Directive 2010/75/EU of the European Parliament and of the CouncilShow full title

3. Special provisions for combustion plants co-incinerating waste U.K.

3.1. C_proc expressed as daily average values (mg/Nm³) valid until the date set out in Article 82(5) U.K.

For determining the total rated thermal input of the combustion plants, the aggregation rules as defined in Article 29 shall apply. Half-hourly average values shall only be needed in view of calculating the daily average values.

C_proc for solid fuels with the exception of biomass (O₂ content 6 %):

Polluting substances	< 50 MWth	50-100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	850	200	200
NOx	—	400	200	200
Dust	50	50	30	30

C_proc for biomass (O₂ content 6 %):

Polluting substances	< 50 MWth	50 to 100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	200	200	200
NOx	—	350	300	200
Dust	50	50	30	30

C_proc for liquid fuels (O₂ content 3 %):

Polluting substances	< 50 MWth	50 to 100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	850	400 to 200 (linear decrease from 100 to 300 MWth)	200
NOx	—	400	200	200
Dust	50	50	30	30

3.2.

C_proc expressed as daily average values (mg/Nm³) valid from the date set out in Article 82(6) U.K.

For determining the total rated thermal input of the combustion plants, the aggregation rules as defined in Article 29 shall apply. Half-hourly average values shall only be needed in view of calculating the daily average values.

3.2.1. C_proc for combustion plants referred to in Article 30(2), with the exception of gas turbines and gas engines U.K.

C_proc for solid fuels with the exception of biomass (O₂ content 6 %):

Polluting substance	< 50 MWth	50-100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	400 for peat: 300	200	200
NOx	—	300 for pulverised lignite: 400	200	200
Dust	50	30	25 for peat: 20	20

C_proc for biomass (O₂ content 6 %):

Polluting substance	< 50 MWth	50 to 100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	200	200	200
NOx	—	300	250	200
Dust	50	30	20	20

C_proc for liquid fuels (O₂ content 3 %):

Polluting substance	< 50 MWth	50 to 100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	350	250	200
NOx	—	400	200	150
Dust	50	30	25	20

3.2.2. C_proc for combustion plants referred to in Article 30(3), with the exception of gas turbines and gas engines U.K.

C_proc for solid fuels with the exception of biomass (O₂ content 6 %):

Polluting substance	< 50 MWth	50-100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	400 for peat: 300	200 for peat: 300, except in the case of fluidised bed combustion: 250	150 for circulating or pressurised fluidised bed combustion or, in case of peat firing, for all fluidised bed combustion: 200
NOx	—	300 for peat: 250	200	150 for pulverised lignite combustion: 200
Dust	50	20	20	10 for peat: 20

C_proc for biomass (O₂ content 6 %):

Polluting substance	< 50 MWth	50 to 100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	200	200	150
NOx	—	250	200	150
Dust	50	20	20	20

C_proc for liquid fuels (O₂ content 3 %):

Polluting substance	< 50 MWth	50 to 100 MWth	100 to 300 MWth	> 300 MWth
SO2	—	350	200	150
NOx	—	300	150	100
Dust	50	20	20	10

3.3. C — total emission limit values for heavy metals (mg/Nm³) expressed as average values over the sampling period of a minimum of 30 minutes and a maximum of 8 hours (O₂ content 6 % for solid fuels and 3 % for liquid fuels) U.K.

Polluting substances	C
Cd + Tl	0,05
Hg	0,05
Sb + As + Pb + Cr + Co + Cu + Mn + Ni + V	0,5

3.4. C — total emission limit value (ng/Nm³) for dioxins and furans expressed as average value measured over the sampling period of a minimum of 6 hours and a maximum of 8 hours (O₂ content 6 % for solid fuels and 3 % for liquid fuels) U.K.

Polluting substance	C
Dioxins and furans	0,1