Directive (EU) 2015/2193 of the European Parliament and of the Council of 25 November 2015 on the limitation of emissions of certain pollutants into the air from medium combustion plants (Text with EEA relevance) (c. 2193)

1. Introductory Text

2. Article 1. Subject matter

3. Article 2. Scope

4. Article 3. Definitions

5. Article 4. Aggregation

6. Article 5. Permits and registration

7. Article 6. Emission limit values

8. Article 7. Obligations of the operator

9. Article 8. Compliance check

10. Article 9. Changes to medium combustion plants

11. Article 10. Competent authorities

12. Article 11. Reporting

13. Article 12. Review

14. Article 13. Amendment of Annexes

15. Article 14. Exercise of the delegation

16. Article 15. Committee procedure

17. Article 16. Penalties

18. Article 17. Transposition

19. Article 18. Entry into force

20. Article 19. Addressees

21. Signature

22. 1. ANNEX I

       INFORMATION TO BE PROVIDED BY THE OPERATOR TO THE COMPETENT AUTHORITY

       1. Rated thermal input (MW) of the medium combustion plant; Type...

    2. ANNEX II

       EMISSION LIMIT VALUES REFERRED TO IN ARTICLE 6

       1. All emission limit values set out in this Annex are...

       2. PART 1 Emission limit values for existing medium combustion plants

       3. PART 2 Emission limit values for new medium combustion plants

    3. ANNEX III

       MONITORING OF EMISSIONS AND ASSESSMENT OF COMPLIANCE

       1. PART 1 Monitoring of emissions by the operator

          1. 1. Periodic measurements shall be required at least:

          2. 2. As an alternative to the frequencies referred to in point 1,...

          3. 3. Measurements shall be required only for:

          4. 4. The first measurements shall be carried out within four months...

          5. 5. As an alternative to the measurements referred to in points 1,...

          6. 6. As an alternative to the periodic measurements referred to in...

          7. 7. Sampling and analysis of polluting substances and measurements of process...

       2. PART 2 Assessment of compliance

          1. 1. In the case of periodic measurements, the emission limit values...

          2. 2. In the case of continuous measurements, compliance with the emission...

          3. 3. For the purpose of the calculation of the average emission...