Commission Regulation (EC) No 1235/2008Show full title

[F1 Article 13 U.K. Certificate of inspection

1. The release for free circulation in the Union of a consignment of products referred to in Article 1(2) of Regulation (EC) No 834/2007 and imported in accordance with Article 33 of that Regulation shall be conditional on:

(a) the submission of an original certificate of inspection to the relevant Member State's competent authority;

(b) the verification of the consignment and the endorsement of the certificate of inspection by the relevant Member State's competent authority; and

(c) the indication of the number of the certificate of inspection in the customs declaration for release for free circulation as referred to in Article 158(1) of Regulation (EU) No 952/2013 of the European Parliament and of the Council (1) .

The verification of the consignment and the endorsement of the certificate of inspection shall be carried out by the relevant Member State's competent authority in that Member State where the consignment is released for free circulation in the Union.

Member States shall designate the points of entry in their territory and inform the Commission of the designated points of entry.

2. The certificate of inspection shall be issued by the relevant control authority or control body, endorsed by the relevant Member State's competent authority and completed by the first consignee on the basis of the model and the notes set out in Annex V and using the electronic Trade Control and Expert System (TRACES) established by Commission Decision 2003/24/EC (2) .

The original certificate of inspection shall be a printed and hand-signed copy of the completed electronic certificate in TRACES or, alternatively, a certificate of inspection signed in TRACES with an advanced electronic signature within the meaning of Article 3(11) of Regulation (EU) No 910/2014 of the European Parliament and of the Council (3) or with an electronic signature offering equivalent assurances with regard to the functionalities attributed to a signature by applying the same rules and conditions as those laid down in the Commission's provisions on electronic and digitised documents, set out in the Annex to Commission Decision 2004/563/EC, Euratom (4) .

When the original certificate of inspection is a printed and hand-signed copy of the completed electronic certificate in TRACES, control authorities, control bodies, relevant Member State's competent authorities and the first consignee shall verify at each stage of issuing, endorsement and reception of the certificate of inspection that this copy corresponds to the information indicated in TRACES.

3. To be accepted for endorsement, the certificate of inspection shall have been issued by the control authority or control body of the producer or the processor of the product concerned or, where the operator carrying out the last operation for the purposes of preparation is different from the producer or processor of the product, by the control authority or control body of the operator carrying out the last operation for the purposes of preparation as defined in Article 2(i) of Regulation (EC) No 834/2007.

That control authority or control body shall be:

(a) a control authority or control body listed in Annex III to this Regulation for the products concerned and for the third country in which the products have their origin, or, where applicable, in which the last operation for the purposes of preparation has been carried out; or

(b) a control authority or control body listed in Annex IV to this Regulation for the products concerned and for the third country in which the products have their origin or in which the last operation for the purposes of preparation has been carried out.

4. The control authority or control body issuing the certificate of inspection shall only issue the certificate of inspection and sign the declaration in box 18 of the certificate after it has carried out a documentary check on the basis of all relevant inspection documents, including in particular the production plan for the product concerned, transport documents and commercial documents and, as appropriate according to its risk assessment, it has carried out a physical check of the consignment.

However, for processed products, if the control authority or control body issuing the certificate of inspection is a control authority or control body listed in Annex III, it shall only issue the certificate of inspection and sign the declaration in box 18 of the certificate after it has verified that all organic ingredients of the product have been controlled and certified by a control authority or control body recognised by the third country concerned listed in that Annex, or if the issuing control authority or control body is a control authority or control body listed in Annex IV, it shall only issue the certificate of inspection and sign the declaration in box 18 of the certificate after it has verified that all organic ingredients of such products have been controlled and certified by a control authority or control body listed in Annex III or IV or have been produced and certified in the Union in accordance with Regulation (EC) No 834/2007.

Where the operator carrying out the last operation for the purposes of preparation is different from the producer or processor of the product, the control authority or control body issuing the certificate of inspection and listed in Annex IV shall only issue the certificate of inspection and sign the declaration in box 18 of the certificate after it has carried out a documentary check on the basis of all relevant inspection documents, including transport documents and commercial documents, it has verified that the production or the processing of the product concerned has been controlled and certified by a control body or control authority recognised for the products concerned and the country concerned in accordance with Article 33(3) of Regulation (EC) No 834/2007 and it has carried out, as appropriate according to its risk assessment, a physical check of the consignment.

At the request of the Commission or of the competent authority of a Member State, the control authority or control body issuing the certificate of inspection in accordance with the second and third subparagraphs shall make available without delay the list of all operators in the organic production chain and the control authorities or control bodies under whose control those operators have placed their operations.

5. The certificate of inspection shall be made in one single original.

The first consignee or, where relevant, the importer may make a copy of the certificate of inspection for the purpose of informing the control authorities and control bodies in accordance with Article 83 of Regulation (EC) No 889/2008. Any such copy shall carry the indication ‘ COPY ’ printed or stamped thereon.

6. At the verification of a consignment, the relevant Member State's competent authority shall endorse the original certificate of inspection in box 20 and shall return it to the person who submitted the certificate.

7. The first consignee shall, at the reception of the consignment, complete box 21 of the certificate of inspection, to certify that the reception of the consignment has been carried out in accordance with Article 34 of Regulation (EC) No 889/2008.

The first consignee shall then send the original of the certificate to the importer mentioned in box 11 of the certificate for the purposes of the second subparagraph of Article 33(1) of Regulation (EC) No 834/2007.]

Textual Amendments

F1 Substituted by Commission Implementing Regulation (EU) 2016/1842 of 14 October 2016 amending Regulation (EC) No 1235/2008 as regards the electronic certificate of inspection for imported organic products and certain other elements, and Regulation (EC) No 889/2008 as regards the requirements for preserved or processed organic products and the transmission of information (Text with EEA relevance).

(1)

[F1 Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code ( OJ L 269, 10.10.2013, p. 1 ).]

(2)

[F1 Commission Decision 2003/24/EC of 30 December 2002 concerning the development of an integrated computerised veterinary system ( OJ L 8, 14.1.2003, p. 44 ).]

(3)

[F1 Regulation (EU) No 910/2014 of the European Parliament and of the Council of 23 July 2014 on electronic identification and trust services for electronic transactions in the internal market and repealing Directive 1999/93/EC ( OJ L 257, 28.8.2014, p. 73 ).]

(4)

[F1 Commission Decision 2004/563/EC, Euratom of 7 July 2004 amending its Rules of Procedure ( OJ L 251, 27.7.2004, p. 9 ).]

Textual Amendments

F1 Substituted by Commission Implementing Regulation (EU) 2016/1842 of 14 October 2016 amending Regulation (EC) No 1235/2008 as regards the electronic certificate of inspection for imported organic products and certain other elements, and Regulation (EC) No 889/2008 as regards the requirements for preserved or processed organic products and the transmission of information (Text with EEA relevance).