Article 5.Adaptation of the Annexes to scientific and technical progress
Article 6.Review and amendment of list of restricted substances in Annex II
Article 11.Cases in which obligations of manufacturers apply to importers and distributors
Article 18.Market surveillance and controls of EEE entering the Union market
Equipment utilising or detecting ionising radiation
1. Lead, cadmium and mercury in detectors for ionising radiation.
3. Lead in electromagnetic radiation amplification devices: micro-channel plate and capillary...
4. Lead in glass frit of X-ray tubes and image intensifiers...
8. Radioactive cadmium isotope source for portable X-ray fluorescence spectrometers.
10. Lead and cadmium in atomic absorption spectroscopy lamps.
11. Lead in alloys as a superconductor and thermal conductor in...
12. Lead and cadmium in metallic bonds creating superconducting magnetic circuits...
14. Lead in single crystal piezoelectric materials for ultrasonic transducers.
16. Mercury in very high accuracy capacitance and loss measurement bridges...
18. Lead in solders of high performance infrared imaging modules to...
21. Cadmium in phosphor coatings in image intensifiers for X-ray images...
22. Lead acetate marker for use in stereotactic head frames for...
23. Lead as an alloying element for bearings and wear surfaces...
24. Lead enabling vacuum tight connections between aluminium and steel in...
25. Lead in the surface coatings of pin connector systems requiring...
28. Lead in solders for mounting cadmium telluride and cadmium zinc...
29. Lead in alloys, as a superconductor or thermal conductor, used...
30. Hexavalent chromium in alkali dispensers used to create photocathodes in...
31. Lead, cadmium and hexavalent chromium in reused spare parts, recovered...
32. Lead in solders on printed circuit boards of detectors and...
33. Lead in solders on populated printed circuit boards used in...
34. Lead as an activator in the fluorescent powder of discharge...
Applications for granting, renewing and revoking exemptions as referred to in Article 5
2. Name and address of the manufacturer or his authorised representative:...
3. This declaration of conformity is issued under the sole responsibility...
4. Object of the declaration (identification of EEE allowing traceability. It...
5. The object of the declaration described above is in conformity...
6. Where applicable, references to the relevant harmonised standards used or...