- Latest available (Revised)
- Original (As adopted by EU)
Directive 2007/59/EC of the European Parliament and of the Council of 23 October 2007 on the certification of train drivers operating locomotives and trains on the railway system in the Community
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
After completing specific training in relation to rolling stock, drivers must be able to carry out the following tasks:U.K.
Drivers must be able to:
collect the documentation and the necessary equipment,
check the capacities of the traction unit,
check the information entered in the documents on board the traction unit,
ensure, by performing the checks and tests specified, that the traction unit is capable of providing the required traction power, and that the safety equipment is operating,
checking the availability and functionality of the prescribed protection and safety equipments at the handover of a locomotive or at the start of a trip,
perform any routine preventive maintenance operations.
To operate a locomotive, drivers must be familiar with all the controls and indicators placed at their disposal, in particular those concerning:
traction,
braking,
traffic safety-related elements.
In order to detect and locate anomalies in the rolling stock, report them and determine what is required to repair them, and in certain cases, to take action, drivers must be familiar with:
mechanical structures,
suspension and attachment equipment,
running gear,
safety equipment,
fuel tanks, fuel supply system, exhaust equipment,
the meaning of markings on the inside and outside of the rolling stock, in particular the symbols used for the transportation of dangerous goods,
trip registration systems,
electrical and pneumatic systems,
collection of current and high-voltage systems,
communication equipment (ground-to-train radio, etc.),
arrangements of trips,
the constituent parts of the rolling stock, their purpose, and the devices specific to the hauled stocks, in particular the system of stopping the train by venting the brake pipe,
braking system,
the parts specific to traction units,
traction chain, motors and transmission.
Drivers must be able to:
check and calculate, before departure, that the train’s braking power corresponds to the braking power required for the line, as specified in the vehicle documents,
check the functioning of the various components of the braking system of the traction unit and of the train, as appropriate, before departure, at start-up and during running.
Drivers must be able to:
take note of information given to them before departure,
determine the type of running and the limit speed of the train on the basis of variables such as speed limits, weather conditions or any signalling changes.
Drivers must be able to:
use all available control systems in accordance with the applicable rules,
start the train taking account of adhesion and power constraints,
apply the brakes for decelerations and stops, taking account of the rolling stock and installations.
Drivers must:
be able to be attentive to unusual occurrences concerning the behaviour of the train,
be able to inspect the train and identify signs of anomalies, distinguish between them, react according to their relative importance and try to remedy them, always giving priority to the safety of rail traffic and persons,
know the available means of protection and communication.
Drivers must:
be able to take steps to protect the train and summon assistance in the event of an accident involving persons on board the train,
be able to determine whether the train is transporting dangerous goods and identify them on the basis of train documents and wagon lists,
know the procedures relating to the evacuation of a train in case of emergency.
After an incident, drivers must be able to assess whether the vehicle can continue to run and under what conditions, so as to inform the infrastructure manager of those conditions as soon as possible.
Drivers must be able to determine if an expert evaluation is necessary before the train can continue.
Drivers must be able to take measures to ensure that the train, or parts thereof, does not start up or move unexpectedly, even in the most difficult conditions.
Furthermore, drivers must have knowledge about measures which can stop a train or parts thereof in case it has started to move unexpectedly.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: