Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.

Commission Regulation (EC) No 208/2006

of 7 February 2006

amending Annexes VI and VIII to Regulation (EC) No 1774/2002 of the European Parliament and of the Council as regards processing standards for biogas and composting plants and requirements for manure

(Text with EEA relevance)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Regulation (EC) No 1774/2002 of the European Parliament and of the Council of 3 October 2002 laying down health rules concerning animal by-products not intended for human consumption(1), and in particular Article 32(1) thereof,

Whereas:

(1) Regulation (EC) No 1774/2002 provides for measures to ensure that manure and products derived there from are used or disposed of in such a way as not to pose a risk to public or animal health.

(2) Chapter II of Annex VI to Regulation (EC) No 1774/2002 sets out specific requirements for the approval of biogas and composting plants using animal by-products.

(3) Following the opinion of the European Food Safety Authority (EFSA) of 7 September 2005 on the safety vis-à-vis biological risks of biogas and composting treatment standards of animal by-products, it is appropriate to amend Chapter II of Annex VI to Regulation (EC) No 1774/2002 by allowing authorisation of other process parameters.

(4) Chapter III of Annex VIII to Regulation (EC) No 1774/2002 sets out requirements for manure, processed manure and processed manure products and lays down the processing and control parameters manure has to undergo to fulfil the requirements for processed manure and processed manure products.

(5) Following the opinion of EFSA of 7 September 2005 on the biological safety of heat treatment of manure, it is appropriate to amend the relevant requirements of Chapter III of Annex VIII to take account of that opinion.

(6) Regulation (EC) No 1774/2002 should therefore be amended accordingly.

(7) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on the Food Chain and Animal Health,

HAS ADOPTED THIS REGULATION:

Article 1U.K.

Annexes VI and VIII to Regulation (EC) No 1774/2002 are amended in accordance with the Annex to this Regulation.

Article 2U.K.

This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Union.

It shall apply from 1 January 2006. However, the requirements in Annex VI, chapter II, point C(13a) and in Annex VIII, chapter III, point (II)(A)(5)(c) to Regulation (EC) No 1774/2002 shall apply from 1 January 2007.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 7 February 2006.

For the Commission

Markos Kyprianou

Member of the Commission

ANNEXU.K.

Annexes VI and VIII to Regulation (EC) No 1774/2002 are amended as follows:

1.

In Annex VI, Chapter II is amended as follows:

(a)

Points A(1) and (2) are replaced by the following:

1.A biogas plant must be equipped with:

(a)

a pasteurisation/hygienisation unit, which cannot be by-passed, with:

(i)

installations for monitoring temperature against time;

(ii)

recording devices to record continuously the results of the monitoring measurements referred to in (i); and

(iii)

an adequate safety system to prevent insufficient heating;

(b)

adequate facilities for the cleaning and disinfecting of vehicles and containers upon leaving the biogas plant.

However, a pasteurisation/hygienisation unit shall not be mandatory for biogas plants that transform only:

(i)

animal by-products that have undergone processing Method 1;

(ii)

Category 3 material that has undergone pasteurisation/hygienisation elsewhere; or

(iii)

animal by-products which may be used as raw material without processing.

If the biogas plant is located on premises where farmed animals are kept and does not only use manure which accrues from those animals, the plant shall be located at an adequate distance from the area where such animals are kept and there must be, in any case, total physical separation between that plant and those animals and their feed and bedding, with fencing where necessary.

Point B(11) is replaced by the following:

Point C(12) is replaced by the following:

Point C(13) is replaced by the following:

The following Point C(13a) is inserted:

13a.However, the competent authority may authorise the use of other standardised process parameters provided an applicant demonstrates that such parameters ensure minimising of biological risks. That demonstration shall include a validation, which shall be carried out in accordance with points (a) to (f):

(a)

Identification and analysis of possible hazards, including the impact of input material, based on a full definition of the processing conditions.

(b)

A risk assessment, which evaluates how the specific processing conditions referred to in (a) are achieved in practice under normal and atypical situations.

(c)

Validation of the intended process by measuring the reduction of viability/infectivity of:

(i)

endogenous indicator organisms during the process, where the indicator is:

  • consistently present in the raw material in high numbers,

  • not less heat resistant to the lethal aspects of the treatment process, but also not significantly more resistant than the pathogens for which it is being used to monitor,

  • relatively easy to quantify and relatively easy to identify and to confirm;

or

(ii)

a well-characterised test organism or virus, during exposure, introduced in a suitable test body into the starting material.

(d)

The validation of the intended process referred to in (c) must demonstrate that the process achieves the following overall risk reduction:

(i)

for thermal and chemical processes by:

  • reduction of 5 log10 of Enterococcus faecalis or Salmonella Senftenberg (775W, H2S negative),

  • reduction of infectivity titre of thermo resistant viruses such as parvovirus by at least 3 log10, whenever they are identified as a relevant hazard;

and

(ii)

as regards chemical processes also by:

  • reduction of resistant parasites such as eggs of ascaris sp. by at least 99,9 % (3 log10) of viable stages.

(e)

Designing a complete control programme including procedures for monitoring the functioning of the process referred to in (c).

(f)

Measures ensuring continuous monitoring and supervision of the relevant process parameters fixed in the control programme when operating the plant.

Details on the relevant process parameters used in a biogas or composting plant as well as other critical control points must be recorded and maintained so that the owner, operator or their representative and the competent authority can monitor the operation of the plant. Records must be made available to the competent authority on request.

Information relating to a process authorised under this point must be made available to the Commission on request.

Annex VIII, Chapter III, Point II.A.(5) is replaced by the following:

5.The placing on the market of processed manure and processed manure products shall be subject to the following conditions set out in points (a) to (e):

(a)

They must come from a technical plant, a biogas plant or a composting plant approved by the competent authority in accordance with this Regulation.

(b)

They must have been subjected to a heat treatment process of at least 70 °C for at least 60 minutes and they must have been subjected to reduction in spore-forming bacteria and toxic formation.

(c)

However, the competent authority may authorise the use of other standardised process parameters than those described in (b) provided an applicant demonstrates that such parameters ensure minimising of biological risks. This demonstration shall include a validation, which shall be carried out as follows:

(i)

Identification and analysis of possible hazards including the impact of input material, based on a full definition of the processing conditions, and a risk assessment, which evaluates how the specific processing conditions are achieved in practice under normal and atypical situations.

(ii)

Validation of the intended process

(ii-1)

by measuring the reduction of viability/infectivity of endogenous indicator organisms during the process, where the indicator is:

  • consistently present in the raw material in high numbers,

  • not less heat resistant to the lethal aspects of the treatment process, but also not significantly more resistant than the pathogens for which it is being used to monitor,

  • relatively easy to quantify and relatively easy to identify and confirm;

or

(ii-2)

by measuring the reduction of viability/infectivity, during exposure, of a well-characterised test organism or virus introduced in a suitable test body into the starting material.

(iii)

The validation referred to in point (ii) must demonstrate that the process achieves the following overall risk reduction:

  • for thermal and chemical processes by reduction of Enterococcus faecalis by at least 5 log10 and by reduction of infectivity titre of thermo resistant viruses such as parvovirus, where they are identified as a relevant hazard, by at least 3 log10,

  • for chemical processes also by reduction of resistant parasites such as eggs of ascaris sp. by at least 99,9 % (3 log10) of viable stages.

(iv)

Designing a complete control programme including procedures for monitoring the process.

(v)

Measures ensuring continuous monitoring and supervision of the relevant process parameters fixed in the control programme when operating the plant.

Details on the relevant process parameters used in a plant as well as other critical control points must be recorded and maintained so that the owner, operator or their representative and the competent authority can monitor the operation of the plant. Records must be made available to the competent authority on request.

Information relating to a process authorised under this point must be made available to the Commission on request.

(d)

Representative samples of the manure taken during or immediately after processing at the plant in order to monitor the process must comply with the following standards:

Escherichia coli: n = 5, c = 5, m = 0, M = 1 000 in 1 g;

or

Enterococaceae: n = 5, c = 5, m = 0, M = 1 000 in 1 g;

and

Representative samples of the manure taken during or on withdrawal from storage at the technical, biogas or composting plant must comply with the following standards:

Salmonella: absence in 25 g: n = 5; c = 0; m = 0; M = 0

where:

n

=

number of samples to be tested;

m

=

threshold value for the number of bacteria; the result is considered satisfactory if the number of bacteria in all samples does not exceed m;

M

=

maximum value for the number of bacteria; the result is considered unsatisfactory if the number of bacteria in one or more samples is M or more; and

c

=

number of samples the bacterial count of which may be between m and M, the sample still being considered acceptable if the bacterial count of the other samples is m or less.

Processed manure or processed manure products not complying with the above requirements shall be regarded as unprocessed;

(e)

They must be stored in such a way that once processed contamination or secondary infection and dampness is minimised. They must therefore be stored in:

(i)

well-sealed and insulated silos, or

(ii)

properly sealed packs (plastic bags or “big bags”).