Search Legislation

Council Directive (EU) 2015/652Show full title

Council Directive (EU) 2015/652 of 20 April 2015 laying down calculation methods and reporting requirements pursuant to Directive 98/70/EC of the European Parliament and of the Council relating to the quality of petrol and diesel fuels

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.

Council Directive (EU) 2015/652

of 20 April 2015

laying down calculation methods and reporting requirements pursuant to Directive 98/70/EC of the European Parliament and of the Council relating to the quality of petrol and diesel fuels

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 98/70/EC of the European Parliament and of the Council of 13 October 1998 relating to the quality of petrol and diesel fuels and amending Council Directive 93/12/EEC(1), and in particular Article 7a(5) thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) The method for calculating greenhouse gas emissions of fuels and other energy from non-biological sources to be established pursuant to Article 7a(5) of Directive 98/70/EC should yield reporting of sufficient accuracy, so that the Commission can critically assess the performance of suppliers in meeting their obligations under Article 7a(2) of that Directive. The calculation method should ensure accuracy, while having due regard for the complexity of the associated administrative requirements. At the same time, it should incentivise suppliers to reduce the greenhouse gas intensity of the fuel they supply. Careful consideration should also be given to the impact of the calculation method on refineries in the Union. Hence, the calculation method should be based on average greenhouse gas intensities that represent an industry average value which is typical for a particular fuel. This would have the advantage of reducing the administrative burden on suppliers and Member States. At this stage, the proposed calculation method should not require differentiation of the greenhouse gas intensity of fuel on the basis of the source of the raw material, as this would affect current investments in certain refineries in the Union.

(2) Reporting requirements for suppliers which are small and medium-sized enterprises (SMEs) as defined in Commission Recommendation 2003/361/EC(2) should be minimised as far as possible in the context of Article 7a(1) of Directive 98/70/EC. Similarly, importers of petrol and diesel refined outside the Union should not be obliged to provide detailed information about the sources of the crude oils used to make those fuels, as this information may not be available or may be difficult to obtain.

(3) In order to incentivise further greenhouse gas emission reductions, savings claimed from upstream emission reductions (UERs), including from flaring and venting, should be included in the calculation of suppliers' life cycle greenhouse gas emissions. In order to facilitate the claiming of UERs by suppliers, the use of various emission schemes should be allowed for calculating and certifying emission reductions. Only UER projects which start after the date of the establishment of the fuel baseline standard set out in Article 7a(5)(b) of Directive 98/70/EC, i.e. 1 January 2011, should be eligible.

(4) Weighted average greenhouse gas default values representing the crude oils consumed in the Union provide a simple calculation method by which suppliers may determine the greenhouse gas content of the fuel they supply.

(5) UERs should be estimated and validated in accordance with principles and standards identified in International Standards, and in particular ISO 14064, ISO 14065 and ISO 14066.

(6) It is furthermore appropriate to facilitate the implementation by Member States of legislation on UERs, including from flaring and venting. To this end, non-legislative guidance should be prepared under the auspices of the Commission on approaches to quantify, verify, validate, monitor and report such UERs (including reductions in flaring and venting at production sites) prior to the end of the transposition period set in Article 7 of this Directive.

(7) Article7a(5)(b) of Directive 98/70/EC requires the establishment of a method to determine the fuel baseline standard based on the life cycle greenhouse gas emissions per unit of energy from fossil fuels in 2010. The fuel baseline standard should be based on the quantities of diesel, petrol, non-road gas oil, liquefied petroleum gas (LPG) and compressed natural gas (CNG) consumed using data officially reported by the Member States to the United Nations Framework Convention on Climate Change (UNFCCC) in 2010. The fuel baseline standard should not be the fossil fuel comparator that is used for calculating greenhouse gas savings from biofuels, which should remain as set out in Annex IV to Directive 98/70/EC.

(8) Since the composition of the relevant fossil fuel mix changes little from year to year, the aggregate variation in the greenhouse gas intensity of the fossil fuels from year to year will also be small. It is therefore appropriate that the fuel baseline standard be based on the 2010 Union average consumption data as reported by the Member States to the UNFCCC.

(9) The fuel baseline standard should represent an average upstream greenhouse gas intensity and the intensity of the fuel of a refinery of average complexity for fossil fuels. Hence, the fuel baseline standard should be calculated using the respective average fuel default values. The fuel baseline standard should remain unchanged for the period up until 2020, in order to provide regulatory certainty to suppliers in respect of their obligations to reduce the greenhouse gas intensity of the fuels they supply.

(10) Article 7a(5)(d) of Directive 98/70/EC provides for the adoption of a method to calculate the contribution of electric road vehicles to reduce life cycle greenhouse gas emissions. Pursuant to that Article, the calculation method should be compatible with Article 3(4) of Directive 2009/28/EC of the European Parliament and of the Council(3). To ensure this compatibility, the same adjustment factor should be used for the powertrain efficiency.

(11) Electricity supplied for use in road transport may be reported by suppliers, as laid down in Article 7a(1) of Directive 98/70/EC, as part of their annual reports to the Member States. In order to limit administrative costs, it is appropriate that the calculation method be based on an estimate rather than on an actual measurement of the consumption of electricity in an electric road vehicle or motorcycle for the purpose of supplier reporting.

(12) It is appropriate to include a detailed approach for estimating the quantity and the greenhouse gas intensity of biofuels in cases where processing of a biofuel and a fossil fuel occurs during the same process. A specific method is needed because the resulting quantity of the biofuel is not measurable, such as during co-hydro treatment of vegetable oils with a fossil fuel. Article 7d(1) of Directive 98/70/EC stipulates that the life cycle greenhouse gas emissions of biofuels are, for the purposes of Article 7a and Article 7b(2) of that Directive, to be calculated with the same method. Therefore, the certification of greenhouse gas emissions by recognised voluntary schemes is as valid for the purposes of Article 7a as it is for the purposes of Article 7b(2) of Directive 98/70/EC.

(13) The supplier reporting requirement laid down in Article 7a(1) of Directive 98/70/EC should be supplemented by a harmonised format and harmonised definitions of the data to be reported. A harmonisation of the definitions of data is needed for the proper execution of the greenhouse gas intensity calculation linked to an individual supplier's reporting obligations, as the data form key inputs into the calculation method harmonised pursuant to Article 7a(5)(a) of Directive 98/70/EC. These data include the supplier's identification, the quantity of fuel or energy placed on the market and the fuel or energy type placed on the market.

(14) The supplier reporting requirement laid down in Article 7a(1) of Directive 98/70/EC should be supplemented by harmonised reporting requirements, a reporting format and harmonised definitions for Member State reporting to the Commission pertaining to the greenhouse gas performance of fuels consumed in the Union. In particular, these reporting requirements will enable the updating of the fossil fuel comparator described in point 19 of Part C of Annex IV to Directive 98/70/EC and point 19 of Part C of Annex V to Directive 2009/28/EC, and they will facilitate the reporting required pursuant to Articles 8(3) and 9(2) of Directive 98/70/EC as well as the updating of the calculation method to technical and scientific progress, in order to ensure that it meets its intended purpose. These data should include the quantity of fuel or energy placed on the market and fuel or energy type, the place of purchase and the origin of the fuel or energy placed on the market.

(15) It is appropriate for Member States to allow suppliers to fulfil their reporting requirements by relying on equivalent data being collected pursuant to other Union or national legislation so as to reduce the administrative burden, provided that the reporting is conducted in accordance with the requirements set out in Annex IV and the definitions laid down in Annexes I and III.

(16) In order to facilitate reporting by groups of suppliers pursuant to Article 7a(4) of Directive 98/70/EC, Article 7a(5)(c) of that Directive allows for the establishment of any necessary rules. It is desirable to facilitate such reporting in order to avoid disruption to physical fuel movements, since different suppliers place different fuels of differing proportions on the market, and hence may have to deploy different levels of resources to meet the greenhouse gas reduction target. It is therefore necessary to harmonise the definitions of the suppliers' identification, the quantity of fuel or energy placed on the market, the fuel or energy type, the place of purchase and the origin of the fuel or energy placed on the market. Furthermore, to avoid double counting in joint supplier reporting pursuant to Article 7a(4), it is appropriate to harmonise the implementation of the calculation and reporting method in the Member States, including the reporting to the Commission, so that the requisite information from a group of suppliers relates to a specific Member State.

(17) Pursuant to Article 8(3) of Directive 98/70/EC, Member States are to submit an annual report of national fuel quality data for the preceding calendar year in accordance with the format established in Commission Decision 2002/159/EC(4). To cover the amendments introduced to Directive 98/70/EC by Directive 2009/30/EC of the European Parliament and of the Council(5), and the subsequent additional reporting requirements on the Member States, and in the interest of effectiveness and harmonisation, it is necessary to clarify which information should be reported, and to adopt a format for the submission of data by suppliers and Member States.

(18) The Commission presented a draft measure to the Committee established by Directive 98/70/EC on 23 February 2012. The Committee was unable to adopt an opinion by the necessary qualified majority. It is therefore appropriate for the Commission to present a proposal to the Council pursuant to Article 5a(4) of Council Decision 1999/468/EC(6),

HAS ADOPTED THIS DIRECTIVE:

(2)

Commission Recommendation 2003/361/EC of 6 May 2003 concerning the definition of micro, small and medium-sized enterprises (OJ L 124, 20.5.2003, p. 36).

(3)

Directive 2009/28/EC of the European Parliament and of the Council of 23 April 2009 on the promotion of the use of energy from renewable sources and amending and subsequently repealing Directives 2001/77/EC and 2003/30/EC (OJ L 140, 5.6.2009, p. 16).

(4)

Commission Decision 2002/159/EC of 18 February 2002 on a common format for the submission of summaries of national fuel quality data (OJ L 53, 23.2.2002, p. 30).

(5)

Directive 2009/30/EC of the European Parliament and of the Council of 23 April 2009 amending Directive 98/70/EC as regards the specification of petrol, diesel and gas-oil and introducing a mechanism to monitor and reduce greenhouse gas emissions and amending Council Directive 1999/32/EC as regards the specification of fuel used by inland waterway vessels and repealing Directive 93/12/EEC (OJ L 140, 5.6.2009, p. 88).

(6)

Council Decision 1999/468/EC of 28 June 1999 laying down the procedures for the exercise of implementing powers conferred on the Commission (OJ L 184, 17.7.1999, p. 23).

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources