Regulation (EC) No 1907/2006 of the European Parliament and of the CouncilShow full title

[X1 ANNEX XII U.K. GENERAL PROVISIONS FOR DOWNSTREAM USERS TO ASSESS SUBSTANCES AND PREPARE CHEMICAL SAFETY REPORTS

Editorial Information

X1 Substituted by Corrigendum to Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (Official Journal of the European Union L 396 of 30 December 2006).

INTRODUCTION U.K.

The purpose of this Annex is to set out how downstream users are to assess and document that the risks arising from the substance(s) they use are adequately controlled during their use for a use not covered by the Safety Data Sheet supplied to them and that other users further down the supply chain can adequately control the risks. The assessment shall cover the life-cycle of the substance, from its receipt by the downstream user, for his own uses and for his identified uses further down the supply chain. The assessment shall consider the use of the substance on its own, in a [F1 mixture] or in an article.

Textual Amendments

F1 Substituted by Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 (Text with EEA relevance).

In carrying out the chemical safety assessment and producing the Chemical Safety Report, the downstream user shall take account of information received from the supplier of the chemical in accordance with Article 31 and 32 of this Regulation. Where available and appropriate, an assessment carried out under Community legislation, (e.g. risk assessments completed under Regulation (EEC) No 793/93) shall be taken into account in the chemical safety assessment and be reflected in the Chemical Safety Report. Deviations from such assessments shall be justified. Assessments carried out under other international and national programmes may also be taken into account.

The process which the downstream user goes through in carrying out the chemical safety assessment and in producing his Chemical Safety Report, involves three steps:

STEP 1: DEVELOPMENT OF EXPOSURE SCENARIO(S) U.K.

The downstream user shall develop exposure scenarios for uses not covered in a Safety Data Sheet supplied to him in accordance with Section 5 of Annex I.

STEP 2: IF NECESSARY, A REFINEMENT OF THE HAZARD ASSESSMENT BY THE SUPPLIER U.K.

If the downstream user considers the hazard and PBT assessments reported in the Safety Data Sheet supplied to him to be appropriate, then no further hazard assessment or PBT and vPvB assessment is necessary. In this case he shall use the relevant information reported by the supplier for the risk characterisation. This shall be stated in the Chemical Safety Report.

If the downstream user considers the assessments reported in the Safety Data Sheet supplied to him to be inappropriate, then he shall carry out the relevant assessments in accordance with Sections 1 to 4 of Annex I as appropriate to him.

In those cases where the downstream user considers that information in addition to that provided by the supplier is necessary for producing his Chemical Safety Report the downstream user shall gather this information. Where this information can only be obtained by testing on vertebrate animals, he shall submit a proposal for a testing strategy to the Agency in accordance with Article 38. He shall explain why he considers that additional information is necessary. While waiting for results of further testing, he shall record in his chemical safety report the risk management measures intended to manage the risks being explored that he has put in place.

On completion of any additional testing, the downstream user shall revise the Chemical Safety Report, and his Safety Data Sheet if he is required to prepare one, as appropriate.

STEP 3: RISK CHARACTERISATION U.K.

A risk characterisation shall be carried out for each new exposure scenario as prescribed in Section 6 of Annex I. The risk characterisation shall be presented under the relevant heading of the Chemical Safety Report and summarised in the Safety Data Sheet under the relevant heading(s).

When generating an exposure scenario it will be necessary to make initial assumptions about the operating conditions and risk managements measures. If the initial assumptions lead to a risk characterisation indicating inadequate protection of human health and the environment, then it shall be necessary to carry out an iterative process with amendment of one or a number of factors until adequate control can be demonstrated. This may require the generation of additional hazard or exposure information or appropriate alteration of the process, operating conditions or risk management measures. Therefore, iterations may be made between on the one hand developing and revising an (initial) exposure scenario, which includes developing and implementing risk management measures, and on the other hand generating further information to produce the definitive exposure scenario. The purpose of generating further information is to establish a more precise risk characterisation, based on a refined hazard assessment and/or exposure assessment.

The downstream user shall produce a Chemical Safety Report detailing his chemical safety assessment using Part B, Sections 9 and 10, of the format set out in Section 7 of Annex I and the other sections of this format, if appropriate.

Part A of the Chemical Safety Report shall include a declaration that the risk management measures outlined in the relevant exposure scenarios are implemented by the downstream user for his own uses and that the risk management measures outlined in the exposure scenarios for the identified uses are communicated down the supply chain.]