- Latest available (Revised)
- Original (As adopted by EU)
Commission Delegated Directive (EU) 2017/1975 of 7 August 2017 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for cadmium in colour converting light-emitting diodes (LEDs) for use in display systems (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(1), and in particular Article 5(1)(a) thereof,
Whereas:
(1) Directive 2011/65/EU requires Member States to ensure that electrical and electronic equipment placed on the market does not contain cadmium.
(2) Point 39 in Annex III to Directive 2011/65/EU exempted the use of cadmium in colour converting light-emitting diodes (LEDs) for illumination and display applications from the prohibition until 1 July 2014. The Commission received an application for renewal of this exemption before 1 January 2013, in accordance with Article 5(5) of Directive 2011/65/EU.
(3) Colour converting LEDs using quantum dots have been shown advantageous as compared to earlier technology regarding energy efficiency and colour performance. The overall balance of the use of cadmium-based quantum dots in displays has a positive impact due to their lower energy consumption as compared to currently available alternative technologies. The total negative environmental, health and consumer safety impacts caused by substitution of cadmium-based quantum dots in display applications where quantum dots are used are likely to outweigh the total environmental, health and consumer safety benefits thereof.
(4) The use of cadmium selenide in downshifting cadmium-based semiconductor nanocrystal quantum dots for use in display lighting applications should therefore be exempted from the prohibition for the period of two years after the publication of the Delegated Directive in the Official Journal of the European Union. This short validity period for the exemption is unlikely to have adverse impacts on innovation and the development of cadmium free alternatives.
(5) Cadmium-based quantum dot LEDs for illumination are not yet available on the market and their potential advantages in comparison with existing technologies are not properly quantifiable, thus a renewal of the exemption as regards illumination applications is not justified.
(6) Annex III to Directive 2011/65/EU should therefore be amended accordingly,
HAS ADOPTED THIS DIRECTIVE:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: