xmlns:atom="http://www.w3.org/2005/Atom"
1. As a minimum, the following information and properties, where appropriate,...
2. Each explosive shall be tested under realistic conditions. If this...
3. Requirements for the groups of explosives
3.1. Blasting explosives shall also comply with the following requirements:
3.2. Detonating cords, safety fuses, other fuses and shock tubes shall...
3.3. Detonators (including delay detonators) and relays shall also comply with...
3.4. Propellants and rocket propellants shall also comply with the following...
CONFORMITY ASSESSMENT PROCEDURES
1. EU-type examination is the part of a conformity assessment procedure...
2. EU-type examination shall be carried out as an assessment of...
3. The manufacturer shall lodge an application for EU-type examination with...
4.1. examine the technical documentation and supporting evidence to assess the...
4.2. verify that the specimen(s) have been manufactured in conformity with...
4.3. carry out appropriate examinations and tests, or have them carried...
4.4. carry out appropriate examinations and tests, or have them carried...
4.5. agree with the manufacturer on a location where the examinations...
5. The notified body shall draw up an evaluation report that...
6. Where the type meets the requirements of this Directive that...
7. The notified body shall keep itself apprised of any changes...
8. Each notified body shall inform its notifying authority concerning the...
9. The manufacturer shall keep a copy of the EU-type examination...
10. The manufacturer’s authorised representative may lodge the application referred to...
MODULE C 2 Conformity to type based on internal production control plus supervised...
MODULE D Conformity to type based on quality assurance of the production...
1. Conformity to type based on quality assurance of the production...
3.1. The manufacturer shall lodge an application for assessment of his...
3.2. The quality system shall ensure that the explosives are in...
3.3. The notified body shall assess the quality system to determine...
3.4. The manufacturer shall undertake to fulfil the obligations arising out...
3.5. The manufacturer shall keep the notified body that has approved...
4. Surveillance under the responsibility of the notified body
6. The manufacturer shall, for a period ending 10 years after...
7. Each notified body shall inform its notifying authority of quality...
MODULE E Conformity to type based on product quality assurance
1. Conformity to type based on product quality assurance is that...
3.1. The manufacturer shall lodge an application for assessment of his...
3.2. The quality system shall ensure compliance of the explosives with...
3.3. The notified body shall assess the quality system to determine...
3.4. The manufacturer shall undertake to fulfil the obligations arising out...
3.5. The manufacturer shall keep the notified body that has approved...
4. Surveillance under the responsibility of the notified body
6. The manufacturer shall, for a period ending 10 years after...
7. Each notified body shall inform its notifying authority of quality...
EU DECLARATION OF CONFORMITY (No XXXX)
2. Name and address of the manufacturer and, where applicable, his...
3. This declaration of conformity is issued under the sole responsibility...
4. Object of the declaration (identification of product allowing traceability):
5. The object of the declaration described above is in conformity...
6. References to the relevant harmonised standards used or references to...
7. The notified body … (name, number) performed … (description of...
ATTACHMENTS