- Latest available (Revised)
- Point in Time (31/01/2020)
- Original (As adopted by EU)
Directive 2009/3/EC of the European Parliament and of the Council of 11 March 2009 amending Council Directive 80/181/EEC on the approximation of the laws of the Member States relating to units of measurement (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Article 95 thereof,
Having regard to the proposal from the Commission,
Having regard to the opinion of the European Economic and Social Committee(1),
Acting in accordance with the procedure laid down in Article 251 of the Treaty(2),
Whereas:
(1) Council Directive 80/181/EEC(3) requires the United Kingdom and Ireland to fix a date for ending the exemptions, where they are still being applied, in respect of the units of measurement known as ‘pint’ for milk in returnable bottles and beer and cider on draught, ‘mile’ for road signs and speed indications, and ‘troy ounce’ for transactions in precious metals. However, experience has shown that, given the local character of those exemptions and the limited number of products concerned, maintaining the exemptions would not result in a non-tariff barrier to trade and, as a consequence, there is no longer a need to put an end to those exemptions.
(2) It is appropriate to clarify that the scope of Directive 80/181/EEC is consistent with the objectives referred to in Article 95 of the Treaty and that it is not limited to any specific Community fields of action.
(3) Directive 80/181/EEC authorises the use of supplementary indications in addition to the legal units laid down in Chapter I of the Annex to that Directive until 31 December 2009. However, in order to avoid creating obstacles for Community undertakings exporting to certain third countries that require products to be marked in other units than those laid down in Chapter I, it is appropriate to maintain the authorisation to use supplementary indications.
(4) Directive 80/181/EEC supports the smooth functioning of the internal market through the level of harmonisation of units of measurement it prescribes. In this context, it is appropriate that the Commission monitor market developments relating to that Directive and its implementation, notably as concerns possible obstacles to the functioning of the internal market and any further harmonisation required to overcome those obstacles.
(5) It is appropriate that the Commission continue to strongly pursue, in the context of its third country trade relations, including the Transatlantic Economic Council, the acceptance in third country markets of products labelled only in the units of the International System of Units (SI).
(6) Supplementary indications could also allow the gradual and smooth introduction of new metric units which may be developed at the international level.
(7) In 1995, the General Conference on Weights and Measures decided to eliminate the class of SI supplementary units as a separate class in the SI and to interpret the units ‘radian’ and ‘steradian’ as dimensionless SI derived units, the names and symbols of which may, but need not, be used in expressions for other SI derived units, as is convenient.
(8) In 1999, the General Conference on Weights and Measures adopted, within the framework of the SI, the ‘katal’, the symbol of which is ‘kat’, as the SI unit for catalytic activity. This new harmonised SI unit was intended to ensure a coherent and uniform indication of units of measurement in the fields of medicine and biochemistry and, as a consequence, to eliminate any risk of misunderstanding arising from the use of non-harmonised units.
(9) In 2007, in order to eliminate one of the major sources of the observed variability between different realisations of the water triple point, the General Conference on Weights and Measures adopted a note on the definition of the ‘kelvin’. The ‘kelvin’ is defined as a fraction of the thermodynamic temperature of the triple point of water. The note refers to water of a specific isotopic composition.
(10) Since the acre is no longer in use for land registration purposes in the United Kingdom and Ireland, there is no longer any need to provide for an exemption in that respect.
(11) In accordance with point 34 of the Interinstitutional Agreement on better law-making(4), Member States are encouraged to draw up, for themselves and in the interests of the Community, their own tables illustrating, as far as possible, the correlation between this Directive and the transposition measures, and to make them public.
(12) Directive 80/181/EEC should therefore be amended accordingly,
HAVE ADOPTED THIS DIRECTIVE:
Legislative Resolution of the European Parliament of 29 November 2007 (OJ C 297 E, 20.11.2008, p. 105), Council Common Position of 18 November 2008 (OJ C 330 E, 30.12.2008, p. 1) and Position of the European Parliament of 16 December 2008 (not yet published in the Official Journal).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: