Article 11Electronic tag
1.In order to facilitate market surveillance and prevent the counterfeiting of specific items of marine equipment referred to in paragraph 3, manufacturers may use an appropriate and reliable form of electronic tag instead of, or in addition to, the wheel mark. In such a case, Articles 9 and 10 shall apply, as appropriate, mutatis mutandis.
2.The Commission shall carry out a cost-benefit analysis concerning the use of the electronic tag as a supplement to, or a replacement of, the wheel mark.
3.The Commission may adopt delegated acts, in accordance with Article 37, in order to identify the specific items of marine equipment which can benefit from electronic tagging. It is of particular importance that the Commission carry out consultations with experts, including Member States’ experts, during the preparation of such delegated acts.
4.Implementing powers shall be conferred upon the Commission in order to lay down, in the form of Commission Regulations and in accordance with the examination procedure referred to in Article 38(2), appropriate technical criteria as regards the design, performance, affixing and use of electronic tags.
5.For the equipment identified in accordance with paragraph 3, the wheel mark may, within three years after the date of adoption of the appropriate technical criteria referred to in paragraph 4, be supplemented by an appropriate and reliable form of electronic tag.
6.For the equipment identified in accordance with paragraph 3, the wheel mark may be replaced, five years after the date of adoption of the appropriate technical criteria referred to in paragraph 4, by an appropriate and reliable form of electronic tag.