Commission Delegated Directive (EU) 2019/175Show full title

Commission Delegated Directive (EU) 2019/175

of 16 November 2018

amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead oxide in seal frit used for making window assemblies for certain laser tubes

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(1) and in particular Article 5(1)(a) thereof,

Whereas:

(1) Directive 2011/65/EU requires Member States to ensure that electrical and electronic equipment placed on the market does not contain certain hazardous substances listed in Annex II to that Directive. That requirement does not apply to the applications listed in Annex III to Directive 2011/65/EU.

(2) The different categories of electrical and electronic equipment for which Directive 2011/65/EU applies (categories 1 to 11) are listed in Annex I to that Directive.

(3) Lead is a restricted substance listed in Annex II to Directive 2011/65/EU. The use of lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes was, however, exempted from the restriction and is currently listed in entry 32 of Annex III to that Directive. The expiry date of that exemption was, for categories 1 to 7 and 10, 21 July 2016.

(4) The Commission received an application for renewal of that exemption before 21 January 2015, in accordance with Article 5(5) of Directive 2011/65/EU. The exemption remains valid until a decision on that application has been adopted.

(5) Lead-containing laser products are used as coherent light sources in a broad range of critical scientific and industrial applications, such as spectroscopy, microscopy and holography. Lead oxide-based material in Argon and Krypton laser products provides a critical thermo-mechanically stable and vacuum-tight seal between the optics and laser tube.

(6) A substitution or elimination of lead is still scientifically and technically impracticable for Argon and Krypton laser tubes due to the lack of reliable substitutes. The exemption does not weaken the environmental and health protection afforded by Regulation (EC) No 1907/2006 of the European Parliament and of the Council(2). The exemption for the use of lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes should therefore be renewed for categories 1 to 7 and 10.

(7) Since, for the applications concerned, no reliable alternatives are available today or are likely to be available on the market in the near future, the exemption for categories 1 to 7 and 10 should be renewed for the maximum duration of five years until 21 July 2021. In view of the results of the ongoing efforts to find a reliable substitution, the duration of the exemption is unlikely to have adverse impacts on innovation.

(8) For categories other than 1 to 7 and 10, the existing exemption remains valid as per the validity periods set out in the second subparagraph of Article 5(2) of Directive 2011/65/EU. For reasons of clarity, the dates of expiry should be added in Annex III to that Directive.

(9) Directive 2011/65/EU should therefore be amended accordingly,

HAS ADOPTED THIS DIRECTIVE:

(1)

OJ L 174, 1.7.2011, p. 88.

(2)

Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and establishing a European Chemicals Agency (OJ L 396, 30.12.2006, p. 1).