CHAPTER III CONFORMITY OF LIFTS AND SAFETY COMPONENTS FOR LIFTS
Article 37.Union market surveillance and control of lifts or safety components for lifts entering the Union market
Article 38.Procedure for dealing with lifts or safety components for lifts presenting a risk at national level
Article 40.Compliant lifts or safety components for lifts which present a risk
CHAPTER VI COMMITTEE PROCEDURE, TRANSITIONAL AND FINAL PROVISIONS
ESSENTIAL HEALTH AND SAFETY REQUIREMENTS
1. Obligations under essential health and safety requirements apply only where...
2. The essential health and safety requirements contained in the Directive...
3. The manufacturer and the installer are under an obligation to...
4.2. Landing doors, where they have to contribute to the protection...
4.3. Counterweights must be so installed as to avoid any risk...
4.4. Lifts must be equipped with means enabling people trapped in...
4.5. Cars must be fitted with two-way means of communication allowing...
4.6. Lifts must be so designed and constructed that, in the...
4.7. Cars must be designed and constructed to ensure sufficient ventilation...
4.9. The means of communication referred to in point 4.5 and...
EU-TYPE EXAMINATION FOR LIFTS AND SAFETY COMPONENTS FOR LIFTS (module B)
A. EU-type examination of safety components for lifts
1. EU-type examination is the part of a conformity assessment procedure...
2. The application for EU-type examination shall be lodged by the...
3. The technical documentation shall make it possible to assess whether...
5. Where the type of the safety component for lifts meets...
6. The notified body shall keep itself apprised of any changes...
7. The manufacturer shall inform the notified body that holds the...
8. Each notified body shall inform its notifying authority concerning the...
9. The Commission, the Member States and the other notified bodies...
10. The manufacturer shall keep with the technical documentation a copy...
B. EU-type examination of lifts
1. EU-type examination of lifts is the part of a conformity...
2. The application for EU-type examination shall be lodged by the...
3. The technical documentation shall make it possible to assess the...
5. The notified body shall draw up an evaluation report that...
6. Where the type meets the essential health and safety requirements...
7. The notified body shall keep itself apprised of any changes...
8. The installer shall inform the notified body of any modifications...
9. Each notified body shall inform its notifying authority concerning the...
10. The Commission, the Member States and the other notified bodies...
11. The installer shall keep with the technical documentation a copy...
CONFORMITY TO TYPE BASED ON PRODUCT QUALITY ASSURANCE FOR SAFETY COMPONENTS FOR LIFTS (module E)
1. Conformity to type based on product quality assurance for safety...
3.1. The manufacturer shall lodge an application for assessment of his...
3.2. Under the quality system, each safety component for lifts shall...
3.3. The notified body shall assess the quality system to determine...
3.4. The manufacturer shall undertake to fulfil the obligations arising from...
3.5. The manufacturer or his authorised representative shall keep the notified...
4. Surveillance under the responsibility of the notified body
6. The manufacturer shall for a period ending 10 years after...
7. Each notified body shall inform its notifying authority of quality...
CONFORMITY BASED ON FULL QUALITY ASSURANCE FOR SAFETY COMPONENTS FOR LIFTS (module H)
1. Conformity based on full quality assurance for safety components for...
3.1. The manufacturer shall lodge an application for assessment of his...
3.2. The quality system shall ensure compliance of the safety components...
3.3. The notified body shall assess the quality system to determine...
3.4. The manufacturer shall undertake to fulfil the obligations arising from...
3.5. The manufacturer shall keep the notified body which has approved...
4. Surveillance under the responsibility of the notified body
6. The manufacturer shall, for a period ending 10 years after...
7. Each notified body shall inform its notifying authority of quality...
CONFORMITY TO TYPE BASED ON PRODUCT QUALITY ASSURANCE FOR LIFTS (module E)
1. Conformity to type based on product quality assurance is the...
3.1. The installer shall lodge an application for assessment of his...
3.2. Under the quality system, each lift shall be examined and...
3.3. The notified body shall assess the quality system to determine...
3.4. The installer shall undertake to fulfil the obligations arising from...
3.4.1. The installer shall keep the notified body which has approved...
3.4.2. The notified body shall assess the modifications proposed and decide...
4. Surveillance under the responsibility of the notified body
6. Each notified body shall inform its notifying authority of quality...
CONFORMITY BASED ON FULL QUALITY ASSURANCE PLUS DESIGN EXAMINATION FOR LIFTS (module H1)
1. Conformity based on full quality assurance plus design examination for...
3.1. The installer shall lodge an application for assessment of his...
3.2. The quality system shall ensure compliance of the lifts with...
3.5. The installer shall undertake to fulfil the obligations arising from...
4. Surveillance under the responsibility of the notified body
5. The installer shall, keep at the disposal of the national...
6. Each notified body shall inform its notifying authority of full...
CONFORMITY TO TYPE BASED ON PRODUCTION QUALITY ASSURANCE FOR LIFTS (module D)
1. Conformity to type based on production quality assurance for lifts...
3.1. The installer shall lodge an application for assessment of his...
3.2. The quality system shall ensure compliance of the lifts with...
3.3. The notified body shall assess the quality system to determine...
3.4. The installer shall undertake to fulfil the obligations arising from...
3.4.1. The installer shall keep the notified body that has approved...
3.4.2. The notified body shall assess the modifications proposed and decide...
4. Surveillance under the responsibility of the notified body
5. The installer shall, keep at the disposal of the national...
6. Each notified body shall inform its notifying authority of quality...
ATTACHMENTS