1.The permit shall include the following:
(a)a list of all types of waste which may be treated using at least the types of waste set out in the European Waste List established by Decision 2000/532/EC, if possible, and containing information on the quantity of each type of waste, where appropriate;
(b)the total waste incinerating or co-incinerating capacity of the plant;
(c)the limit values for emissions into air and water;
(d)the requirements for the pH, temperature and flow of waste water discharges;
(e)the sampling and measurement procedures and frequencies to be used to comply with the conditions set for emission monitoring;
(f)the maximum permissible period of any technically unavoidable stoppages, disturbances, or failures of the purification devices or the measurement devices, during which the emissions into the air and the discharges of waste water may exceed the prescribed emission limit values.
2.In addition to the requirements set out in paragraph 1, the permit granted to a waste incineration plant or waste co-incineration plant using hazardous waste shall include the following:
(a)a list of the quantities of the different categories of hazardous waste which may be treated;
(b)the minimum and maximum mass flows of those hazardous wastes, their lowest and maximum calorific values and their maximum contents of polychlorinated biphenyls, pentachlorophenol, chlorine, fluorine, sulphur, heavy metals and other polluting substances.
3.Member States may list the categories of waste to be included in the permit which can be co-incinerated in certain categories of waste co-incineration plants.
4.The competent authority shall periodically reconsider and, where necessary, update permit conditions.