Heating systems	2001/56/EC
37.	Wheel guards	78/549/EEC
38.	Head restraints	78/932/EEC
39.	CO2 emissions/Fuel consumption	80/1268/EEC
40.	Engine power	80/1269/EEC
41.	Diesel emissions	88/77/EEC
42.	Lateral protection	89/297/EEC
43.	Spray-suppression systems	91/226/EEC
44.	Masses and dimensions (cars)	92/21/EEC
45.	Safety glass	92/22/EEC
46.	Tyres	92/23/EEC
47.	Speed limiters	92/24/EEC
48.	Masses and dimensions (other than vehicles referred to in item 44)	97/27/EC
49.	External projections of cabs	92/114/EEC
50.	Couplings	94/20/EC
51.	Flammability	95/28/EC
52.	Buses and coaches	2001/85/EC
53.	Frontal impact	96/79/EC
54.	Side impact	96/27/EC
55.	Vehicles intended for the transport of dangerous goods	98/91/EC
56.	Front underrun protection	2000/40/EC
57.	Pedestrian protection	2003/102/EC

MODEL B U.K.(to be used for system type-approval or vehicle type-approval with regard to a system) U.K.Maximum format: A4 (210 × 297 mm) U.K.

EC TYPE-APPROVAL CERTIFICATE U.K.

Stamp of EC type-approval authority

Communication concerning:
EC type-approvala	a type of system/type of a vehicle with regard to a systema
extension of EC type-approvala
refusal of EC type-approvala
withdrawal of EC type-approvala

with regard to Directive …/…/EC/Regulation (EC) No …/…^a, as last amended by Directive …/…/EC/Regulation (EC) No …/…^a

EC type-approval number:

Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer): U.K.

0.2.

Type: U.K.

0.2.1. Commercial name(s) (if available): U.K.

0.3.

Means of identification of type, if marked on the vehicle(4): U.K.

0.3.1. Location of that marking: U.K.

0.4. Category of vehicle(5): U.K.

0.5. Name and address of manufacturer: U.K.

0.8. Name(s) and address(es) of assembly plant(s): U.K.

0.9. Representative of the manufacturer: U.K.

SECTION II U.K.

1. Additional information (where applicable): see Addendum U.K.

2. Technical service responsible for carrying out the tests: U.K.

3. Date of test report: U.K.

4. Number of test report: U.K.

5. Remarks (if any): see Addendum U.K.

6. Place: U.K.

7. Date: U.K.

8. Signature: U.K.

Attachments:

Information package. Test report.

Addendum to EC type-approval certificate No … U.K.

1.

Additional information U.K.

1.1.

[…]: U.K.

1.1.1. […]: U.K.

[…] U.K.

2.

Type-approval number of each component or separate technical unit installed on the vehicle type to comply with this Directive or Regulation U.K.

2.1. […]: U.K.

3.

Remarks U.K.

3.1. […]: U.K.

MODEL C U.K.(to be used for component/separate technical unit type-approval) U.K.Maximum format: A4 (210 × 297 mm) U.K.

EC TYPE-APPROVAL CERTIFICATE U.K.

Stamp of EC type-approval authority

a Delete where not applicable.
Communication concerning:
EC type-approvala	of a type of component/separate technical unita
extension of EC type-approvala
refusal of EC type-approvala
withdrawal of EC type-approvala

with regard to Directive …/…/EC/Regulation (EC) No …/…^a, as last amended by Directive …/…/EC/Regulation (EC) No …/…^a

EC type-approval number:

Reason for extension:

SECTION I U.K.

0.1. Make (trade name of manufacturer): U.K.

0.2. Type: U.K.

0.3.

Means of identification of type, if marked on the component/separate technical unit^a (4): U.K.

0.3.1. Location of that marking: U.K.

0.5. Name and address of manufacturer: U.K.

0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark: U.K.

0.8. Name(s) and address(es) of assembly plant(s): U.K.

0.9. Name and address of the manufacturer’s representative (if any): U.K.

SECTION II U.K.

1. Additional information (where applicable): see Addendum U.K.

2. Technical service responsible for carrying out the tests: U.K.

3. Date of test report: U.K.

4. Number of test report: U.K.

5. Remarks (if any): see Addendum U.K.

6. Place: U.K.

7. Date: U.K.

8. Signature: U.K.

Attachments:

Information package. Test report.

Addendum to EC type-approval certificate No … U.K.

1.

Additional information U.K.

1.1.

[…]: U.K.

1.1.1. […]: U.K.

[…] U.K.

2.

Restriction of use of the device (if any) U.K.

2.1. […]: U.K.

3.

Remarks U.K.

3.1. […]: U.K.

(1)

If not available at the time of granting the type-approval, this item shall be completed at the latest when the vehicle is introduced on the market.

(2)

As defined in Annex II.A.

(3)

See side 2.

(4)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).

(5)

As defined in Annex II, Section A.