CHAPTER III CONFORMITY OF TOYS
PARTICULAR SAFETY REQUIREMENTS
I. Physical and Mechanical Properties
2. Accessible edges, protrusions, cords, cables and fastenings on toys must...
5. Aquatic toys must be designed and manufactured so as to...
7. Toys conferring mobility on their users must, as far as...
8. The form and composition of projectiles and the kinetic energy...
11. Activity toys shall be manufactured so as to reduce the...
2. Toys that are themselves substances or mixtures must comply also...
3. Without prejudice to the restrictions referred to in the second...
4. By way of derogation from point 3, substances or mixtures...
5. By way of derogation from point 3, substances or mixtures...
8. Without prejudice to the application of points 3 and 4,...
9. The Commission shall systematically and regularly evaluate the occurrence of...
10. Cosmetic toys, such as play cosmetics for dolls, shall comply...
11. Toys shall not contain the following allergenic fragrances:
13. Without prejudice to points 3, 4 and 5, the following...
3. Electric toys must be designed and manufactured in such a...
4. Under foreseeable fault conditions, toys must provide protection against electrical...
5. Electric toys must provide adequate protection against fire hazards.
6. Electric toys must be designed and manufactured in such a...
7. Toys which have an electronic control system must be designed...
CLASSIFICATION OF SUBSTANCES AND MIXTURES
1. Criteria for classifying substances and mixtures for the purposes of...
2. Community legal acts governing the use of certain substances for...
3. Categories of substances and mixtures classified as carcinogenic, mutagenic or...
4. Categories of substances and mixtures classified as carcinogenic, mutagenic or...
5. Categories of substances and mixtures classified as carcinogenic, mutagenic or...
2. Name and address of the manufacturer or his authorised representative:...
3. This declaration of conformity is issued under the sole responsibility...
4. Object of the declaration (identification of toy allowing traceability). It...
6. References to the relevant harmonised standards used, or references to...
7. Where applicable: the notified body … (name, number) … performed...