- Latest available (Revised)
- Original (As adopted by EU)
Directive 2007/59/EC of the European Parliament and of the Council of 23 October 2007 on the certification of train drivers operating locomotives and trains on the railway system in the Community
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Drivers must be able to check and calculate, before departure, that the train’s braking power corresponds to the braking power required for the line, as specified in the vehicle documents.
Drivers must be able to:
take note of information given to them, such as the speed limits or any signalling changes,
determine the type of running and the limit speed of the train on the basis of the characteristics of the line.
Drivers must be able to anticipate problems and react appropriately in terms of safety and other performances, such as punctuality and economic aspects. They must therefore have a thorough knowledge of the railway lines and installations on their route and of any alternative routes agreed on.
The following aspects are important:
operational conditions (changes of track, one-way running, etc.),
perform a route check and consult the relevant documents,
identification of tracks that can be used for a given type of running,
the applicable traffic rules and the meaning of the signalling system,
the operations regime,
the block system and associated regulations,
station names and the position, and distance-sighting of stations and signal boxes to adapt driving accordingly,
transition signalling between different operating or power supply systems,
speed limits for the different train categories driven,
topographical profiles,
particular braking conditions, for example on lines with a steep downward gradient,
particular operating features: special signals, signs, departure conditions, etc.
Drivers must be able to:
start the trains only when all prescribed conditions are fulfilled (timetable, start order or signal, operation of signals if required, etc.),
observe track-side and in-cab signals, interpret them immediately and without error, and act as specified,
run the train safely according to the specific modes of operation: apply special modes if instructed, temporary speed restrictions, running in opposite direction, permission to pass signals at danger, switching operations, turns, running through construction sites, etc.,
respect scheduled or supplementary stops, and if necessary perform supplementary operations for passengers during these stops, notably opening and closing the doors.
Drivers must be able to:
know the train’s position on the line at all times,
apply the brakes for decelerations and stops, taking account of the rolling stock and installations,
adjust the running of the train in accordance with the timetable and any orders given on saving energy, taking account of the characteristics of the traction unit, the train, the line and the environment.
Drivers must be able to:
be attentive, insofar as train operation permits, to unusual occurrences concerning the infrastructure and the environment: signals, tracks, energy supply, level crossings, track surrounding, other traffic,
know particular distances to clear obstacles,
inform the infrastructure manager as soon as possible of the place and nature of anomalies observed, making sure that the information has been understood,
taking into account the infrastructure, ensure or take measures to ensure the safety of traffic and persons, whenever necessary.
Drivers must be able to:
take steps to protect the train and summon assistance in the event of an accident involving persons,
determine where to stop the train in the event of a fire and facilitate the evacuation of passengers, if necessary,
provide useful information on the fire as soon as possible if the fire cannot be brought under control by the driver acting alone,
inform the infrastructure manager of these conditions as soon as possible,
assess whether the infrastructure allows the vehicle to continue to run and under which conditions.
the railway undertaking shall request the infrastructure manager for a derogation with regard to the concerned drivers. In order to ensure a fair and equal treatment of the applicants, the infrastructure manager shall apply to each submitted request for derogation the same assessment procedure, which shall be part of the network statement;
the infrastructure manager shall grant a derogation if the railway undertaking demonstrates that it has made sufficient arrangements for ensuring communication between the concerned drivers and the staff of the infrastructure manager in routine, degraded and emergency situations, as provided for in paragraph 1;
railway undertakings and infrastructure managers shall ensure that the concerned staff is aware of those rules and arrangements and receive appropriate training through their safety management systems.
the applicants shall identify the parts of the network and nature of the services concerned, the initial duration of the pilot project and in particular:
specify the scope of the pilot project,
indicate what alternative language competences they propose to apply,
describe which additional tools they propose to use to support communication in routine, degraded and emergency situations,
demonstrate how the alternative language competences and additional tools ensure at least an equivalent level of safety to full compliance with the requirements of paragraph 1, when integrated in their respective Safety Management Systems (1) ,
explain how they shall implement the pilot project in their Safety Management System, including training programs and documentation of the results, and
consult the representatives of the concerned staff in the process of preparing the application.
The applicants shall request the opinion of the concerned national safety authority/authorities that issued their single safety certificate(s) or safety authorisation(s), and of the European Union Agency for Railways, where it is the safety certification body ( ‘ the authorising entity or entities ’ ). Each authorising entity shall issue an opinion on whether the alternative means ensure at least an equivalent level of safety to full compliance with the requirements of paragraph 1, within 60 days from the day the last authorising entity concerned has received the request. In case several authorising entities are involved, they are encouraged to work together and ensure coordination.
The opinions shall assess in particular whether the following conditions are fulfilled:
the proposed alternative language competences and other tools for communication are sufficient to ensure effective communication between the concerned drivers and the staff of the infrastructure manager in routine, degraded and emergency situations.
the safety management systems of the applicants have been adapted to using alternative language competences and other tools for communication.
the applicants have provided evidence that these tools have been tested under operational conditions involving drivers fulfilling the language requirements of paragraph 2.
all concerned staff of the railway undertaking and infrastructure manager have received appropriate training through their safety management systems.
In the event of diverging opinions, the provisions of point (5) second subparagraph shall apply.
The applicants shall jointly submit to the Commission an application for derogation from paragraph 2, including the opinions of the authorising entity or entities and the detailed description of the pilot project on which the opinions are based. Alternatively, the participants in the project can designate a coordinator among them, who may submit the joint application on behalf of all participants in the project.
where the opinions of the authorising entity or entities are positive; and
where it is demonstrated that equal and non-discriminatory treatment of all applications as well as legal coherence at Union level is ensured.
In the event of diverging opinions, or a failure of one or more authorising entities to deliver an opinion within the prescribed time limit, the applicants may request the Commission to find a mutually acceptable solution, in cooperation with the parties involved. If no mutually acceptable solution can be found within 90 days after receiving a request for derogation, the pilot project shall be deemed to be refused. The Commission may request the opinion of the European Union Agency for Railways, and shall do so where the opinion of each authorising entity is negative.
In case of changes in the scope of the pilot projects, in particular the part of the network in which the project is carried out, the alternative language competences and the additional tools used for communication, the procedure described in point (4) shall apply.
Textual Amendments
[F1According to Article 9 of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May on railway safety.]
Textual Amendments
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: