- Latest available (Revised)
- Point in Time (20/02/2008)
- Original (As adopted by EU)
Regulation (EC) No 216/2008 of the European Parliament and of the Council of 20 February 2008 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency, and repealing Council Directive 91/670/EEC, Regulation (EC) No 1592/2002 and Directive 2004/36/EC (Text with EEA relevance) (repealed)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
Version Superseded: 11/09/2018
Point in time view as at 20/02/2008.
There are currently no known outstanding effects for the Regulation (EC) No 216/2008 of the European Parliament and of the Council (repealed), ANNEX III.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
air law;
aircraft general knowledge;
technical matters related to the category of the aircraft;
flight performance and planning;
human performance and limitations;
meteorology;
navigation;
operational procedures, including resource management;
principles of flight;
communications; and
non-technical skills, including the recognition and management of threats and errors.
pre-flight and in-flight activities, including aircraft performance, mass and balance determination, aircraft inspection and servicing, fuel planning, weather appreciation, route planning, airspace restrictions and runway availability;
aerodrome and traffic-pattern operations;
collision avoidance precautions and procedures;
control of the aircraft by external visual reference;
flight manoeuvres, including in critical situations, and associated ‘upset’ manoeuvres, as technically achievable;
normal and cross-wind take-offs and landings;
flight by reference solely to instruments, as appropriate to the type of activity;
operational procedures, including team skills and resource management, as appropriate to the type of operation, whether single or multi-crew;
navigation and implementation of rules of the air and related procedures, using as appropriate, visual reference or navigation aids;
abnormal and emergency operations, including simulated aircraft equipment malfunctions;
compliance with air traffic services and communications procedures;
aircraft type or class specific aspects;
additional practical skill training that may be required to mitigate risks associated with specific activities; and
non-technical skills, including the recognition and management of threats and errors, using an adequate assessment methodology in conjunction with the technical skills assessment.
operating the aircraft within its limitations;
completing all manoeuvres with smoothness and accuracy;
exercising good judgement and airmanship;
applying aeronautical knowledge;
maintaining control of the aircraft at all times in a manner such that the successful outcome of a procedure or manoeuvre is assured; and
non-technical skills, including the recognition and management of threats and errors, using an adequate assessment methodology in conjunction with the technical skills assessment.
A pilot must have demonstrated language proficiency to a degree appropriate to the functions exercised on the aircraft. Such demonstrated proficiency shall include:
the ability to understand weather information documents;
the use of aeronautical en-route, departure and approach charts and associated aeronautical information documents; and
the ability to communicate with other flight crew and air navigation services during all phases of flight, including flight preparation.
When a flight simulation training device (FSTD) is used for training, or for demonstration that practical skill is acquired or maintained, this FSTD must be qualified to a given level of performance in those areas, which are relevant to completing the related task. In particular, the replication of configuration, handling qualities, aircraft performance, and systems behaviour must adequately represent the aircraft.
a syllabus must be developed for each type of course; and
the training course must comprise a breakdown of theoretical knowledge and practical flight instruction (including synthetic training), if applicable.
Theoretical instruction must be given by appropriately qualified instructors. They must:
have appropriate knowledge in the field where instruction is to be given; and
be capable of using appropriate instructional techniques.
Flight and flight simulation instruction must be given by appropriately qualified instructors, who have the following qualifications:
meet the theoretical knowledge and the experience requirements appropriate for the instruction being given;
be capable of using appropriate instructional techniques;
have practised instructional techniques in those flight manoeuvres and procedures in which it is intended to provide flight instruction;
have demonstrated the ability to instruct in those areas in which flight instruction is to be given, including pre-flight, post-flight and ground instruction; and
receive regular refresher training to ensure that the instructional standards are maintained up to date.
Flight instructors must also be entitled to act as pilot in command on the aircraft for which instruction is being given, except for training on new aircraft types.
meet the requirements for flight or flight simulation instructors;
be capable of assessing pilot performance and conducting flight tests and checks.
have all the means necessary for the scope of responsibilities associated with their activity. These means comprise, but are not limited to, the following: facilities, personnel, equipment, tools and material, documentation of tasks, responsibilities and procedures, access to relevant data and record-keeping;
implement and maintain a management system relating to safety and the standard of training, and aim for continuous improvement of this system; and
establish arrangements with other relevant organisations, as necessary, to ensure continuing compliance with the above requirements.
Medical fitness, comprising physical and mental fitness, means not suffering from any disease or disability, which makes the pilot unable:
to execute the tasks necessary to operate an aircraft; or
to perform assigned duties at any time; or
to perceive correctly his/her environment.
be qualified and licensed in the practice of medicine;
have received training in aviation medicine and regular refresher training in aviation medicine to ensure that assessment standards are maintained;
have acquired practical knowledge and experience of the conditions in which pilots carry out their duties.
have all the means necessary for the scope of responsibilities associated with their privileges. These means comprise, but are not limited to, the following: facilities, personnel, equipment, tools and material, documentation of tasks, responsibilities and procedures, access to relevant data and record-keeping;
implement and maintain a management system relating to safety and the standard of medical assessment, and aim for continuous improvement of this system;
establish arrangements with other relevant organisations, as necessary, to ensure continuing compliance with these requirements.
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: