Commission Regulation (EC) No 1221/2008 of 5 December 2008 amending Regulation (EC) No 1580/2007 laying down implementing rules of Council Regulations (EC) No 2200/96, (EC) No 2201/96 and (EC) No 1182/2007 in the fruit and vegetable sector as regards marketing standards (repealed)

Status:

This is the original version as it was originally adopted in the EU.
This legislation may since have been updated - see the latest available (revised) version

“ANNEX IMARKETING STANDARDS REFERRED TO IN ARTICLE 2a

PART AGeneral Marketing standard

1.Minimum quality requirements

Subject to the tolerances allowed, the products shall be:

intact,
sound; products affected by rotting or deterioration such as to make them unfit for consumption are excluded,
clean, practically free of any visible foreign matter,
practically free from pests,
practically free from damage caused by pests affecting the flesh,
free of abnormal external moisture,
free of any foreign smell and/or taste.

The condition of the products must be such as to enable them:

to withstand transport and handling,
to arrive in satisfactory condition at the place of destination.

2.Minimum maturity requirements

The products must be sufficiently developed and display satisfactory ripeness.

The development and state of maturity of the products must be such as to enable them to continue their ripening process and to reach a satisfactory degree of ripeness.

3.Tolerance

A tolerance of 10 % by number or weight of product not satisfying the minimum quality requirements shall be permitted in each lot. This tolerance shall not however cover product affected by rotting or any other deterioration rendering it unfit for consumption.

4.Marking of origin of produce

Full name of the country of origin. For products originating in a Member State this shall be in the language of the country of origin or any other language understandable by the consumers of the country of destination. For other products, this shall be in any language understandable by the consumers of the country of destination.

PART BSPECIFIC MARKETING STANDARDS

PART 1:MARKETING STANDARD FOR APPLES

I.DEFINITION OF PRODUCE

This standard applies to apples of varieties (cultivars) grown from Malus domestica Borkh., to be supplied fresh to the consumer, apples for industrial processing being excluded.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements of apples, after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, apples must be:

intact,
sound, produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
practically free from pests,
practically free from damage caused by pests,
free of abnormal external moisture,
free of any foreign smell and/or taste.

In addition, they must have been carefully picked.

The development and condition of the apples must be such as to enable them:

to continue their maturing process and to reach the degree of maturity required in relation to the varietal characteristics(1) (2),
to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.

B.Classification

Apples are classified in three classes defined below.

(i)“Extra” class

Apples in this class must be of superior quality. In shape, size and colouring, they must be characteristic of the variety(3) and with the stalk which must be intact.

The flesh must be perfectly sound.

They must be free from defects with the exception of very slight superficial defects provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.

(ii)Class I

Apples in this class must be of good quality. In shape, size and colouring, they must be characteristic of the variety(3).

The flesh must be perfectly sound.

The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:

a slight defect in shape,
a slight defect in development,
a slight defect in colouring,
slight skin defects which must not extend over more than:
- 2 cm in length for defects of elongated shape,
- 1 cm² of total surface area for other defects, with the exception of scab (Venturia inaequalis), which must not extend over more than 0,25 cm² of total surface area,
- slight bruising not exceeding 1 cm² of total surface area and not discoloured.

The stalk may be missing, provided the break is clean and the adjacent skin is not damaged.

(iii)Class II

This class includes apples which do not qualify for inclusion in the higher classes but satisfy the minimum requirements specified above(3).

The flesh must be free from major defects.

The following defects are allowed provided the fruit retains its essential characteristics as regards the quality, the keeping quality and presentation:

defects in shape,
defects in development,
defects in colouring,
skin defects which must not extend over more than:
- 4 cm in length for defects of elongated shape,
- 2,5 cm² of total surface area for other defects, with the exception of scab (Venturia inaequalis), which must not extend over more than 1 cm² of total surface area,
- slight bruising not exceeding 1,5 cm² of total surface area which may be slightly discoloured.

III.PROVISIONS CONCERNING SIZING

Size is determined either by the maximum diameter of the equatorial section or by weight.

For all varieties and for all classes the minimum size is 60 mm, if measured by diameter or 90 g, if measured by weight. Fruit of smaller sizes may be accepted, if the Brix level of the produce is greater than or equal to 10,5^o Brix and the size is not smaller than 50 mm or 70 g.

To ensure there is uniformity of size within the package:

(a)

for fruit sized according to the diameter, the difference in diameter between fruit in the same package shall be limited to:

5 mm for “Extra” Class fruit and for Classes I and II fruit packed in rows and layers. However, for apples of the varieties Bramley's Seedling (Bramley, Triomphe de Kiel) and Horneburger, the difference in diameter may amount to 10 mm, and
10 mm for Class I fruit packed loose in the package or sales packages. However, for apples of the varieties Bramley's Seedling (Bramley, Triomphe de Kiel) and Horneburger, the difference in diameter may amount to 20 mm, or

(b)

for fruit sized according to weight, the difference in weight between fruit in the same package shall be limited to:

20 % of the average individual fruit weight in the package for “Extra” Class fruit and for Classes I and II fruit packed in rows and layers, and
25 % of the average individual fruit weight in the package for Class I fruit packed loose in the package or in consumer packages.

There is no sizing uniformity requirement for Class II fruit packed loose in the package or in consumer packages.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)“Extra” class

5 % by number or weight of apples not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.

(ii)Class I

10 % by number or weight of apples not satisfying the requirements of the class, but meeting those of Class II, or exceptionally, coming within the tolerances of that class.

(iii)Class II

10 % by number or weight of apples satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.

Within this tolerance, a maximum of 2 % number or weight of fruit is allowed which shows the following defects:

serious attacks of cork (bitter pit) or water-core,
slight damage or unhealed cracks,
very slight traces of rot,
presence of internal feeding pests and/or damage to the flesh caused by pests.

B.Size tolerances

For all classes:

For all classes: a total tolerance of 10 per cent, by number or weight, of fruit not satisfying the requirements as regards sizing is allowed. This tolerance may not be extended to include produce with a size:

5 mm or more below the minimum diameter when size is determined by diameter,
10 g or more below the minimum weight when size is determined by weight.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only apples of the same origin, variety, quality and size (if sized) and the same degree of ripeness.

In the case of the “Extra” class, uniformity also applies to colouring.

Sales packages of a net weight not exceeding 5 kg may contain mixtures of apples of different varieties, provided they are uniform in quality and, for each variety concerned, in origin, size (if sized) and degree of ripeness.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The apples must be packed in such a way as to protect the produce properly. In particular, sales packages of a net weight exceeding 3 kg shall be sufficiently rigid to ensure proper protection of the produce.

The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.

Packages must be free of all foreign matter.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

C.Presentation

For “Extra” class, fruit must be packed in layers.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside.

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“Apples” if the contents are not visible from the outside
Name of the variety or varieties where appropriate.
In the case of sales packages containing a mixture of apples of different varieties, names of each of the different varieties in the package.

C.Origin of produce

Country of origin and, optionally, district where grown, or national, regional or local place name

In the case of sales packages containing a mixture of varieties of apples of different origins, the indication of each country of origin shall appear next to the name of the variety concerned.

D.Commercial specifications

Class
Size or, for fruit packed in layers, number of units.

If identification is by the size, this should be expressed:

(a)

for produce subject to the uniformity rules, as minimum and maximum diameters or minimum and maximum weight;

(b)

for produce not subject to the uniformity rules, the diameter or the weight of the smallest fruit in the package followed by “and over” or “+” or equivalent denomination or, where applicable, followed by the diameter or weight of the largest fruit.

E.Official control mark (optional)

Packages need not to bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.

Appendix

1.Colouring criteria, colouring groups and codes

Colouring group	A(Red varieties)	B(Mixed red colouring varieties)	C(Striped slightly coloured varieties)	D(Other varieties)
Colouring group	Total surface area of red colouring characteristic of the variety	Total surface area of mixed red colouring characteristic of the variety	Total surface area of slightly red coloured, blushed or striped characteristic of the variety	D(Other varieties)
Extra class	3/4	1/2	1/3	No requirement as to red colouring
Class I	1/2	1/3	1/10
Class II	1/4	1/10	—

2.Russeting criteria

Group R: Varieties for which russeting is a characteristic of the skin and is not a defect if it corresponds to the typical appearance of the variety.

For varieties not marked with an ‘R’ in the list below, russeting is allowed within the following limits:

	‘Extra’ class	Class I	Class II	Tolerance for Class II
(i) Brown patches	not outside the stem cavity	may go slightly beyond the stem or pistil cavities	may go beyond the stem or pistil cavities	fruit not seriously detracting from the appearance and condition of the package
(i) Brown patches	not rough	not rough	slightly rough
(ii) Russeting		Maximum surface area of the fruit permitted
thin net-like russeting (not contrasting strongly with the general colouring of the fruit)	slight and isolated traces of russeting not altering the general appearance of the fruit or of the package	1/5	1/2	fruit not seriously detracting from the appearance and condition of the package
heavy	none	1/20	1/3	fruit not seriously detracting from the appearance and condition of the package
cumulative defects (with the exception of the brown patches which are excluded from these cumulative defects). In no case may thin russeting and heavy russeting taken together exceed a maximum of:	—	1/5	1/2	fruit not seriously detracting from the appearance and condition of the package

3.Non-exhaustive list of apple varieties classified according to their colouring and russeting criteria

Fruits of varieties that are not part of the list must be graded according to their varietal characteristics.

Varieties	Synonyms	Colour group	Russeting
^a At least 20 % red in Class I and Class II.
^b However, for the variety Jonagold, at least one-tenth surface of the fruit in Class II must be streaked with red colouring.
African Red		B
Akane	Tohoku 3	B
Alborz Seedling		C
Aldas		B
Alice		B
Alkmene	Early Windsor	C
Alwa		B
Angold		C
Apollo	Beauty of Blackmoor	C
Arkcharm	Arkansas No 18, A 18	C
Arlet		B	R
Aroma		C
Red coloured mutants of Aroma, for example Aroma Amorosa		B
Auksis		B
Belfort	Pella	B
Belle de Boskoop and mutants		D	R
Belle fleur double		D
Berlepsch	Freiherr von Berlepsch	C
Berlepsch rouge	Red Berlepsch, Roter Berlepsch	B
Blushed Golden
Bohemia		B
Boskoop rouge	Red Boskoop, Roter Boskoop	B	R
Braeburn		B
Red coloured mutants of Braeburn, for example:		A
Hidala
Joburn
Lochbuie Red Braeburn
Mahana Red
Mariri Red
Redfield
Royal Braeburn
Bramley's Seedling	Bramley, Triomphe de Kiel	D
Brettacher Sämling		D
Calville (group of …)		D
Cardinal		B
Carola	Kalco	C
Caudle		B
Charden		D
Charles Ross		D
Civni		B
Coromandel Red	Corodel	A
Cortland		B
Cox's orange pippin and mutants	Cox Orange	C	R
Red coloured mutants of Cox's Orange Pippin for example:		B	R
Cherry Cox
Crimson Bramley		D
Cripps Pink		C
Cripps Red		C^a
Dalinbel		B
Delblush		D
Delcorf and mutants, for example: Dalili Monidel		C
Delgollune		B
Delicious ordinaire	Ordinary Delicious	B
Deljeni		D
Delikates		B
Delor		C
Discovery		C
Dunn's Seedling		D	R
Dykmanns Zoet		C
Egremont Russet		D	R
Elan		D
Elise	Red Delight	A
Ellison's orange	Ellison	C
Elstar and mutants, for example:		C
Daliter
Elshof
Elstar Armhold
Elstar Reinhardt
Red coloured mutants of Elstar, for example:		B
Bel-El
Daliest
Goedhof
Red Elstar
Valstar
Empire		A
Falstaff		C
Fiesta	Red Pippin	C
Florina		B
Fortune		D	R
Fuji and mutants		B
Gala		C
Red coloured mutants of Gala, for example:		A
Annaglo
Baigent
Galaxy
Mitchgla
Obrogala
Regala
Regal Prince
Tenroy
Garcia		D
Gloster		B
Goldbohemia		D
Golden Delicious and mutants		D
Golden Russet		D	R
Goldrush	Coop 38	D
Goldstar		D
Gradigold		D
Granny Smith		D
Gravenstein rouge	Red Gravenstein, Roter Gravensteiner	B
Gravensteiner	Gravenstein	D
Greensleeves		D
Holsteiner Cox and mutants	Holstein	D	R
Holstein rouge	Red Holstein, Roter Holsteiner Cox	C	R
Honeycrisp		C
Honeygold		D
Horneburger		D
Howgate Wonder	Manga	D
Idared		B
Ingrid Marie		B	R
Isbranica	Izbranica	C
Jacob Fisher		D
Jacques Lebel		D
Jamba		C
James Grieve and mutants		D
James Grieve rouge	Red James Grieve	B
Jarka		C
Jerseymac		B
Jester		D
Jonagold^b and mutants, for example:		C
Crowngold
Daligo
Daliguy	Jonasty
Dalijean	Jonamel
Jonagold 2000	Excel
Jonabel
Jonabres
King Jonagold
New Jonagold	Fukushima
Novajo	Veulemanns
Schneica
Wilmuta
Jonagored and mutants, for example:		A
Decosta
Jomured	Van de Poel
Jonagold Boerekamp
Jomar
Jonagored Supra
Jonaveld
Primo
Romagold	Surkijn
Rubinstar
Red Jonaprince
Jonalord		C
Jonathan		B
Julia		B
Jupiter		D
Karmijn de Sonnaville		C	R
Katy	Katja	B
Kent		D	R
Kidd's orange red		C	R
Kim		B
Koit		C
Krameri Tuvioun		B
Kukikovskoje		B
Lady Williams		B
Lane's Prince Albert		D
Laxton's Superb	Laxtons Superb	C	R
Ligol		B
Lobo		B
Lodel		A
Lord Lambourne		C
Maigold		B
Mc Intosh		B
Meelis		B
Melba		B
Melodie		B
Melrose		C
Meridian		C
Moonglo		C
Morgenduft	Imperatore	B
Mountain Cove		D
Mutsu		D
Normanda		C
Nueva Europa		C
Nueva Orleans		B
Odin		B
Ontario		B
Orlovskoje Polosatoje		C
Ozark Gold		D
Paula Red		B
Pero de Cirio		D
Piglos		B
Pikant		B
Pikkolo		C
Pilot		C
Pimona		C
Pinova		C
Pirella		B
Piros		C
Rafzubex		A
Rafzubin		C
Rajka		B
Rambour d'hiver		D
Rambour Franc		B
Reanda		B
Rebella		C
Red Delicious and mutants, for example:		A
Campsur
Erovan
Evasni
Flatrar
Fortuna Delicious
Otago
Red King
Red Spur
Red York
Richared
Royal Red
Sandidge
Shotwell Delicious
Stark Delicious
Starking
Starkrimson
Starkspur
Topred
Trumdor
Well Spur
Red Dougherty		A
Red Rome		A
Redkroft		A
Regal		A
Regina		B
Reglindis		C
Reine des Reinettes	Goldparmäne, Gold Parmoné	C
Reineta Encarnada		B
Reinette Rouge du Canada		B
Reinette d'Orléans		D
Reinette Blanche du Canada	Reinette du Canada, Canada Blanc, Kanadarenette, Renetta del Canada	D	R
Reinette de France		D
Reinette de Landsberg		D
Reinette grise du Canada	Graue Kanadarenette	D	R
Relinda		C
Remo		B
Renora		B
Resi		B
Resista		D
Retina		B
Rewena		B
Roja de Benejama	Verruga, Roja del Valle, Clavelina	A
Rome Beauty	Belle de Rome, Rome	B
Rosana	Berner Rosenapfel	B
Royal Beaut		A
Rubin		C
Rubinola		B
Sciearly		A
Scifresh		B
Sciglo		A
Sciray	GS48	A
Scired		A	R
Sciros		A
Selena		B
Shampion		B
Sidrunkollane Talioun		D
Sinap Orlovskij	Orlovski Sinap	D
Snygold	Earlygold	D
Sommerregent		C
Spartan		A
Splendour		A
St. Edmunds Pippin		D	R
Stark's Earliest		C
Štaris	Staris	A
Sturmer Pippin		D	R
Sügisdessert		C
Sügisjoonik		C
Summerred		B
Sunrise		A
Sunset		D	R
Suntan		D	R
Sweet Caroline		C
Talvenauding		B
Tellisaare		B
Tiina		B
Topaz		B
Tydeman's Early Worcester	Tydeman's Early	B
Veteran		B
Vista Bella	Bellavista	B
Wealthy		B
Worcester Pearmain		B
York		B
Zarja Alatau	Zarya Alatau	D

PART 2:MARKETING STANDARD FOR CITRUS FRUITS

I.DEFINITION OF PRODUCE

This standard applies to the following fruit, classified as “citrus fruit”, to be supplied fresh to the consumer, citrus fruit for industrial processing being excluded:

lemons of varieties (cultivars) grown from the species Citrus limon (L.) Burm. f.,
mandarins of varieties (cultivars) grown from the species Citrus reticulata Blanco, including satsumas (Citrus unshiu Marcow.), clementines (Citrus clementina Hort. ex Tan.), common mandarins (Citrus deliciosa Ten.) and tangerines (Citrus tangerina Hort. ex Tan.) grown from these species and its hybrids, hereinafter called “mandarins”,
oranges of varieties (cultivars) grown from the species Citrus sinensis (L.) Osb.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements of the citrus fruit after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, the citrus fruit must be:

intact,
free of bruising and/or extensive healed over cuts,
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean practically free of any visible foreign matter,
practically free from pests,
practically free from damage caused by pests,
free of signs of internal shrivelling,
free of damage caused by low temperature or frost,
free of all abnormal external moisture,
free of any foreign smell and/or taste.

The citrus fruit must have been carefully picked and have reached an appropriate degree of development and ripeness account being taken of criteria proper to the variety, the time of picking and the growing area.

The development and state of ripeness of the citrus fruit must be such as to enable them:

to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.

Citrus fruit meeting the ripeness requirements of this Annex may be “degreened”. This treatment is permitted only if the other natural organoleptic characteristics are not modified.

B.Maturity requirements

Maturity of citrus fruit is defined by the following parameters specified for each specie below:

Minimum juice content

Colouring

The degree of colouring shall be such that, following normal development the citrus fruit reach the colour typical of the variety at their destination point.

(i)Lemons

Minimum juice content:
Verdelli and Primofiore lemons:
20 %

Other lemons:
25 %
Colouring: must be typical of the variety. However fruits with a green (but not dark green) colour are allowed provided they satisfy the minimum requirements as to juice content.

(ii)Mandarins

Minimum juice content:
Mandarins, excluding Clementines:
33 %

Clementines:
40 %
Colouring: must be typical of the variety on at least one third of the surface of the fruit.

(iii)Oranges

Colouring must be typical of the variety. Fruits with light green colour are allowed, provided it does not exceed one fifth of the total surface of the fruit. Fruits must show the following minimum juice content:

Blood oranges:	30 %
Navels group:	33 %
Other varieties:	35 %

However, oranges produced in areas with high air temperatures and high relative humidity conditions during the developing period can be of a green colour exceeding one fifth of the total surface area, provided they satisfy the following minimum juice content:

Varieties Mosambi, Sathgudi and Pacitan:	33 %
Other varieties:	45 %

C.Classification

Citrus fruit are classified in three classes defined below:

(i)“Extra” Class

Citrus fruit in this class must be of superior quality. In shape, external appearance, development and colouring they must be characteristic of the variety and/or commercial type.

They must be free from defects with the exception of very slight superficial defects, provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.

(ii)Class I

Citrus fruit in this class must be of good quality. They must be characteristic of the variety and/or commercial type.

The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:

slight defect in shape,
slight defect in colouring,
slight skin defects occurring during the formation of the fruit, such as silver scurfs, russets, etc.,
slight healed defects due to a mechanical cause such as hail damage, rubbing, damage from handling, etc.

(iii)Class II

This class includes citrus fruit which do not qualify for inclusion in the higher classes but satisfy the minimum requirements specified above.

The following defects may be allowed, provided the citrus fruit retain their essential characteristics as regards the quality, the keeping quality and presentation:

defect in shape,
defect in colouring,
rough skin,
skin defects occurring during the formation of the fruit, such as silver scurfs, russets, etc.,
healed defects due to a mechanical cause such as hail damage, rubbing, damage from handling, etc.,
superficial healed skin alterations,
slight and partial detachment of the pericarp for oranges (which is allowed for mandarins).

III.PROVISIONS CONCERNING SIZING

Size is determined by the maximum diameter of the equatorial section of the fruit.

A.Minimum size

Fruits of less than the following minimum sizes are excluded:

Lemons:	45 mm
Mandarins, excluding clementines:	45 mm
Clementines:	35 mm
Oranges:	53 mm

B.Size scales

The scales of sizes are as follows:

Oranges		Lemons		Mandarins
^a Sizes below 45 mm refer only to clementines.
Size code	Diameter(mm)	Size code	Diameter(mm)	Size code	Diameter(mm)
0	92-110	0	79-90	1-XXX	78 and above
1	87-100	1	72-83	1-XX	67-78
2	84-96	2	68-78	1 or 1-X	63-74
3	81-92	3	63-72	2	58-69
4	77-88	4	58-67	3	54-64
5	73-84	5	53-62	4	50-60
6	70-80	6	48-57	5	46-56
7	67-76	7	45-52	6^a	43-52
8	64-73			7	41-48
9	62-70			8	39-46
10	60-68			9	37-44
11	58-66			10	35-42
12	56-63
13	53-60

Citrus fruit may be packed by count. In this case, provided the size uniformity required in Title III, point C, is retained, the size range in the package may fall outside a single size code, but within two adjacent codes.

C.Uniformity

Uniformity in size is achieved by the abovementioned size scales, unless otherwise stated as follows:

(i)

for fruit arranged in regular layers, in packages or in unit consumer packages, the difference between the smallest and the largest fruit in the same package, within a single size code or, in the case of citrus fruit packed by count, within two adjacent codes, must not exceed the following maxima:

	Size codes	Maximum difference between fruit in the same package(in mm)
Lemons	0 to 7	7
Mandarins	1-XXX-4 5 to 6 7 to 10	9 8 7
Oranges	0 to 2 3 to 6 7 to 13	11 9 7

Size codes

Maximum difference between fruit in the same package(in mm)

Lemons

0 to 7

Mandarins

1-XXX-4

5 to 6

7 to 10

Oranges

0 to 2

3 to 6

7 to 13

(ii)

for fruit not arranged in regular layers, in packages or in rigid unit consumer packages, the difference between the smallest and the largest fruit in the same package must not exceed the range of the appropriate size grade in the size scale, or, in the case of citrus fruit packed by count, the range in mm of one of the two adjacent codes concerned;

(iii)

for fruit in bulk bins and fruit in non-rigid (nets, bags, etc.) unit consumer packages, the maximum size difference between the smallest and the largest fruit in the same lot or package must not exceed the range obtained by grouping three consecutive sizes in the size scale.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)“Extra” Class

5 % by number or weight of citrus fruit not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.

(ii)Class I

10 % by number or weight of citrus fruit not satisfying the requirements of the class, but meeting those of Class II, or exceptionally, coming within the tolerances of that class.

(iii)Class II

10 % by number or weight of citrus fruit satisfying neither the requirements of the class, nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption. Within this tolerance, a maximum of 5 % is allowed of fruit showing slight superficial unhealed damage, dry cuts or soft and shrivelled fruit.

B.Size tolerances

For all classes and types of presentation: 10 % by number or weight of citrus fruit corresponding to the size immediately below and/or above that (or those, in the case of the combination of three sizes) mentioned on the packages is allowed.

In any case, the tolerance of 10 % applies only to fruit not smaller than the following minima:

Lemons:	43 mm
Mandarins, excluding clementines:	43 mm
Clementines:	34 mm
Oranges:	50 mm

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only citrus fruit of the same origin, variety or commercial type, quality, and size, and appreciably of the same degree of ripeness and development.

In addition, for the “Extra” Class, uniformity in colouring is required.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The citrus fruit must be packed in such a way as to protect the produce properly.

If the fruit are wrapped, thin, dry, new and odourless(4) paper must be used.

The use of any substance tending to modify the natural characteristics of the citrus fruit, especially its taste or smell(4), is prohibited.

Packages must be free of all foreign matter. However, a presentation where a short (not wooden) twig with some green leaves adheres to the fruit is allowed.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

C.Presentation

The citrus fruit may be presented:

(a)

arranged in regular layers in packages;

(b)

not arranged in regular layers in packages or in bulk bins. This presentation is only allowed for Classes I and II;

(c)

in individual packages for direct sale to the consumer of a weight less than 5 kg either

made up by number of fruit, or
made up by net weight of the package.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside.

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

Name of the species if the produce is not visible from the outside, except for mandarins for which the name of the specie or variety (where applicable) is compulsory,
Name of the variety, for oranges,
Name of the type:
for lemons: the indication “Verdelli” and “Primofiore” where appropriate,
for clementines: the indication “Clementines, pipless”, “Clementines” (1 to 10 pips), “Clementines with pips” (more than 10 pips) where appropriate.

C.Origin of produce

Country of origin and, optionally, district where grown, or national, regional or local place name.

D.Commercial specifications

Class.
Size code for fruit presented in accordance with the size scale or the upper and the lower limiting size code in the case of three consecutive sizes of the size scale.
Size code (or, when fruit packed by count fall under two adjacent codes, size codes or minimum and maximum diameter) and number of fruit, in the case of fruit arranged in layers in the package.
When used, mention of the preserving agent or other chemical substances used at post-harvest stage.

E.Official control mark (optional)

PART 3:MARKETING STANDARD FOR KIWIFRUITS

I.DEFINITION OF PRODUCE

This standard applies to kiwifruit of varieties (cultivars) grown from Actinidia chinensis (Planch.) and Actinidia deliciosa (A. Chev., C.F. Liang and A.R. Ferguson) to be supplied fresh to the consumer, kiwifruit for industrial processing being excluded.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements of kiwifruit, after preparation and packaging.

A.Minimum quality requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, the kiwifruit must be:

intact (but free of peduncle),
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
practically free from pests,
practically free from damage caused by pests,
adequately firm; not soft, shrivelled or water-soaked,
well formed, double/multiple fruit being excluded,
free of abnormal external moisture,
free of any foreign smell and/or taste.

The development and condition of the kiwifruit must be such as to enable them:

to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.

B.Minimum maturity requirements

The kiwifruit must be sufficiently developed and display satisfactory ripeness. In order to satisfy this requirement, the fruit must have attained a degree of ripeness:

at packing stage within the region of production and the subsequent delivery by the packer, as well as at import and export stage, of at least 6,2^oBrix or an average dry matter content of 15 %,
at all other marketing stages, of at least 9,5^oBrix.

C.Classification

Kiwifruit are classified in three classes defined below.

(i)Extra Class

Kiwifruit in this class must be of superior quality. They must be well-developed and have all the characteristics and the colouring typical of the variety.

The ratio of the minimum/maximum diameter of the fruit measured at the equatorial section must be 0,8 or greater.

(ii)Class I

Kiwifruit in this class must be of good quality. They must be characteristic of the variety.

They must be firm and the flesh must be perfectly sound.

The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:

a slight defect in shape (but free of swelling or malformations),
a slight defect in colouring,
superficial skin defects, provided the total area affected does not exceed 1 cm²,
small “Hayward mark” like longitudinal lines without protuberance.

The ratio of the minimum/maximum diameter of the fruit measured at the equatorial section must be 0,7 or greater.

(iii)Class II

This class includes kiwifruit which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.

The fruit must be reasonably firm and the flesh should not show any serious defects.

The following defects may be allowed provided the kiwifruit retain their essential characteristics as regards the quality, the keeping quality, and presentation:

defects in shape,
defects in colouring,
skin defects such as small healed cuts or scarred/grazed tissue, provided that the total area affected does not exceed 2 cm²,
several more pronounced “Hayward marks” with a slight protuberance,
slight bruising.

III.PROVISIONS CONCERNING SIZING

Size is determined by the weight of the fruit.

The minimum weight for “Extra” Class is 90 g, for Class I is 70 g and for Class II is 65 g.

The difference in weight between the largest and the smallest fruit in each package must not exceed:

10 g for fruit weighing up to 85 g,
15 g for fruit weighing between 85 g and 120 g,
20 g for fruit weighing between 120 g and 150 g,
40 g for fruit weighing 150 g or more.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)Extra Class

5 % by number or weight of kiwifruit not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.

(ii)Class I

10 % by number or weight of kiwifruit not satisfying the requirements of the class, but meeting those of Class II or, exceptionally, coming within the tolerances of that class.

(iii)Class II

10 % by number or weight of kiwifruit satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting, severe bruising or any other deterioration rendering it unfit for consumption.

B.Size tolerances

For all classes: 10 % by number or weight of kiwifruit not satisfying the requirements as regards the minimum weight and/or the size range specified.

However, the fruit must be of a size immediately below or above the size indicated or, in the case of the smallest size, they must not weigh less than 85 g in “Extra” Class, 67 g in Class I and 62 g in Class II.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only kiwifruit of the same origin, variety, quality and size.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The kiwifruit must be packed in such a way as to protect the produce properly.

The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly of paper or stamps, bearing trade specifications is allowed provided the printing or labelling has been done with non — toxic ink or glue.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

Packages must be free of all foreign matter.

C.Presentation

In “Extra” Class, the fruit must be presented separately from one another, and be regularly arranged on one layer.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:

A.Identification

The name and the address of the packer and/or the dispatcher.

This mention may be replaced:

for all packages with the exception of pre — packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre — packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“Kiwifruit”, “Actinidia” or equivalent denomination, if the contents are not visible from the outside,
name of the variety (optional).

C.Origin of produce

Country of origin and, optionally, district where grown, or national, regional or local place name.

D.Commercial specifications

Class,
size expressed by the minimum and maximum weight of the fruit,
number of fruit (optional).

E.Official control mark (optional)

Packages need not bear the particulars mentioned in the first subparagraph, when they contain sales packages, clearly visible from the outside, and all bearing these particulars. These packages shall be free from any indications such as could mislead. When these packages are palletised, the particulars shall be given on a notice placed in an obvious position on at least two sides of the pallet.

PART 4:MARKETING STANDARD FOR LETTUCES, CURLED-LEAVED ENDIVES AND BROAD-LEAVED (BATAVIAN) ENDIVES

I.DEFINITION OF PRODUCE

This standard applies to:

lettuces of varieties (cultivars) grown from:
- Lactuca sativa L. var. capitata L. (head (cabbage) lettuces including crisphead and “Iceberg” type lettuces).
- Lactuca sativa L. var. longifolia Lam. (Cos or Romaine lettuces),
- Lactuca sativa L. var. crispa L. (leaf lettuces) and
- crosses of these varieties,
curled-leaved endives of varieties (cultivars) grown from Cichorium endivia L. var. crispum Lam.,
broad-leaved (Batavian) endives (escaroles) of varieties (cultivars) grown from Cichorium endivia L. var. latifolium Lam.,

to be supplied fresh to the consumer.

This standard does not apply to produce for industrial processing, produce presented as individual leaves or lettuces in pots.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements for products after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, the produce must be:

intact,
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean and trimmed, i.e. practically free from all earth or other growing medium and practically free of any visible foreign matter,
fresh in appearance,
turgescent,
practically free from pests,
practically free from damage caused by pests,
not running to seed,
free of abnormal external moisture,
free of any foreign smell and/or taste.

In the case of lettuce, a reddish discolouration, caused by low temperature during growth, is allowed, unless it seriously affects the appearance of the produce.

The roots must be cut close to the base of the outer leaves and the cut must be neat.

The produce must be of normal development.

The development and condition of the produce must be such as to enable it:

to withstand transport and handling, and
to arrive in a satisfactory condition at the place of destination.

B.Classification

Products are classified in two classes defined below:

(i)Class I

Produce in this class must be of good quality. It must be characteristic of the variety or commercial type, especially the colour.

The produce must also be:

well formed,
firm, taking into account the cultivation methods and the type of produce,
free from damage or deterioration impairing edibility,
free from frost damage.

Head lettuces must have a single well-formed heart. However, in the case of head lettuces grown under protection, the heart may be small.

Cos lettuces must have a heart, which may be small.

The centre of curled-leaved endives and broad-leaved (Batavian) endives must be yellow in colour.

(ii)Class II

This class includes produce which does not qualify for inclusion in Class I, but satisfies the minimum requirements specified above.

The produce must be:

reasonably well formed,
free from damage and deterioration which may seriously impair edibility.

The following defects may be allowed provided the produce retain their essential characteristics as regards the quality, the keeping quality and presentation:

slight defects in colouring,
slight damage caused by pests.

Head lettuces must have a heart, which may be small. However, in the case of head lettuces grown under protection, absence of heart is permissible.

Cos lettuces may show no heart.

III.PROVISIONS CONCERNING SIZING

Size is determined by the weight of one unit.

A.Minimum weight

The minimum weight for Classes I and II is:

	Open-grown	Grown under protection
Head lettuces (excluding crisphead and “Iceberg” type lettuces) and Cos or Romaine lettuces (excluding “Little gem” type lettuces)	150 g	100 g
Crisphead and “Iceberg” type lettuces	300 g	200 g
Leaf lettuces and “Little gem” type lettuces	100 g	100 g
Curled-leaved endives and broad-leaved (Batavian) endives	200 g	150 g

B.Uniformity

(a)

Lettuces

In all classes, the difference between the lightest and heaviest units in each package must not exceed:

40 g when the lightest units weighs less than 150 g per unit,
100 g when the lightest unit weighs between 150 g and 300 g per unit,
150 g when the lightest unit weighs between 300 g and 450 g per unit,
300 g when the lightest unit weighs more than 450 g per unit.

(b)

Curled-leaved and broad-leaved (Batavian) endives

In all classes, the difference between the lightest and heaviest units in each package must not exceed 300 g.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)Class I

10 % by number of units not satisfying the requirements of the class but meeting those of Class II or, exceptionally, coming within the tolerances of that class.

(ii)Class II

10 % by number of units satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.

B.Size tolerances

In all classes, 10 % by number of units not satisfying the requirements as regards sizing, but weighing no more than 10 % over or under the size in question.

V.PROVISIONS CONCERNING PRESENTATION

A.Unformity

The contents of each package must be uniform and contain only produce of the same origin, variety or commercial type, quality and size.

However, a mixture of the various types of produce described in this standard may be packed together, provided they are uniform in quality and, for each type concerned, in size. In addition, the types should be clearly distinguishable from one another and the proportion of each type in the package should be visible without damaging the package.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The produce must be packaged in such a way as to protect it properly.

The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.

Packages must be free of all foreign matter.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

C.Presentation

Produce presented in more than one layer may be packed base-to-heart provided the layers or heads are suitably protected or separated.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked and visible from the outside.

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“Lettuces”, “Butterhead lettuces”, “Batavia”, “Crisphead lettuces (Iceberg)”, “Cos lettuces”, “Leaf lettuce” (or, for example and if appropriate, “Oak leaf”, “Lollo bionda”, “Lollo rossa”, “Curled-leaved endives” or “Broad-leaved (Batavian) endives” or other synonyms if the contents are not visible from the outside
“Little gem” where appropriate or other synonyms
An indication “grown under protection”, or other appropriate indication, where appropriate
Name of the variety (optional)
Where different types of produce are mixed together:
- the indication “Mixed salads”, or,
- the indication of each type of produce, and, where the contents are not visible from the outside, the indication of the number of pieces of each type.

C.Origin of produce

Country of origin and, optionally, district where grown, or national, regional or local place name.

D.Commercial specifications

Class
Size, expressed by the minimum weight per unit or the number of units
Net weight (optional),

E.Official control mark (optional)

PART 5:MARKETING STANDARD FOR PEACHES AND NECTARINES

I.DEFINITION OF PRODUCE

This standard applies to peaches and nectarines(5) grown from varieties (cultivars) of Prunus persica Sieb. and Zucc., to be supplied fresh to the consumer, peaches and nectarines for industrial processing being excluded.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements for peaches and nectarines after preparation and packaging.

A.Minimum quality requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, peaches and nectarines must be:

intact,
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
practically free from pests,
practically free from damage caused by pests,
free of abnormal external moisture,
free of any foreign smell and/or taste.

Peaches and nectarines must have been carefully picked.

The development and state of peaches and nectarines must be such as to enable them:

to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.

B.Minimum maturity requirements

The peaches and nectarines must be sufficiently developed and display satisfactory ripeness.

The development and state of maturity of the peaches and nectarines must be such as to enable them to continue their ripening process and to reach a satisfactory degree of ripeness. In order to satisfy this requirement the refractometrix index of the flesh, measured at the middle point of the fruit pulp at the equatorial section must be greater than or equal to 8^o Brix and the firmness must be lower than 6,5 kg measured with a plunger of 8 mm diameter (0,5 cm² at two points of the equatorial section of the fruit.

C.Classification

Peaches and nectarines are classified into three classes as defined below:

(i)“Extra” class

Peaches and nectarines in this class must be of a superior quality. In shape, development and colouring they must be typical of the variety allowing for the district in which they are grown. They must be free from defects with the exception of very slight superficial defects, provided that these do not affect the general appearance of the produce, its quality, keeping quality and presentation in the package.

(ii)Class I

Peaches and nectarines in this class must be of good quality. They must be characteristic of the variety, allowing for the district in which they are grown. However, a slight defect in shape, development or colouring may be allowed.

The flesh must be perfectly sound.

Peaches and nectarines split where the stem is joined to the fruit are excluded.

Slight skin defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package and do not exceed:

1 cm in length for defects of elongated shape,
0,5 cm² in total area for other defects.

(iii)Class II

This class includes peaches and nectarines which do not qualify for inclusion in the higher classes, but which satisfy the minimum requirements specified above.

The flesh should not show any serious defects. Fruits split where the stem is joined to the fruit are allowed only in connection with quality tolerances.

The following skin defects may be allowed provided the peaches and nectarines retain their essential characteristics as regards the quality, the keeping quality and presentation and do not exceed:

2 cm in length for defects of elongated shape,
1,5 cm² in total area for other defects.

III.PROVISIONS CONCERNING SIZING

Size is determined by:

circumference, or
maximum diameter of the equatorial section.

Peaches and nectarines must be graded according to the following scale:

Diameter	Sizing(code)	Circumference
90 mm and above	AAAA	28 cm and above
80 mm and over but under 90 mm	AAA	25 cm and over but under 28 cm
73 mm and over but under 80 mm	AA	23 cm and over but under 25 cm
67 mm and over but under 73 mm	A	21 cm and over but under 23 cm
61 mm and over but under 67 mm	B	19 cm and over but under 21 cm
56 mm and over but under 61 mm	C	17,5 cm and over but under 19 cm
51 mm and over but under 56 mm	D	16 cm and over but under 17,5 cm

The minimum size allowed for the “Extra” class is 17,5 cm (circumference) or 56 mm (diameter).

Size D (51 mm and over but under 56 mm in diameter or 16 cm and over but under 17,5 cm in circumference) is not allowed in the period from 1 July to 31 October.

Sizing is compulsory for all classes.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements for the class indicated.

A.Quality tolerances

(i)“Extra” class

5 % by number or weight of peaches or nectarines not satisfying the requirements of the class, but meeting those of class I or, exceptionally, coming within the tolerances of that class.

(ii)Class I

10 % by number or weight of peaches or nectarines not satisfying the requirements of the class, but meeting those of class II or, exceptionally, coming within the tolerances for that class.

(iii)Class II

10 % by number or weight of peaches or nectarines satisfying neither the requirements of the class nor the minimum requirements, with the exception of fruit affected by rotting, marked bruising or any other deterioration rendering it unfit for consumption.

B.Size tolerances

For all classes, 10 % by number or weight of peaches or nectarines up to 1 cm more or less than the size stated on the package in the case of sizing by circumference and up to 3 mm more or less in the case of sizing by diameter. However, for fruit in the smallest size, this tolerance shall apply only to peaches or nectarines of a size smaller by not more than 6 mm (circumference) or 2 mm (diameter) than the specified minimum size.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only peaches or nectarines of the same origin, variety, quality, degree of ripeness and size, and for the “Extra” class, the contents must also be uniform in colour.

The visible part of the contents of each package must be representative of the entire contents.

B.Packaging

The peaches or nectarines must be packed in such a way as to protect the produce properly.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects

Packages must be free of all foreign matter.

C.Presentation

The peaches and nectarines may be presented:

in small unit packages,
in a single layer, in the case of “Extra” class; each individual fruit in this class must be separated from its neighbours.

In classes I and II:

in one or two layers, or
in no more than four layers when the fruit is placed in rigid pockets so arranged that they do not rest on the fruit in the layer immediately below.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked and visible from the outside:

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“Peaches” or “nectarines”, if the contents are not visible from the outside,
colour of the flesh,
name of the variety (optional).

C.Origin of produce

Country of origin and, optionally, district where grown, or national, regional or local place name.

D.Commercial specifications

class,
size expressed in minimum and maximum diameters or minimum and maximum circumference or according to the coding set out in Section III “Provisions concerning sizing”,
number of units (optional),
minimum sugar content, measured by refractometer and expressed in Brix degrees (optional),
maximum firmness, measured by penetrometer and expressed in kg/0,5 cm² (optional),

E.Official control mark (optional)

PART 6:MARKETING STANDARD FOR PEARS

I.DEFINITION OF PRODUCE

This standard applies to pears of varieties (cultivars) grown from Pyrus communis L. to be supplied fresh to the consumer, pears for industrial processing being excluded.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements of pears, after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, pears must be:

intact,
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
practically free from pests,
practically free from damage caused by pests,
free of abnormal external moisture,
free of any foreign smell and/or taste.

In addition, they must have been carefully picked.

The development and condition of the pears must be such as to enable them:

to continue their ripening process and to reach the degree of ripeness required in relation to the varietal characteristics,
to withstand transport and handling and
to arrive in satisfactory condition at the place of destination.

B.Classification

Pears are classified in three classes defined below.

(i)“Extra” Class

Pears in this class must be of superior quality. In shape, size and colouring, they must be characteristic of the variety and the stalk must be present and intact.

The flesh must be perfectly sound, and the skin free from rough russeting(6).

They must be free from defects with the exception of very slight superficial defects provided these do not affect the general appearance of the fruit, the quality, the keeping quality and presentation in the package.

Pears must not be gritty.

(ii)Class I

Pears in this class must be of good quality. In shape, size and colouring, they must be characteristic of the variety.

The flesh must be perfectly sound, and the skin free from rough russeting(6).

The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:

a slight defect in shape,
a slight defect in development,
a slight defect in colouring,
slight skin defects which must not extend over more than:
- 2 cm in length for defects of elongated shape,
- 1 cm² of total surface area for other defects, with the exception of scab (Venturia pirina and V. inaequalis), which must not extend over more than 0,25 cm² of total surface area,
- slight bruising not exceeding 1 cm² of total surface area and not discoloured.

The stalk may be slightly damaged.

Pears must not be gritty.

(iii)Class II

This class includes pears which do not qualify for inclusion in the higher classes but satisfy the minimum requirements specified above.

The flesh must be free from major defects.

The following defects are allowed provided the fruit retains its essential characteristics as regards the quality, the keeping quality and presentation:

defects in shape,
defects in development,
defects in colouring,
slight rough russeting(6), skin defects which must not extend over more than:
- 4 cm in length for defects of elongated shape,
- 2,5 cm² of total surface area for other defects, with the exception of scab (Venturia pirina and V. inaequalis), which must not extend over more than 1 cm² of total surface area,
- slight bruising not exceeding 1 cm² of total surface area which may be slightly discoloured.

III.PROVISIONS CONCERNING SIZING

Size is determined by maximum diameter of the equatorial section.

A minimum size is required for each class as follows:

	“Extra”	Class I	Class II
^a A non-exhaustive list of large fruited and summer pear varieties is included in the Appendix to this standard
Large fruited varieties^a	60 mm	55 mm	55 mm
Other varieties	55 mm	50 mm	45 mm

Exceptionally, and for summer pears included in the Appendix to this standard, no minimum size will be laid down for consignments harvested and dispatched between 10 June and 31 July (inclusive) of any year.

To ensure there is uniformity of size within a package, the difference in diameter between fruit in the same package shall be limited to:

5 mm for Extra Class fruit and for Class I and II fruit packed in rows and layers,
10 mm for Class I fruit packed loose in the package or in sales packages.

There is no sizing uniformity limit for Class II fruit packed loose in the package or in sales packages.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)“Extra” Class

5 per cent by number or weight of pears not satisfying the requirements of the class, but meeting those of Class I or, exceptionally, coming within the tolerances of that class.

(ii)Class I

10 per cent by number or weight of pears not satisfying the requirements of the class, but meeting those of Class II, or exceptionally, coming within the tolerances of that class. However, pears without stalks are not included in this tolerance.

(iii)Class II

10 per cent by number or weight of pears satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.

Within this tolerance, a maximum of 2 per cent by number or weight of fruit is allowed which shows the following defects:

slight damage or unhealed cracks,
very slight traces of rot,
presence of internal feeding pests and/or damage to the flesh caused by pests.

B.Size tolerances

For all classes:

10 per cent by number or weight of fruit corresponding to the size immediately above or below that marked on the package, with, for fruit classified in the smallest grade allowed a maximum variation of 5 mm below the minimum.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only pears of the same origin, variety, quality and size (if sized) and the same degree of ripeness.

In the case of the “Extra” Class, uniformity also applies to colouring.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The pears must be packed in such a way as to protect the produce properly.

Packages must be free of all foreign matter.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

C.Presentation

“Extra” Class fruit must be packed in rows and layers.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“Pears” if the contents are not visible from the outside,
name of the variety.

C.Origin of produce

Country of origin and, optionally, district where grown, or national, regional or local place name.

D.Commercial specifications

Class,
size or, for fruit packed in rows and layers, number of units.

If identification is by the size, this should be expressed:

(a)

for produce subject to the uniformity rules, as minimum and maximum diameters;

(b)

for produce not subject to the uniformity rules as the diameter of the smallest fruit in the package followed by “and over” or equivalent denomination or, if appropriate, by the diameter of the largest fruit in the package.

E.Official control mark (optional)

Appendix

1.Size criteria

Large fruited variety

Summer pear, for which no minimum size is required in respect of consignments harvested and dispatched between 10 June and 31 July of any year.

2.Non-exhaustive list of large fruited and summer pear varieties classified according to their size criteria

Small fruited and other varieties which do not appear in the list may be marketed as long as they meet the size requirements for other varieties as described in section III of the standard.

Some of the varieties listed in the following may be marketed under trade names for which trademark protection has been sought or obtained in one or more countries. The first and second columns of the table hereunder do not intend to include such trade names. Reference to known trademarks have been included in the third column for information only.

Variety	Synonyms	Trade names	Size
Abbé Fétel	Abate Fetel		L
Abugo o Siete en Boca			SP
Akςa			SP
Alka			L
Alsa			L
Amfora			L
Alexandrine Douillard			L
Bergamotten			SP
Beurré Alexandre Lucas	Lucas		L
Beurré Bosc	Bosc, Beurré d'Apremont, Empereur Alexandre, Kaiser Alexandre		L
Beurré Clairgeau			L
Beurré d'Arenberg	Hardenpont		L
Beurré Giffard			SP
Beurré précoce Morettini	Morettini		SP
Blanca de Aranjuez	Agua de Aranjuez, Espadona, Blanquilla		SP
Carusella			SP
Castell	Castell de Verano		SP
Colorée de juillet	Bunte Juli		SP
Comice rouge			L
Concorde			L
Condoula			SP
Coscia	Ercolini		SP
Curé	Curato, Pastoren, Del cura de Ouro, Espadon de invierno, Bella de Berry, Lombardia de Rioja, Batall de Campana		L
D'Anjou			L
Dita			L
D.Joaquina	Doyenné de juillet		SP
Doyenné d'hiver	Winterdechant		L
Doyenné du comice	Comice, Vereinsdechant		L
Erika			L
Etrusca			SP
Flamingo			L
Forelle			L
Général Leclerc		Amber Grace^TM	L
Gentile			SP
Golden Russet Bosc			L
Grand champion			L
Harrow Delight			L
Jeanne d'Arc			L
Josephine			L
Kieffer			L
Leonardeta	Mosqueruela, Margallon, Colorada de Alcanadre, Leonarda de Magallon		SP
Lombacad		Cascade^®	L
Moscatella			SP
Mramornaja	Mramornoje		L
Mustafabey			SP
Packham's Triumph	Williams d'Automne		L
Passe Crassane	Passa Crassana		L
Perita de San Juan			SP
Pérola			SP
Pitmaston	Williams Duchesse		L
Précoce de Trévoux	Trévoux		SP
Président Drouard			L
Rosemarie			L
Santa Maria	Santa Maria Morettini		SP
Spadoncina	Agua de Verano, Agua de Agosto		SP
Taylors Gold			L
Triomphe de Vienne			L
Williams Bon Chrétien	Bon Chrétien, Bartlett, Williams, Summer Bartlett		L

PART 7:MARKETING STANDARD FOR STRAWBERRIES

I.DEFINITION OF PRODUCE

This standard applies to strawberries of varieties (cultivars) grown from the genus Fragaria L. to be supplied fresh to the consumer, strawberries for industrial processing being excluded.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements of strawberries after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, the strawberries must be:

intact,
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
fresh in appearance, but not washed,
practically free from pests,
practically free from damage caused by pests,
with the calyx (except in the case of wild strawberries); the calyx and the stalk (if present) must be fresh and green,
free of abnormal external moisture,
free of any foreign smell and/or taste.

The strawberries must have been carefully picked.

They must be sufficiently developed and display satisfactory ripeness. The development and the condition must be such as to enable them:

to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.

B.Classification

The strawberries are classified in three classes defined below:

(i)“Extra” Class

The strawberries in this class must be of superior quality. They must be characteristic of the variety.

They must be bright in appearance, allowing for the characteristics of the variety.

They must be free from soil.

(ii)Class I

Strawberries in this class must be of good quality. In colouring and shape, they must be characteristic of the variety.

The following slight defects, however, may be allowed provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:

slight defect of shape,
a white patch, not exceeding one tenth of the surface area of the fruit,
slight superficial pressure marks.

They must be practically free from soil.

(iii)Class II

This class includes strawberries which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.

The following defects may be allowed provided the strawberries retain their essential characteristics as regards the quality, the keeping quality and presentation:

defects of shape,
a white patch not exceeding one fifth of the surface area of the fruit,
slight dry bruising not likely to spread,
slight traces of soil.

III.PROVISIONS CONCERNING SIZING

Size is determined by the maximum diameter of the equatorial section.

Strawberries must be of the following minimum sizes:

“Extra” Class: 25 mm,
Classes I and II: 18 mm.

There is no minimum size for wild strawberries.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)“Extra” Class

5 % by number or weight of strawberries not satisfying the requirements of the class but meeting those of Class I or, exceptionally, coming within the tolerances of that class. Of these 5 % not more than 2 % in total may consist of spoilt fruit.

(ii)Class I

10 % by number or weight of strawberries not satisfying the requirements of the class but meeting those of Class II or, exceptionally, coming within the tolerances of that class. Of these 10 %, not more than 2 % in total may consist of spoilt fruit.

(iii)Class II

10 % by number or weight of strawberries satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting, severe bruising or any other deterioration rendering it unfit for consumption. Of these 10 %, not more than 2 % in total may consist of spoilt fruit.

B.Size tolerances

For all classes: 10 % by number or weight of strawberries not conforming to the minimum size.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only strawberries of the same origin, variety and quality.

In the “Extra” Class, strawberries — with the exception of wood strawberries — must be particularly uniform and regular with respect to degree of ripeness, colour and size. In Class I, strawberries may be less uniform in size.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The strawberries must be packed in such a way as to protect the produce properly.

Fruit in the “Extra” Class must be particularly well presented.

Packages must be free of all foreign matter.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“Strawberries”, if the contents of the package are not visible from the outside.
Name of the variety (optional).

C.Origin of produce

Country of origin and, optionally, district where grown or national, regional or local place name.

D.Commercial specifications

Class.

E.Official control mark (optional)

PART 8:MARKETING STANDARD FOR SWEET PEPPERS

I.DEFINITION OF PRODUCE

This standard applies to sweet peppers of varieties (cultivars) grown from Capsicum annuum L. var. annuum, to be supplied fresh to the consumer, sweet peppers for industrial processing being excluded.

According to their shape a distinction is made for four commercial types:

elongated sweet peppers (pointed),
square sweet peppers (blunt),
square tapering sweet peppers (peg top),
flat sweet peppers (tomato peppers).

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements for sweet peppers after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, the sweet peppers must be:

intact,
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
fresh in appearance,
practically free from pests,
practically free from damage caused by pests,
well-developed,
free of damage caused by frost,
free of unhealed injuries,
(ii) ],
with peduncles attached,
free of abnormal external moisture,
free of any foreign smell and/or taste.

The development and condition of the sweet peppers must be such as to enable them to:

withstand transport and handling, and
arrive in satisfactory condition at the place of destination.

B.Classification

Sweet peppers are classified in two classes, defined below:

(i)Class I

Sweet peppers in this class must be of good quality. They must be characteristic of the variety and/or commercial type as regards development, shape and colour with due regard to the degree of ripeness.

They must be:

firm,
practically free of blemishes.

The peduncle may be slightly damaged or cut with the calyx intact.

(ii)Class II

This class includes sweet peppers which do not qualify for inclusion in Class I but satisfy the minimum requirements specified above.

The following defects may be allowed provided the peppers retain their essential characteristics as regards the quality, keeping quality and presentation:

defects in shape and development,
sunburn or slight healed injuries, with a limit of 2 cm in length for defects of elongated shape, and 1 cm² of the total area for other defects,
slight dry superficial cracks not exceeding an overall cumulative length of 3 cm.

They may be less firm without being withered.

The peduncle may be damaged or cut.

III.PROVISIONS CONCERNING SIZING

Size is determined by the shoulder diameter (width) of the sweet peppers. In the case of flat sweet peppers (tomato peppers) the term “width” means the maximum equatorial diameter.

For sized sweet peppers, the difference in diameter between the largest and smallest sweet pepper in the same package may not exceed 20 mm.

The width of sweet peppers may not be less than:

elongated sweet peppers (pointed): 20 mm
square sweet peppers (blunt) and square tapering sweet peppers (peg-top): 40 mm
flat sweet peppers (tomato peppers): 55 mm

Sizing is not compulsory for Class II, subject to the minimum sizes.

The size requirements shall not apply to miniature produce(7).

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)Class I

10 % by number or weight of sweet peppers not satisfying the requirements of the class, but meeting those of Class II or, exceptionally, coming within the tolerances of that class.

(ii)Class II

10 % by number or weight of sweet peppers satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.

B.Size tolerances

(i)Class I

10 % by number or weight of sweet peppers not conforming to the sizes identified within a margin of ± 5 mm including no more than 5 % of sweet peppers below the minimum size laid down.

(ii)Class II

Sized sweet peppers
10 % by number or weight of sweet peppers not conforming to the sizes identified within a margin of ± 5 mm including no more than 5 % of sweet peppers below the minimum size laid down.
Unsized sweet peppers
5 % by number or weight of sweet peppers up to 5 mm smaller than the minimum size laid down.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only sweet peppers of the same origin, variety or commercial type, quality, size (if sized) and, in the case of Class I, of appreciably the same degree of ripeness and colouring.

However, a mixture of sweet peppers of different colours may be packed together, provided they are uniform in origin, quality, commercial type and size (if sized).

Consumer packages of a net weight not exceeding one kilo, may contain mixtures of sweet peppers of different colours and/or commercial types, provided they are uniform in quality, and for each colour and/or commercial type concerned, in origin.

In the case of sized produce, elongated sweet peppers should be sufficiently uniform in length.

Miniature sweet peppers must be reasonably uniform in size. They may be mixed with other miniature products of a different type and origin.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The sweet peppers must be packed in such a way as to protect the produce properly.

The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps bearing trade specifications is allowed, provided the printing or labelling has been done with non-toxic ink or glue.

packages must be free of all foreign matter.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars, in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations),
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

If the contents are not visible from the outside:

“Sweet peppers”,
colour,
commercial type (“elongated”, “square blunt”, “square tapering”, “flat”) or name of the variety.

In the case of packages or consumer packages containing a mixture of different colours and/or commercial types of sweet pepper:

“Mixed peppers”, or equivalent denomination,
if the contents are not visible from the outside, colours and/or commercial types of the sweet peppers and number of pieces of each of the colours and/or commercial types concerned.

C.Origin of produce

Country of origin and, optionally, district where grown or national, regional or local place name.

In the case of consumer packages containing a mixture of sweet peppers of different colours and/or commercial types of different origins, the indication of each country of origin shall appear next to the name of the colour and/or commercial type concerned.

D.Commercial specifications

Class
Size (if sized) expressed as minimum and maximum diameters or the mark “unsized” where appropriate
Where appropriate, “Mini peppers”, “Baby peppers”, or other appropriate term for miniature produce. Where several types of miniature produce are mixed in the same package, all products and their respective origins must be mentioned.

E.Official control mark (optional)

PART 9:MARKETING STANDARD FOR TABLE GRAPES

I.DEFINITION OF PRODUCE

This standard applies to table grapes of varieties (cultivars) grown from Vitis vinifera L. to be supplied fresh to the consumer, table grapes for industrial processing being excluded.

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements for table grapes after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, bunches and berries must be:

sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
practically free from pests,
practically free from damage caused by pests,
free of abnormal external moisture,
free of any foreign smell and/or taste.

In addition, berries must be:

intact,
well formed,
normally developed.

Pigmentation due to sun is not a defect.

Bunches must have been carefully picked.

The juice of the berries shall have a refractometric index of at least:

12^o Brix for the Alphonse Lavallée, Cardinal and Victoria varieties,
13^o Brix for all other seeded varieties,
14^o Brix for all seedless varieties.

In addition, all varieties must have satisfactory sugar/acidity ratio levels.

The development and condition of the table grapes must be such as to enable them:

to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.

B.Classification

The table grapes are classified into three classes defined below:

i)“Extra” class

Table grapes in this class must be of superior quality. In shape, development and colouring the bunches must be typical of the variety, allowing for the district in which they are grown, and have no defects. Berries must be firm, firmly attached, evenly spaced along the stalk and have their bloom virtually intact.

ii)Class I

Table grapes in this class must be of good quality. In shape, development and colouring the bunches must be typical of the variety, allowing for the district in which they are grown. Berries must be firm, firmly attached and, as far as possible, have their bloom intact. They may, however, be less evenly spaced along the stalk than in the “Extra” class.

The following slight defects, however; may be allowed, provided these do not affect the general appearance of the produce, the quality, the keeping quality, and presentation in the package:

slight defects in shape,
slight defects in colouring,
very slight sun-scorch affecting the skin only.

iii)Class II

This class includes table grapes which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.

The bunches may show slight defects in shape, development and colouring, provided these do not impair the essential characteristics of the variety, allowing for the district in which they are grown.

The berries must be sufficiently firm and sufficiently attached, and, where possible, still have their bloom. They may be less evenly spaced along the stalk than in Class I.

The following defects are allowed provided the table grapes retain their essential characteristics as regards the quality, the keeping quality and presentation:

defects in shape,
defects in colouring,
slight sun-scorch affecting the skin only,
slight bruising,
slight skin defects.

III.PROVISIONS CONCERNIG SIZING

Size is determined by the weight of the bunch.

The following minimum size requirements per bunch are defined for table grapes grown under glass and for open-grown table grapes, large-berry or small-berry varieties respectively.

	Table grapes grown under glass(if mentioned on the label)	Open grown table grapes
	Table grapes grown under glass(if mentioned on the label)	All varieties except small-berry varieties listed in the Appendix	Small-berry varieties listed in the Appendix
Extra class	300 g	200 g	150 g
Class I	250 g	150 g	100 g
Class II	150 g	100 g	75 g

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

i)“Extra” class

5 % by weight of bunches not satisfying the requirements of the class, but meeting those for Class I or, exceptionally, coming within the tolerances of that class.

ii)Class I

10 % by weight of bunches not satisfying the requirements of the class, but meeting those of Class II or, exceptionally, coming within the tolerances for that class.

iii)Class II

10 % by weight of bunches satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting or any other deterioration rendering it unfit for consumption.

B.Size tolerances

i)“Extra” Class and Class I

10 % by weight of bunches not satisfying the size requirements of the class, but meeting those of the class immediately below.

ii)Class II

10 % by weight of bunches not satisfying the size requirements of the class but weighing not less than 75 g.

iii)“Extra” class and Classes I and II

In each consumer package not exceeding 1 kg net weight, one bunch weighing less than 75 g is allowed to adjust the weight, provided the bunch meets all other requirements of the specified class.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only bunches of the same origin, variety, quality and degree of ripeness.

In the case of grapes packed in small consumer packages of a net weight not exceeding 1 kg, uniformity of variety and origin is not required.

In the case of the “Extra” Class, the bunches must be of more or less identical size and colouring.

The inclusion in each package of bunches of different colours for decorative purposes shall be allowed in the case of the variety Chasselas.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The table grapes must be packed in such a way as to protect the produce properly.

In the case of the “Extra” Class, the bunches must be packed in a single layer.

The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps, bearing trade specifications is allowed provided the printing or labelling has been done with non-toxic ink or glue.

Packages must be free of all foreign matter, although a fragment of vine shoot no more than 5 cm in length may be left on the stem of the bunch as a form of special presentation.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked, and visible from the outside:

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“Table Grapes”, if the contents are not visible from the outside,
name of the variety or, where applicable, varieties,
“under glass”, where applicable.

C.Origin of produce

Country (or, where applicable, countries) of origin and, optionally, district where grown, or national, regional or local place name.

D.Commercial specifications

Class.

E.Official control mark (optional)

Appendix

Exhaustive list of small-berry varieties

Variety	Other names under which the variety is known
Admirable de Courtiller	Admirable, Csiri Csuri
Albillo	Acerba, Albuela, Blanco Ribera, Cagalon
Angelo Pirovano	I. Pirovano 2
Annamaria	I. Ubizzoni 4
Baltali
Beba	Beba de los Santos, Eva
Catalanesca	Catalanesa, Catalana, Uva Catalana
Chasselas blanc	Chasselas doré, Fendant, Franceset, Franceseta, Gutedel, Krachgutedel, White van der Laan
Chasselas rouge	Roter Gutedel
Chelva	Chelva de Cebreros, Guareña, Mantuo, Villanueva
Ciminnita	Cipro bianco
Clairette	Blanquette, Malvoisie, Uva de Jijona
Colombana bianca	Verdea, Colombana de Peccioli
Dehlro
Delizia di Vaprio	I. Pirovano 46 A
Exalta
Flame Seedless	Red Flame
Gros Vert	Abbondanza, St Jeannet, Trionfo dell'Esposizione, Verdal, Trionfo di Gerusalemme
Jaoumet	Madeleine de St Jacques, Saint Jacques
Madeleine	Angevine, Angevine Oberlin, Madeleine Angevine Oberlin, Republicain
Mireille
Molinera	Besgano, Castiza, Molinera gorda
Moscato d'Adda	Muscat d'Adda
Moscato d'Amburgo	Black Muscat, Hambro, Hamburg, Hamburski Misket, Muscat d'Hambourg, Moscato Preto
Moscato di Terracina	Moscato di Maccarese
Œillade	Black Malvoisie, Cinsaut, Cinsault, Ottavianello, Sinso
Panse precoce	Bianco di Foster, Foster's white, Sicilien
Perla di Csaba	Càbski Biser, Julski muskat, Muscat Julius, Perle de Csaba
Perlaut
Perlette
Pizzutello bianco	Aetonychi aspro, Coretto, Cornichon blanc, Rish Baba, Sperone di gallo, Teta di vacca
Precoce de Malingre
Primus	I. Pirovano 7
Prunesta	Bermestia nera, Pergola rossa, Pergolese di Tivoli
Regina dei Vigneti	Königin der Weingärten, Muskat Szölöskertek Kizalyneja, Szölöskertek Kizalyneh, Rasaki ourgarias, Regina Villoz, Reina de las Viñas, Reine des Vignes, I. Mathiasz 140, Queen of the Vineyards
Servant	Servan, Servant di Spagna
Sideritis	Sidiritis
Sultanines	Bidaneh, Kishmich, Kis Mis, Sultan, Sultana, Sultani, Cekirdesksiz, Sultanina bianca, Sultaniye, Thompson Seedless and mutations
Valenci blanc	Valensi, Valency, Panse blanche
Valenci noir	Planta Mula, Rucial de Mula, Valenci negro
Yapincak

PART 10:MARKETING STANDARD FOR TOMATOES

I.DEFINITION OF PRODUCE

This standard applies to tomatoes of the varieties (cultivars) grown from Lycopersicon lycopersicum (L.) Karsten ex Farw./Lycopersicon esculentum Mill. to be supplied fresh to the consumer, tomatoes for industrial processing being excluded.

Tomatoes may be classified in four commercial types:

“round”,
“ribbed”,
“oblong” or “elongated”,
“cherry” tomatoes (including “cocktail” tomatoes).

II.PROVISIONS CONCERNING QUALITY

The purpose of the standard is to define the quality requirements of tomatoes after preparation and packaging.

A.Minimum requirements

In all classes, subject to the special provisions for each class and the tolerances allowed, tomatoes must be:

intact,
sound; produce affected by rotting or deterioration such as to make it unfit for consumption is excluded,
clean, practically free of any visible foreign matter,
fresh in appearance,
practically free from pests,
practically free from damage caused by pests,
free of abnormal external moisture,
free of any foreign smell and/or taste.

In the case of trusses of tomatoes, the stalks must be fresh, healthly, clean, and free from all leaves and any visible foreign matter.

The development and condition of the tomatoes must be such as to enable them:

to withstand transport and handling, and
to arrive in satisfactory condition at the place of destination.

B.Classification

Tomatoes are classified in three classes as defined below:

(i)“Extra” Class

Tomatoes in this class must be of superior quality. They must have firm flesh and must be characteristic of the variety as regards shape, appearance and development.

Their colouring, according to their state of ripeness, must be such as to satisfy the requirements set out in the last subparagraph of paragraph A above.

They must be free from greenbacks and other defects, with the exception of very slight superficial defects, provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package.

(ii)Class I

Tomatoes in this class must be of good quality. They must be reasonably firm and characteristic of the variety.

They must be free of cracks and visible greenbacks. The following slight defects, however, may be allowed, provided these do not affect the general appearance of the produce, the quality, the keeping quality and presentation in the package:

a slight defect in shape and development,
a slight defect in colouring,
slight skin defects,
very slight bruises.

Furthermore, “ribbed” tomatoes may show:

healed cracks not more than 1 cm long,
no excessive protuberances,
a small umbilicus, but no suberisation,
suberisation of the stigma up to 1 cm,
fine blossom scar in elongated form (like a seam), but not longer than two thirds of the greatest diameter of the fruit.

(iii)Class II

This class includes tomatoes which do not qualify for inclusion in the higher classes, but satisfy the minimum requirements specified above.

They must be reasonably firm (but may be slightly less firm than in Class I) and must not show unhealed cracks.

The following defects may be allowed, provided the tomatoes retain their essential characteristics as regards the quality, the keeping quality and presentation:

defects in shape, development and colouring,
skin defects or bruises, provided the fruit is not seriously affected,
healed cracks not more than 3 cm in length for round, ribbed or oblong tomatoes.

Furthermore, “ribbed” tomatoes may show:

more pronounced protuberances than allowed in Class I, but without being misshapen,
an umbilicus,
suberisation of the stigma up to 2 cm²,
fine blossom scar in elongated form (like a seam).

III.PROVISIONS CONCERNING SIZING

Size is determined by the maximum diameter of the equatorial section. The following provisions shall not apply to “cherry” tomatoes.

A.Minimum size

For tomatoes classified in the “Extra” Class and Classes I and II, the minimum size is set at:

35 mm for “round” and “ribbed” tomatoes,
30 mm for “oblong” tomatoes.

B.Sizing scale

The tomatoes are graded according to the following sizing scale:

30 mm and over but under 35 mm(8),
35 mm and over but under 40 mm,
40 mm and over but under 47 mm,
47 mm and over but under 57 mm,
57 mm and over but under 67 mm,
67 mm and over but under 82 mm,
82 mm and over but under 102 mm,
102 mm and over.

Observance of the sizing scale is compulsory for “Extra” Class and Class I tomatoes.

The sizing scale does not apply to trusses of tomatoes.

IV.PROVISIONS CONCERNING TOLERANCES

Tolerances in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the class indicated.

A.Quality tolerances

(i)“Extra” Class

5 % by number or weight of tomatoes not satisfying the requirements of the class but meeting those of Class I or, exceptionally, coming within the tolerances of that class.

(ii)Class I

10 % by number or weight of tomatoes not satisfying the requirements of the class but meeting those of Class II or, exceptionally, coming within the tolerances of that class.
In the class of trusses of tomatoes, 5 % by number or weight of tomatoes detached from the stalk.

(iii)Class II

10 % by number or weight of tomatoes satisfying neither the requirements of the class nor the minimum requirements, with the exception of produce affected by rotting, marked bruising or any other deterioration rendering it unfit for consumption.
In the case of trusses of tomatoes, 10 % by number or weight of tomatoes detached from the stalk.

B.Size tolerances

For all classes: 10 % by number or weight of tomatoes conforming to the size immediately above or below that specified, with a minimum of 33 mm for “round” and “ribbed” tomatoes and 28 mm for “oblong” tomatoes.

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

The contents of each package must be uniform and contain only tomatoes of the same origin, variety or commercial type, quality and size (if sized).

The ripeness and colouring of tomatoes in the “Extra” Class and Class I must be practically uniform. In addition, the length of “oblong” tomatoes must be sufficiently uniform.

The visible part of the contents of the package must be representative of the entire contents.

B.Packaging

The tomatoes must be packed in such a way as to protect the produce properly.

The materials used inside the package must be new, clean and of a quality such as to avoid causing any external or internal damage to the produce. The use of materials, particularly paper or stamps, bearing trade specifications is allowed, provided the printing or labelling has been done with non-toxic ink or glue.

Packages must be free of all foreign matter.

Stickers individually affixed on product shall be such as, when removed, neither to leave visible traces of glue, nor to lead to skin defects.

C.Presentation

Tomatoes may be presented as follows:

(i)

as individual fruits, with or without calyx and short stalk;

(ii)

as trusses of tomatoes, i.e. the tomatoes are presented as whole inflorescence or part thereof, each inflorescence or part thereof comprising at least the following number of fruits:

three fruits (two fruits in prepackaging), or
in the case of trusses of “cherry” tomatoes, six fruits (four fruits in prepackaging).

VI.PROVISIONS CONCERNING MARKING

Each package must bear the following particulars in letters grouped on the same side, legibly and indelibly marked and visible from the outside:

A.Identification

The name and the address of the packer and/or the dispatcher

This mention may be replaced:

for all packages with the exception of pre-packages, by the officially issued or accepted code mark representing the packer and/or the dispatcher, indicated in close connection with the reference “Packer and/or Dispatcher” (or equivalent abbreviations);
for pre-packages only, by the name and the address of a seller established within the Community indicated in close connection with the mention “Packed for:” or an equivalent mention. In this case, the labelling shall also include a code representing the packer and/or the dispatcher. The seller shall give all information deemed necessary by the inspection body as to the meaning of this code.

B.Nature of produce

“tomatoes” or “trusses of tomatoes” and the commercial type if the contents are not visible from the outside. These details must always be provided for “cherry” (or “cocktail”) tomatoes, whether or not in trusses,
name of the variety (optional).

C.Origin of produce

country of origin and, optionally, district where grown, or national, regional or local place name.

D.Commercial specifications

class
size expressed as minimum and maximum diameters (if sized) or the word “unsized” where appropriate.
minimum sugar content, measured by refractometer and expressed in Brix degrees (optional).

E.Official control mark (optional)

(1)

Due to varietal characteristics of the Fuji variety and its mutants concerning maturity at harvest, radial watercore is permitted provided it is contained within the vascular bundles of each fruit.

(2)

To that end, they must show satisfactory soluble solids content and degree of firmness.

(3)

The criteria for colouring and russetting are given in the appendix to this standard, as well as a non-exhaustive list of the varieties concerned by each criteria.

(4)

The use of preserving agents or any other chemical substance liable to leave a foreign smell on the skin of the fruit is permitted where it is compatible with the applicable Community provisions.

(5)

This text applies to all varieties grown from Prunus persica Sieb. and Zucc., being peaches or nectarines or similar with attached (clingstones) or unattached stone and smooth or rough skin.

(6)

This does not apply when this russeting is a characteristic of the variety.

(7)

Miniature product means a variety or cultivar of sweet pepper, obtained by plant breeding and/or special cultivation techniques, excluding sweet peppers of non-miniature varieties which have not fully developed or are of inadequate size. All other requirements of the standard must be met.

(8)

Only for “oblong” tomatoes.

Verdelli and Primofiore lemons:	20 %
Other lemons:	25 %

legislation.gov.uk

Search Legislation

Commission Regulation (EC) No 1221/2008 (repealed)Show full title

You are here:

What Version

Opening Options

More Resources

Revised version PDFs

Legislation originating from the EU

This item of legislation originated from the EU

Status:

“ANNEX IMARKETING STANDARDS REFERRED TO IN ARTICLE 2a

PART AGeneral Marketing standard

1.Minimum quality requirements

2.Minimum maturity requirements

3.Tolerance

4.Marking of origin of produce

PART BSPECIFIC MARKETING STANDARDS

PART 1:MARKETING STANDARD FOR APPLES

I.DEFINITION OF PRODUCE

II.PROVISIONS CONCERNING QUALITY

A.Minimum requirements

B.Classification

(i)“Extra” class

(ii)Class I

(iii)Class II

III.PROVISIONS CONCERNING SIZING

IV.PROVISIONS CONCERNING TOLERANCES

A.Quality tolerances

(i)“Extra” class

(ii)Class I

(iii)Class II

B.Size tolerances

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

B.Packaging

C.Presentation

VI.PROVISIONS CONCERNING MARKING

A.Identification

B.Nature of produce

C.Origin of produce

D.Commercial specifications

E.Official control mark (optional)

Appendix

1.Colouring criteria, colouring groups and codes

2.Russeting criteria

3.Non-exhaustive list of apple varieties classified according to their colouring and russeting criteria

PART 2:MARKETING STANDARD FOR CITRUS FRUITS

I.DEFINITION OF PRODUCE

II.PROVISIONS CONCERNING QUALITY

A.Minimum requirements

B.Maturity requirements

(i)Lemons

(ii)Mandarins

(iii)Oranges

C.Classification

(i)“Extra” Class

(ii)Class I

(iii)Class II

III.PROVISIONS CONCERNING SIZING

A.Minimum size

B.Size scales

C.Uniformity

IV.PROVISIONS CONCERNING TOLERANCES

A.Quality tolerances

(i)“Extra” Class

(ii)Class I

(iii)Class II

B.Size tolerances

V.PROVISIONS CONCERNING PRESENTATION

A.Uniformity

B.Packaging

C.Presentation

VI.PROVISIONS CONCERNING MARKING

A.Identification

B.Nature of produce

C.Origin of produce

D.Commercial specifications

E.Official control mark (optional)

PART 3:MARKETING STANDARD FOR KIWIFRUITS