In Annex I to Directive 98/8/EC, the following entry is added:
| a The purity indicated in this column was the minimum degree of purity of the active substance used for the evaluation made in accordance with Article 11. The active substance in the product placed on the market can be of equal or different purity if it has been proven technically equivalent with the evaluated substance. | ||||||||
| b For products containing more than one active substance covered by Article 16(2), the deadline for compliance with Article 16(3) is that of the last of its active substances to be included in this Annex. For products for which the first authorisation has been granted later than 120 days before the deadline for compliance with Article 16(3) and a complete application has been submitted for mutual recognition in accordance with Article 4(1) within 60 days of the granting of the first authorisation, the deadline for compliance with Article 16(3) in relation to that application is extended to 120 days after the date of reception of the complete application for mutual recognition. For products for which a Member State has proposed to derogate from mutual recognition in accordance with Article 4(4), the deadline for compliance with Article 16(3) is extended to 30 days after the date of the Commission Decision adopted in accordance with the second subparagraph of Article 4(4). | ||||||||
| c For the implementation of the common principles of Annex VI, the content and conclusions of assessment reports are available on the Commission website: http://ec.europa.eu/comm/environment/biocides/index.htm | ||||||||
| No | Common Name | IUPAC NameIdentification Numbers | Minimum degree of purity of the active substancea | Date of inclusion | Deadline for compliance with Article 16(3), unless one of the exceptions indicated in the footnote to this heading appliesb | Expiry date of inclusion | Product type | Specific provisionsc |
|---|---|---|---|---|---|---|---|---|
| ‘64 | Alkyl (C12-16) dimethylbenzyl ammonium chloride; C12-16-ADBAC | IUPAC name: Not applicable EC No: 270-325-2 CAS No: 68424-85-1 | Dry weight: 940 g/kg | 1 February 2015 | 31 January 2017 | 31 January 2025 | 8 | The Union level risk assessment did not address all potential uses and exposure scenarios; certain uses and exposure scenarios, such as use by non-professionals and exposure of food or feed, were excluded. When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: (1) For industrial or professional users safe operational procedures shall be established, and products shall be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks can be reduced to an acceptable level by other means. (2) Products shall not be used for treatment of wood with which children may enter in direct contact, unless it can be demonstrated in the application for product authorisation that risks can be reduced to an acceptable level. (3) Labels and, where provided, safety data sheets of products authorised shall indicate that industrial or professional application shall be conducted within a contained area or on impermeable hard standing with bunding, and that freshly treated timber shall be stored after treatment on impermeable hard standing to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal. (4) Products shall not be authorised for treatment of wood that will be in contact with fresh water or used for outdoor constructions near or above water, continually exposed to the weather or subject to frequentwetting, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate mitigation measures.’ |