ANNEX

^a For the implementation of the common principles of Annex VI, the content and conclusions of assessment reports are available on the Commission website: http://ec.europa.eu/comm/environment/biocides/index.htm
No	Common Name	IUPAC NameIdentification Numbers	Minimum purity of the active substance in the biocidal product as placed on the market	Date of inclusion	Deadline for compliance with Article 16(3)(except for products containing more than one active substance, for which the deadline to comply with Article 16(3) shall be the one set out in the last of the inclusion decisions relating to its active substances)	Expiry date of inclusion	Product type	Specific provisions^a
‘24	disodium tetraborate	disodium tetraborate EC No: 215-540-4 CAS No (anhydrous): 1330-43-4 CAS No (pentahydrate): 12267-73-1 CAS No (decahydrate): 1303-96-4	990 g/kg	1 September 2011	31 August 2013	31 August 2021	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: 1. Products authorised for industrial and professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. 2. In view of the risks identified for the soil and aquatic compartments, products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.’

For the implementation of the common principles of Annex VI, the content and conclusions of assessment reports are available on the Commission website: http://ec.europa.eu/comm/environment/biocides/index.htm

Common Name

IUPAC NameIdentification Numbers

Minimum purity of the active substance in the biocidal product as placed on the market

Date of inclusion

Deadline for compliance with Article 16(3)(except for products containing more than one active substance, for which the deadline to comply with Article 16(3) shall be the one set out in the last of the inclusion decisions relating to its active substances)

Expiry date of inclusion

Product type

Specific provisions^a

‘24

disodium tetraborate

EC No: 215-540-4

CAS No (anhydrous): 1330-43-4

CAS No (pentahydrate): 12267-73-1

CAS No (decahydrate): 1303-96-4

990 g/kg

1 September 2011

31 August 2013

31 August 2021

When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment.

When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks.

Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels.

Member States shall ensure that authorisations are subject to the following conditions:

Products authorised for industrial and professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means.

In view of the risks identified for the soil and aquatic compartments, products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.’