xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.

Commission Delegated Directive (EU) 2019/175

of 16 November 2018

amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead oxide in seal frit used for making window assemblies for certain laser tubes

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(1) and in particular Article 5(1)(a) thereof,

Whereas:

(1) Directive 2011/65/EU requires Member States to ensure that electrical and electronic equipment placed on the market does not contain certain hazardous substances listed in Annex II to that Directive. That requirement does not apply to the applications listed in Annex III to Directive 2011/65/EU.

(2) The different categories of electrical and electronic equipment for which Directive 2011/65/EU applies (categories 1 to 11) are listed in Annex I to that Directive.

(3) Lead is a restricted substance listed in Annex II to Directive 2011/65/EU. The use of lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes was, however, exempted from the restriction and is currently listed in entry 32 of Annex III to that Directive. The expiry date of that exemption was, for categories 1 to 7 and 10, 21 July 2016.

(4) The Commission received an application for renewal of that exemption before 21 January 2015, in accordance with Article 5(5) of Directive 2011/65/EU. The exemption remains valid until a decision on that application has been adopted.

(5) Lead-containing laser products are used as coherent light sources in a broad range of critical scientific and industrial applications, such as spectroscopy, microscopy and holography. Lead oxide-based material in Argon and Krypton laser products provides a critical thermo-mechanically stable and vacuum-tight seal between the optics and laser tube.

(6) A substitution or elimination of lead is still scientifically and technically impracticable for Argon and Krypton laser tubes due to the lack of reliable substitutes. The exemption does not weaken the environmental and health protection afforded by Regulation (EC) No 1907/2006 of the European Parliament and of the Council(2). The exemption for the use of lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes should therefore be renewed for categories 1 to 7 and 10.

(7) Since, for the applications concerned, no reliable alternatives are available today or are likely to be available on the market in the near future, the exemption for categories 1 to 7 and 10 should be renewed for the maximum duration of five years until 21 July 2021. In view of the results of the ongoing efforts to find a reliable substitution, the duration of the exemption is unlikely to have adverse impacts on innovation.

(8) For categories other than 1 to 7 and 10, the existing exemption remains valid as per the validity periods set out in the second subparagraph of Article 5(2) of Directive 2011/65/EU. For reasons of clarity, the dates of expiry should be added in Annex III to that Directive.

(9) Directive 2011/65/EU should therefore be amended accordingly,

HAS ADOPTED THIS DIRECTIVE:

Article 1U.K.

Annex III to Directive 2011/65/EU is amended as set out in the Annex to this Directive.

Article 2U.K.

1.Member States shall adopt and publish, by 29 February 2020 at the latest, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those provisions.

They shall apply those provisions from 1 March 2020.

When Member States adopt those provisions, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. Member States shall determine how such reference is to be made.

2.Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.

Article 3U.K.

This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Article 4U.K.

This Directive is addressed to the Member States.

Done at Brussels, 16 November 2018.

For the Commission

The President

Jean-Claude Juncker

ANNEXU.K.

In Annex III, entry 32 is replaced by the following:

32Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes

Expires on:

  • 21 July 2021 for categories 1-7 and 10,

  • 21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments,

  • 21 July 2023 for category 8 in vitro diagnostic medical devices,

  • 21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.

(2)

Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency (OJ L 396, 30.12.2006, p. 1).