Directive 2012/27/EU of the European Parliament and of the CouncilShow full title

ANNEX V U.K. Common methods and principles for calculating the impact of energy efficiency obligations schemes or other policy measures under Article 7(1), (2) and (9) and Article 20(6)

1. Methods for calculating energy savings for the purposes of Article 7(1) and (2), and points (b), (c), (d), (e) and (f) of the second subparagraph of Article 7(9), and Article 20(6). U.K.

Obligated, participating or entrusted parties, or implementing public authorities may use one or more of the following methods for calculating energy savings:

(a)

deemed savings, by reference to the results of previous independently monitored energy improvements in similar installations. The generic approach is termed ‘ex-ante’;

(b)

metered savings, whereby the savings from the installation of a measure, or package of measures, is determined by recording the actual reduction in energy use, taking due account of factors such as additionality, occupancy, production levels and the weather which may affect consumption. The generic approach is termed ‘ex-post’;

(c)

scaled savings, whereby engineering estimates of savings are used. This approach may only be used where establishing robust measured data for a specific installation is difficult or disproportionately expensive, e.g. replacing a compressor or electric motor with a different kWh rating than that for which independent information on savings has been measured, or where they are carried out on the basis of nationally established methodologies and benchmarks by qualified or accredited experts that are independent of the obligated, participating or entrusted parties involved;

(d)

surveyed savings, where consumers’ response to advice, information campaigns, labelling or certification schemes, or smart metering is determined. This approach may only be used for savings resulting from changes in consumer behaviour. It may not be used for savings resulting from the installation of physical measures.

2. In determining the energy saving for an energy efficiency measure for the purposes of Article 7(1) and (2), and points (b), (c), (d), (e) and (f) of the second subparagraph of Article 7(9), and Article 20(6) the following principles shall apply: U.K.

(a)

credit may only be given for savings exceeding the following levels:

(i)

Union emission performance standards for new passenger cars and new light commercial vehicles following the implementation of Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emission performance standards for new passenger cars as part of the Community’s integrated approach to reduce CO₂ emissions from light-duty vehicles(1) and Regulation (EU) No 510/2011 of the European Parliament and of the Council of 11 May 2011 setting emission performance standards for new light commercial vehicles as part of the Union’s integrated approach to reduce CO₂ emissions from light-duty vehicles(2), respectively;

(ii)

Union requirements relating to the removal from the market of certain energy related products following the implementation of implementing measures under Directive 2009/125/EC; and

(b)

to account for climatic variations between regions, Member States may choose to adjust the savings to a standard value or to accord different energy savings in accordance with the temperature variations between regions;

(c)

the activities of the obligated, participating or entrusted party must be demonstrably material to the achievement of the claimed savings;

(d)

savings from an individual action may not be claimed by more than one party;

(e)

calculation of energy savings shall take into account the lifetime of savings. This may be done by counting the savings each individual action will achieve between its implementation date and 31 December 2020. Alternatively, Member States may adopt another method that is estimated to achieve at least the same total quantity of savings. When using other methods, Member States shall ensure that the total amount of energy savings calculated with these other methods does not exceed the amount of energy savings that would have been the result of their calculation when counting the savings each individual action will achieve between its implementation date and 31 December 2020. Member States shall describe in detail in their first National Energy Efficiency Action Plan according to Annex XIV to this Directive, which other methods they have used and which provisions have been made to ensure this binding calculation requirement; and

(f)

actions by obligated, participating or entrusted parties, either individually or together, which aim to result in lasting transformation of products, equipment, or markets to a higher level of energy efficiency are permitted; and

(g)

in promoting the uptake of energy efficiency measures, Member States shall ensure that quality standards for products, services and installation of measures are maintained. Where such standards do not exist, Member States shall work with obligated, participating or entrusted parties to introduce them.

3. In determining the energy saving from policy measures applied under point (a) of the second subparagraph of Article 7(9), the following principles shall apply: U.K.

(a)

credit shall only be given for energy savings from taxation measures exceeding the minimum levels of taxation applicable to fuels as required in Council Directive 2003/96/EC of 27 October 2003 restructuring the Community framework for the taxation of energy products and electricity(3) or in Council Directive 2006/112/EC of 28 November 2006 on the common system of value added tax(4);

(b)

recent and representative official data on price elasticities shall be used for calculation of the impact; and

(c)

the energy savings from accompanying taxation policy instruments, including fiscal incentives or payment to a fund, shall be accounted separately.

4. Notification of methodology U.K.

Member States shall by 5 December 2013 notify the Commission of their proposed detailed methodology for operation of the energy efficiency obligation schemes and for the purposes of Article 7(9) and Article 20(6). Except in the case of taxes, such notification shall include details of:

(a)

obligated, participating or entrusted parties, or implementing public authorities;

(b)

target sectors;

(c)

the level of the energy saving target or expected savings to be achieved over the whole and intermediate periods;

(d)

the duration of the obligation period and intermediate periods;

(e)

eligible measure categories;

(f)

calculation methodology, including how additionality and materiality are to be determined and which methodologies and benchmarks are used for engineering estimates;

(g)

lifetimes of measures;

(h)

approach taken to address climatic variations within the Member State;

(i)

quality standards;

(j)

monitoring and verification protocols and how the independence of these from the obligated, participating or entrusted parties is ensured;

(k)

audit protocols; and

(l)

how the need to fulfil the requirement in the second subparagraph of Article 7(1) is taken into account.

In the case of taxes, the notification shall include details of:

(a)

target sectors and segment of taxpayers;

(b)

implementing public authority;

(c)

expected savings to be achieved;

(d)

duration of the taxation measure and intermediate periods; and

(e)

calculation methodology, including which price elasticities are used.

(1)

OJ L 140, 5.6.2009, p. 1.

(2)

OJ L 145, 31.5.2011, p. 1.

(3)

OJ L 283, 31.10.2003, p. 51.

(4)

OJ L 347, 11.12.2006, p. 1.