F1ANNEX I
F11.DIMENSIONS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.1.Mopeds and light quadricycles without a body
F11.1.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.1.2.Height: 175 mm;
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.1.3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.1.4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.2.Motorcycles, tricycles up to a maximum power of 15 kW and quadricycles, other than light quadricycles, without a body
F11.2.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.2.2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.3.Tricycles with a maximum power exceeding 15 kW, light quadricycles fitted with a body and quadricycles, other than light quadricycles, fitted with a body
F11.3.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F12.GENERAL LOCATION
F12.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F12.1.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F13.INCLINATION
F13.1.The rear registration plate:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F14.MAXIMUM HEIGHT
F14.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F15.MINIMUM HEIGHT
F15.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F16.GEOMETRIC VISIBILITY
F16.1.The space for mounting the plate must be visible within a space bordered by two dihedrals: one with a horizontal edge defined by two planes passing through the upper and lower horizontal edges of the space for mounting the plate, the angles of which in relation to the horizontal are shown in Figure 1; the other with a perceptibly vertical edge defined by two planes passing through each side of the plate, the angles of which in relation to the median longitudinal plane of the vehicle are shown in Figure 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F1Information document in respect of the space for mounting the rear registration plate of a type of two or three-wheel motor vehicle(to be attached to the application for EC component type-approval where this is submitted separately from the application for EC vehicle type-approval)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F1EC component type-approval certificate in respect of the space for mounting the rear registration plate of a type of two or three-wheel motor vehicleMODEL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F11.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F12.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F13.Manufacturer’s name and address …
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F14.Name and address of manufacturer’s representative (if any) …
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F15.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F16.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F17.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F18.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F19.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repealed by Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles Text with EEA relevance.